Shure 550L Bedienungsanleitung

Model 550L User Guide

Shure Brothers Incorporated

222 Hartrey Avenue

Evanston IL 60202-3696 U.S.A.

27A8090 (RB)

E1998, Shure Brothers Incorporated Printed in U.S.A.

MODEL 550L

OMNIDIRECTIONAL DYNAMIC

BASE STATION MICROPHONE

The Shure 550L is a dynamic base station micro-

phone with a frequency response specially tailored for

voice intelligibility. It is equally useful for radio commu-

nications, paging and dispatching systems, and its

low-impedanceconnectionmakesitadaptabletomost

PA amplifiers. The low-impedance design also makes

itusefulforlongruns,orunderseverehumdisturbance

conditions.

Themicrophoneisnotaffectedbyheatorhumidity.

Its exclusive ARMO-DURRcase is immune to oil,

grease, fumes, salt spray, sun, rust, and corrosion

—and is outstanding in its ability to resist mechanical

shocks and vibration. The “Million-Cycle” leaf-type

switch is designed to withstand rigorous operating

conditions and constant use.

Features

•

Low-impedance operation for long cable runs or

severe hum disturbance

•

Crisp, natural, high-intelligibility voice response

•

Fingertip control bar actuates microphone circuit

and external relay or control circuit

•

Long-life switch meets rigorous requirements of

communications and paging systems

•

Sturdy, high-impact ARMO-DUR base and micro-

phone case—impervious to corrosion

•

Reliability plus—under all operating conditions

•

Neoprene feet prevent microphone slipping

PRESS-TO-TALK SWITCH OPERATION

The fingertip control bar is a non-locking switch;

simply depress the control bar and release after trans-

mission.

CONNECTIONS

Figure 1 shows the internal wiring of the 550L

microphone. The 550L is designed for balanced-line,

low-impedance operation. The WHITE and GREEN

cableleads arethe twoconductors forthe microphone

circuit; the shield is connected to the amplifier or chas-

sis ground. The RED and BLACK leads control an ex-

ternal relay or switching circuit.

RED

ORANGE

RED

BLACK

WHITE

GREEN

SHIELD

TRANSMIT

INTERNAL CONNECTIONS

FIGURE 1

Low-impedance operation is extremely useful

wherelongcable lengthsarerequired, or undercondi-

tions of severe hum disturbance. The permissible

cable length is practically unlimited, since neither re-

sponse nor level is appreciably affected. Shure A95

Series Line Matching Transformers are available for

use in those cases where a low-impedance micro-

phone is to be used with an amplifier with a high-

impedanceinput.Thesetransformersprovideaproper

impedance match between a 19- to 300-ohm micro-

phone and a high-impedance input, and are available

with various input and output connectors.

SPECIFICATIONS

Type

Dynamic

Frequency Response

150 to 6,000 Hz (see Figure 2)

TYPICAL FREQUENCY RESPONSE

FIGURE 2

Polar Pattern

Omnidirectional

Impedance (at 1,000 Hz)

Microphone rating impedance is 150 ohms (220

ohms actual) for connection to microphone in-

puts rated at 75 to 300 ohms

Output Level (at 1,000 Hz)

Open Circuit Voltage* –74.0 dB (0.2mV)

. . . . . . . .

Power Level** –53.5 dB. . . . . . . . . . . . . . . . . . . . . . . .

*0 dB = 1 volt per microbar

**0 dB = 1 milliwatt per 10 microbars

Switch

Press-to-Talk Switch actuates microphone circuit

and external relay or control circuit. Microphone

circuit normally open.

Cable

2.1m (7 ft) four-conductor, two conductor

shielded, non-detachable

Case

Brown ARMO-DURRwith dull chrome-plated

steel screen

Dimensions

See Figure 3

OVERALL DIMENSIONS

FIGURE 3

Net Weight

836 grams (1 lb 13-1/2 oz)

Shipping Weight

1.12 kilograms (2 lb 7-1/2 oz)

REPLACEMENT PARTS

Cartridge R50

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cable C32C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switch RK321S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

For additional service or parts information, please

contact Shure’s Service Department at 1–800–

516–2525. Outside the United States, please contact

your authorized Shure Service Center.

Andere Shure Mikrofon Handbücher

Shure

Shure 527A Bedienungsanleitung

Shure

Shure Microflex MX405 Bedienungsanleitung

Shure

Shure Easyflex EZG Series Bedienungsanleitung

Shure

Shure Microflex MX400SE Series Bedienungsanleitung

Shure

Shure SCM810 Bedienungsanleitung

Shure

Shure Microflex MX400SE Series Bedienungsanleitung

Shure

Shure Microflex MX405/C Bedienungsanleitung

Shure

Shure WH10 Bedienungsanleitung

Shure

Shure PG27 Bedienungsanleitung

Shure

Shure 575S Bedienungsanleitung

Shure

Shure WL93 Bedienungsanleitung

Shure

Shure 568SA-LC Bedienungsanleitung

Shure

Shure W10BT Bedienungsanleitung

Shure

Shure SM57 Bedienungsanleitung

Shure

Shure KSM109/SL Bedienungsanleitung

Shure

Shure MV7X Bedienungsanleitung

Shure

Shure CVO-B/C Bedienungsanleitung

Shure

Shure PGA 98D Bedienungsanleitung

Shure

Shure WCM16 ISOMAX Bedienungsanleitung

Shure

Shure Easyflex EZO series Bedienungsanleitung

Shure

Shure MX202W-A/C Bedienungsanleitung

Shure

Shure PGA 98H Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

Shure

Shure KSM9 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung