Shure PGXD Bedienungsanleitung

Shure PGXD Wireless

PGXD Wireless System

PGXD sans fil de Shure

Shure PGXD Sem Fio

27B14513 (Rev. 2)

Printed in U.S.A.

PGX Digital Wireless Systems

Offering uniquely tailored wireless solutions for

vocalists, guitarists, and presenters, PGX-Digital

combines the trusted legacy of Shure wired

microphones with state-of-the-art, 24-bit digital

wireless technology to deliver strong, clean RF

performance. The result is wireless audio that

sounds like wired, rock-steady RF signal even at

extended distances, and plug-and-play setup and

operation.

• Professional quality 24-bit digital audio

• Digital RF technology for rock-solid

performance

• Wide variety of rugged and dependable Shure

microphones

• One-touch setup and operation

• Up to 10 hours of battery life (9 hours,

PGXD2)

• Up to 200 foot range (line-of-sight)

• 900 MHz operation—free from white spaces or

DTV interference

System Components

All systems include

• PGXD4 receiver

• 2 AA alkaline batteries

• Power supply

• User guide

Vocalist systems include

• PGXD2 handheld transmitter

• Microphone head (choice of PG58, SM58®,

SM86, Beta 58A® or Beta 87A*)

• Microphone clip

* Available only in select markets

Lavalier, Headworn, and Instrument

systems include

• PGXD1 bodypack transmitter

• Microphone (choice of WL93, WL185, PG30 or

Beta 98H/C)

Receiver Controls and Connectors

① audio LED

Indicates strength

of incoming audio

signal: green for

normal, amber for

strong and red for

clipping.

② LED Screen

Displays group and

channel setting.

See “Single System

Setup” for details.

③ channel button

Changes group and

channel setting.

See “Single System

Setup” for details.

④ ready LED

Indicates system ready and receiving

an RF signal from the transmitter.

Also indicates battery level of the

transmitter:

• Green = transmitter battery level

normal

• Red = low battery (typically less

than 60 minutes with alkaline

batteries)

Note: with NiMH rechargeable batter-

ies, when the indicator turns red there

will be little to no remaining life.

⑤ Infrared (IR) port

Sends IR signal to

transmitter for sync.

⑥ sync button

Press to

synchronize

transmitter with

receiver group

and channel

settings.

PGXD

PGXD4

Guitar systems include

• PGXD1 bodypack transmitter

• 1/4” to mini 4-pin guitar cable

(WA302)

⑦ AC adapter jack

⑧ Adapter cord tie-off

⑨ XLR microphone output jack

⑩ 6.35 mm (1/4”) instrument

level output jack

Transmitter Controls and Connectors

① Indicator LED

Displays battery level, mute, and IR transmission

status (see table).

② Power / Mute Switch

Press to mute or unmute. Press and hold to power

on or off.

③ Infrared (IR) port

Receives infrared beam to synchronize frequencies.

When using multiple systems, only one

transmitter IR port should be exposed at a time.

④ 4-Pin Microphone Input Jack

⑤ Audio Gain Adjustment

PGXD2

PGXD1

PGXD

BIAS

AUDIO

0dB -10dB

PGXD

LED Indicator Status

Green Ready

Flashing green Controls locked

Amber Mute on

Solid red Battery power low

Flashing red Batteries dead (change

batteries to power on

transmitter)

Rapidly flashing red IR transmission in process

Flashing amber and

red

Battery power low and mute

Transmitter Indicator LED

INSTRUMENT

MIC

BIAS

AUDIO

0dB -10dB

AUDIO

0dB -10dB

Wearing the Bodypack Transmitter

Clip the transmitter to a belt or slide a guitar strap

through the transmitter clip as shown.

For best results, slide the transmitter until the belt is

pressed against the base of the clip.

Adjusting Gain

Handheld Transmitter

Access the gain switch by unscrewing the head of

the microphone.

Use the tip of a pen or a small screwdriver to move

the switch.

• 0dB: For quiet to normal vocal performance.

• –10dB: Use only if audio is distorted due to high

vocal levels.

PGXD

Batteries

• A fresh set of alkaline batteries lasts up to 10

hours (9 hours, PGXD2).

• The transmitter LED and the receiver ready

LED glow red to indicate low battery (typically

less than 60 minutes remaining).

• NiMH rechargeable batteries may be used.

However, the low battery indicator functions

differently. When it turns red, there may be little

to no remaining life.

• When the LED flashes red, the batteries must

be replaced to power on the transmitter.

PGXD

Bodypack Transmitter

The bodypack has 26 dB of audio gain

adjustment.

