Shure PGA27 Bedienungsanleitung

27A27347 (Rev. 3)

PG ALT TM

A SERIES

WIRED MICROPHONE

PGA27

USER GUIDE

PGA27

Congratulations on the purchase of a new Shure PG Alta

series microphone. The PG Alta series delivers professional

quality audio at an affordable price, with solutions for

capturing nearly any source, including voice, acoustic

instruments, drums, and amplified electric instruments.

Suitable for live and studio applications, PG Alta microphones

are built to last, and meet the same rigorous quality testing

standards that make all Shure products trustworthy and

reliable.

General Rules for Use

• Do not cover any part of the microphone grille with your

hand, as this will adversely affect microphone performance.

• Aim the microphone toward the desired sound source

(such as the talker, singer, or instrument) and away from

unwanted sources.

• Place the microphone as close as practical to the desired

sound source.

• Work close to the microphone for extra bass response.

• Use only one microphone to pick up a single sound source.

• For better gain before feedback, use fewer microphones.

• Keep the distance between microphones at least three

times the distance from each microphone to its source

(“three to one rule”).

• Place microphones as far as possible from reflective

surfaces.

• Add a windscreen when using the microphone outdoors.

• Avoid excessive handling to minimize pickup of mechanical

noise and vibration.

Connecting to a Mixer or Computer

Cables

Use only balanced (three-conductor) cables. Otherwise,

the cable will not carry phantom power to the microphone.

If using an adapter for 6.5mm (1/4") inputs, it must have

tip-ring-sleeve (TRS) contacts.

Computer

To deliver audio directly to a computer, use a USB audio

interface with an XLR microphone input that provides

+48V phantom power, such as the Shure MVi.

USB

XLR

Connecting to a computer using the Shure MVi audio interface

PG Alta Microphones

Mixer

When connecting to a mixer, use only balanced, microphone-level inputs with phantom power. Most mixers have a switch

for phantom power, so make sure phantom power is on for that channel.

Phantom Power

All condenser microphones require phantom power to operate. This microphone performs best with a 48 V DC supply (IEC-

61938), but it can operate with lower voltages.

Phantom power is provided by the mixer or audio interface that the microphone is connected to, and requires the use of a

balanced microphone cable: XLR-to-XLR or XLR-to-TRS. In most cases, there is a switch or button to activate the phantom

power. See the user guide for the mixer or interface for additional information.

Operation

Positioning the Microphone

The front of the microphone is marked by the logo.

Position this side toward the sound source.

Mounting the Microphone

Use the supplied shockmount to mount the microphone. To

secure the microphone, place it in the shockmount and tighten

the ring at the bottom.

Proximity Effect

Directional microphones progressively boost bass frequencies

as the microphone is placed in closer proximity to the source.

This phenomenon, known as proximity effect, can be used to

create a warmer, more powerful sound.

Setting Attenuation

The attenuation switch lets you reduce the signal level without altering the frequency response. This can prevent extremely loud

sounds from overloading the microphone.

0dB For "quiet" to "normal" sound levels.

-15dB For use with extremely loud sound sources such as drums, horns, or loud guitar cabinets.

Low-Frequency Response Switch

The low-frequency response switch changes the frequency response of the microphone.

Flat response (bypass)

This setting provides natural sound with no low-frequency reduction. Use the flat setting when recording sources that

extend into the low-frequency range (piano, bass, percussion, etc.).

Low frequency cutoff

This setting provides a reduction in low frequencies to reduce noise or shape the tone. Use this setting to:

- Reduce floor rumble and low-frequency room noise from heating and air conditioning systems

- Decrease the volume of low frequencies that cause instruments to sound dull or muffled

- Shape the tone on sources which do not produce much bass (violin, acoustic guitar, flute, etc.)

- Reduce plosives (the pop that is heard when a vocalist says a word starting with the letter P). If possible, use a pop filter

alone or in combination with the low-frequency reduction setting.

Applications

The following table provides a basic starting point for several instruments. Shure offers additional educational publications on

microphone placement and recording techniques. Visit www.shure.com for more information.

Application Distance from source Tips

Voice 1-3 inches (2-8 cm) Use a pop filter (Shure PS-6) to prevent plosives.

Acoustic guitar 6-12 inches (15-30 cm) Place near the sound hole for a full sound, or near the

12th fret for a balanced, natural sound.

Drums 3-6 feet (1-2 m) Place in front of the drum kit to capture more of the kick

drum, or as an overhead (above the kit, facing down) to

capture more cymbals. Consider using additional Shure

microphones placed on individual drums for more mixing

flexibility and a thicker sound.