• Increase gain (clockwise +) for microphones

• Decrease gain (counterclockwise –) for guitars

or high-output instruments

For best audio quality, set transmitter gain so the audio

LED on the receiver flickers green and amber during the

performance. Decrease gain if the signal clips (LED turns

red).

Note: The amber LED may appear to be red when

viewed at an angle. For best results, monitor the LED

from directly in front.

channel

Single System Setup

Scan

Use the scan feature on the receiver to

find a clear channel.

LED screen displays

current channel

press channel

button to scan for a

clear channel

system scans for the channel

with the least interference

Synchronize

Synchronize the transmitter to the receiver by aligning the

infrared (IR) ports and pressing the sync button. Make sure

the IR ports are closely aligned.

After a successful sync, the transmitter LED momentarily

flashes red and the receiver ready light illuminates.

Multiple System Setup

NOTE: This wireless system may be affected by RF inter-

ference when used in proximity to other wireless devices

such as cordless phones, baby monitors, and two-way ra-

dios. For best results, use the scan and sync feature before

each use or if you experience problems.

Use the following steps to ensure the best performance when installing multiple wire-

less systems at the same location.

1. Turn all receivers on and all transmitters off.

Note: Turn on any other digital equipment that could cause interference during

the performance so it will be detected during the frequency scans in the following

steps.

2. Make sure the group number is the same for all receivers (see Manual Group

Selection).

3. Perform a scan using the first receiver.

4. Turn on the first transmitter and sync it to the receiver.

5. Repeat for each system.

• Important: After syncing each transmitter, leave it on so that scans from the other

receivers will not select that channel.

• Be sure only one transmitter IR port is exposed when synchronizing each system.

Compatible Frequencies

When operating multiple systems simultaneously, choose one group from the following

table and set all systems to different channels within that group.

Number of

Systems

Group (by band)

X8 X8A

(Austrailia)

X8B (Brazil)

2 3 to 9 3 to 9 3 to 9

3 3 to 9 3 to 9 3 to 9

4 3 to 9 -- 3 to 9

5 7 to 9 -- --

Andere Handbücher für PGXD

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shure Mikrofonsystem Handbücher

Shure

Shure BLX Series Bedienungsanleitung

Shure

Shure BLX4R Bedienungsanleitung

Shure

Shure GLXD Plus FM Bedienungsanleitung

Shure

Shure MXW Bedienungsanleitung

Shure

Shure QLX-D Series Bedienungsanleitung

Shure

Shure QLX-D Bedienungsanleitung

Shure

Shure GLX-D Bedienungsanleitung

Shure

Shure SCM800 Bedienungsanleitung

Shure

Shure ULX M1 Betriebsanleitung

Shure

Shure ULX Wireless System Bedienungsanleitung

Shure

Shure PSM1000 Bedienungsanleitung

Shure

Shure BLX Wireless System Bedienungsanleitung

Shure

Shure Microflex MXW Bedienungsanleitung

Shure

Shure PSM 900 Bedienungsanleitung

Shure

Shure ULX-D Bedienungsanleitung

Shure

Shure QLX-D Bedienungsanleitung

Shure

Shure T4 Bedienungsanleitung

Shure

Shure UA844 Bedienungsanleitung

Shure

Shure LX Wireless System Bedienungsanleitung

Shure

Shure UHF MD Betriebsanleitung

Shure

Shure UHF-R Wireless Bedienungsanleitung

Shure

Shure DuraPlex DH5 Bedienungsanleitung

Shure

Shure LX1 Bedienungsanleitung

Shure

Shure UHF-R Wireless Bedienungsanleitung

Beliebte Mikrofonsystem Handbücher anderer Marken

Paso

Paso R824 Bedienungsanleitung

Naxa

Naxa NAM-982 Bedienungsanleitung

Motorola

Motorola PMNN4461 Bedienungsanleitung

Xvive

Xvive U3 Bedienungsanleitung

Tekon

Tekon DUOS Bedienungsanleitung

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Bedienungsanleitung

Devine

Devine WMD-IE Bedienungsanleitung

LG LF-D7150 Bedienungsanleitung

GE S768DAV Bedienungsanleitung

LD U305 HBH 2 Bedienungsanleitung

Chainway

Chainway URA8 Bedienungsanleitung

ORATOR

ORATOR D860TD Bedienungsanleitung

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Bedienungsanleitung

Alpha Technologies

Alpha Technologies RBMS Bedienungsanleitung

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Bedienungsanleitung

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Bedienungsanleitung

Pyle

Pyle PDWM5000 Bedienungsanleitung

Airspan

Airspan AS4000 Leitfaden