Amplifiers 1-6 inches (2-15 cm) Aim towards the center of the speaker for a clear,

aggressive sound, or towards the edge of the speaker for

a mellow sound.

Strings or horns 1-6 feet (30 cm - 2 m) For a single instrument, place the microphone close to

the source. For a horn or string section, arrange players

at an equal distance from the microphone.

Full band Facing towards the

group, centered

between instruments

Use the -15 db attenuation switch if the band is very loud

to prevent distortion.

Tip: Close microphone placement results in a full sound due to the proximity effect. Placing the microphone farther from the

source results in more room ambience.

7.6 m (25 ft.) Cable (XLR-XLR) C25J

5/8" to 3/8" Thread Adapter 31A1856

Microphone Stand Adapter 95A15045

ShureLock®Rubber Isolated Shock Mount A27SM

Popper Stopper®Pop Filter with Metal Gooseneck and

Microphone Stand Clamp

PS-6

Black Foam Windscreen for BETA 27, KSM27, KSM32,

KSM42, KSM44, KSM44A, PG27, PG42 and SM27

A32WS

Specifications

Type

Electret Condenser

Polar Pattern

Cardioid

Frequency Response

20 to 20,000 Hz

Output Impedance

at 1 kHz, open circuit voltage

115Ω,actual

Sensitivity

at 1 kHz, open circuit voltage

-35 dBV/Pa [1] (17.8 mV)

Maximum SPL

1 kHz at 1% THD, 1 kΩ load

130 dB SPL Pad Off (145 dB SPL Pad On)

Polarity

Positive pressure on diaphragm produces positive voltage on pin 2

with respect to pin 3

Switch

15 dB Pad, High Pass Filter

Connector

Three-pin professional audio (XLR), male

Weight

453 g (1.0 lbs)

Housing

Cast Zinc

Power Requirements

48 V DC phantom power (3.9 mA)

[1] 1 Pa=94 dB SPL

-30

-25

-20

-15

-10

-5

20 100 1k 10k 20k

0,61 m (2 ft.) from sound source

Typical Frequency Response

1,000 Hz

Typical Polar Pattern

Optional Accessories and Replacement Parts

Certifications

This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: 49-7262-92 49 0

Fax: 49-7262-92 49 11 4

Email: [email protected]

152.8 mm (6.02 in.)

55.9 mm diameter (2.2 in.)

PT. GOSHEN SWARA INDONESIA

Kompleks Harco Mangga Dua Blok L No. 35 Jakarta Pusat

I.16.GSI31.00501.0211

Europe, Middle East, Africa:

Andere Handbücher für PGA27

Inhaltsverzeichnis

Andere Shure Mikrofon Handbücher

Shure

Shure Easyflex EZO series Bedienungsanleitung

Shure

Shure WH20 Bedienungsanleitung

Shure

Shure Microflex MX395 Bedienungsanleitung

Shure

Shure UNIDYNE 580SA Bedienungsanleitung

Shure

Shure Microflex MX391 Series Bedienungsanleitung

Shure

Shure Unisphere I PE566 Bedienungsanleitung

Shure

Shure UNI- DYNE B 15SB-GI8 Bedienungsanleitung

Shure

Shure Microflex SM102 Bedienungsanleitung

Shure

Shure SM7dB Technisches Handbuch

Shure

Shure ROSWELLITE KSM353 Bedienungsanleitung

Shure

Shure Microflex MX391 Series Bedienungsanleitung

Shure

Shure SM10A Bedienungsanleitung

Shure

Shure STARMAKER SM77 Bedienungsanleitung

Shure

Shure UNIDYNE III Series Bedienungsanleitung

Shure

Shure VR230B Bedienungsanleitung

Shure

Shure Microflex MX400D Series Bedienungsanleitung

Shure

Shure SM98 Bedienungsanleitung

Shure

Shure SM35-TQG Bedienungsanleitung

Shure

Shure Beta 53 Bedienungsanleitung

Shure

Shure KSM32 Bedienungsanleitung

Shure

Shure VP88 Bedienungsanleitung

Shure

Shure PG185 Bedienungsanleitung

Shure

Shure KSM9HS Bedienungsanleitung

Shure

Shure Microflex Advance MXA910 Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

JLab

JLab GO TALK Bedienungsanleitung

Renkforce

Renkforce TY-109 Bedienungsanleitung

Trust

Trust 31008 Bedienungsanleitung