Shuttle AB60/R Bedienungsanleitung
AB60/R
Pentium4/Celeron
478-pin Processor Based MAIN BOARD
User's Manual
Shuttle®AB60/R
Pentium 4/Celeron , 478-pin processor based Mainboard
Manual Version 1.2
Copyright
Copyright©2003 by Shuttle®Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel, Pentium are registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.
M829
Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName:AB60/R
S/N:N/A
CPU:
External Frequency: 100 MHz
IntelPentium4: 2.0/2.4/2.5/2.6GHz
External Frequency: 133 MHz
IntelPentium4: 2.4/ 2.53/2.8/3.06GHz
External Frequency: 200 MHz
Intel Pentium4: 2.8/ 3.0/3.2GHz
Keyboard Port: one port with 6 pins
Mouse Port: one port with 6 pins
USB 2.0 Port: four ports with 4 pins respectively
1394 Port: three port with 6 pins
VGA Port: one port with 15 pins
RJ45 Port: one port with 8 pins
S-Port Connector: one port for each
MIDI Port: two ports for each
Earphone-Out & Line-In & Mic-In Ports: one port for each
DDR Memory: Apacer 256 MB *2
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
Test Mode External Frequency CPU Case Open/Closed
1 200MHz P4 3.2 GHz Closed
2 200MHz P4 3.2 GHz Open
3 133MHz P4 3.06 GHz Closed
4 133MHz P4 3.06 GHz Open
5 100MHz P4 2.6 GHz Closed
6 100MHz P4 2.6 GHz Open
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:32.768KHz(X1)/14.318MHz(X2)/24.576(X3)/25.0MHz(X4)/
25.0MHz(X5)
Clock Generator: CLK1
(D) Supported Host Peripherals:
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name S/N FCC ID
#1 Case KF45A N/A
#2 Power Supply (300W) ENP-0730 (ATX12V) 1000002885
#3 IBM HDD (30.7GB) 91024UB YKFY7981 3892I168
#4 MITSUMI FDD D353M
#5 SONY VCD Player CDU4811 3892A291
#6 AGP Card Winfast Geforce 2 MX 3892C520
#7 Power Cable Detachable and Shielded
- 1 -
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIY USER ........................................................................ 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 9
2.1 SPECIFICATIONS ....................................................................................... 9
3 HARDWARE INSTALLATION..........................................................12
3.1 STEP BY STEP INSTALLATION............................................................... 12
Accessories of AB60/R......................................................................... 12
STEP1 Installthe CPU .......................................................................... 13
STEP 2 Set Jumpers............................................................................. 14
STEP3 InstallDDRSDRAM SystemMemory........................................ 14
STEP4 InstallPeripheralsin SystemCase............................................ 15
STEP5 Mountthe Mainboard onthe ComputerChassis........................ 16
STEP6 ConnectFrontPanelSwitches/LEDs/Speaker/USB.................. 17
STEP 7 Connect IDE/ Floppy Disk/ SerialATADrives............................ 18
STEP8Connect OtherInternalPeripherals............................................ 19
STEP9 ConnectthePower Supply........................................................ 20
STEP10 InstallAdd-on Cards inExpansion Slots .................................. 20
STEP11 Connect External Peripherals toBack Panel .......................... 21
STEP 12 First Time System Boot Up ..................................................... 22
STEP13 InstallDrivers & SoftwareComponents ................................... 23
TABLE OF CONTENTS
- 2 -
3.2 JUMPER SETTINGS ................................................................................. 24
JUMPERS& CONNECTORSGUIDE.................................................... 25
Jumpers
Clear CMOS Setting (JP2) ................................................................... 27
DisabledIEEE1394 Setting (JP8)(AB60R Only) .................................... 28
Disabled RAID Setting(JP9)(AB60R Only) ........................................... 28
Back-Panel Connectors
PS/2Keyboard & PS/2 Mouse Connectors............................................ 29
ParallelPortConnector.......................................................................... 29
COM1/2PortConnectors ...................................................................... 29
USB1/USB2Port Connectors ................................................................ 29
10/100/1000base-T LANPort Connector.............................................. 30
USB3/USB4Port Connectors ................................................................ 30
Line-Out PortConnector ....................................................................... 30
Line-InPortConnector ........................................................................... 30
Mic-InPortConnector ............................................................................ 30
Front-Panel Connectors
HDD LED Connector (HLED) ................................................................ 31
HardwareReset Connector (RST)......................................................... 31
EPMIConnector(EPMI)......................................................................... 32
SpeakerConnector (SPEAKER) ........................................................... 32
GreenLED Connector (GLED) .............................................................. 33
ATXPower On/OffSwitch Connector(PWR ON).................................... 33
PowerLED Connector (PWRLED) ........................................................ 34
Internal Peripherals Connectors
EnhancedIDE andFloppy Connectors................................................... 34
Other Connectors
ATXPower Supply Connectors (ATX1&ATX2)....................................... 35
- 3 -
CoolingFan Connectors for CPU(FAN1),AGP (FAN2), System(FAN3) 36
IRHeader(J1) ....................................................................................... 36
CD-IN Connectors(CN4/CN5) ............................................................... 37
Audio Auxiliary_INConnector(CN6)...................................................... 37
Center/Bass_Out Header(CN2) ........................................................... 38
FrontPanelAudio Header (JP3) ............................................................ 38
SPDIFExt Header (JP4) ....................................................................... 38
ExtendedUSB Connector(USB3/USB4) ............................................... 39
IEEE1394Connector (JP5/JP6/JP7)(AB60R Only)................................ 39
WOLConnector(WOL1)........................................................................ 40
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 40
1.INSTALLMEMORY ............................................................................ 40
2.UPGRADEMEMORY ........................................................................ 41
4 SOFTWARE UTILITY ......................................................................42
4.1 Mainboard CD Overview ......................................................................... 42
4.2 Install Mainboard Software ..................................................................... 42
4.2.A InstallIntelChipsetDriver ................................................................. 44
4.2.B InstallUSB 2.0Driver ....................................................................... 44
4.2.C InstallAudio Driver........................................................................... 45
4.2.D InstallIntelLANDriver ...................................................................... 45
4.2.E InstallRAID Driver(AB60R Only)...................................................... 46
4.2.F InstallSiICfgInstallationUtility (AB60ROnly)..................................... 46
4.3 View the User's Manual........................................................................... 47
5 BIOS SETUP ................................................................................... 48
5.1 ENTER BIOS ............................................................................................. 48
5.2 THE MAIN MENU ...................................................................................... 49
STANDARD CMOS FEATURES ............................................................... 51
- 4 -
ADVANCED BIOS FEATURES ................................................................. 54
ADVANCED CHIPSET FEATURES .......................................................... 58
INTEGRATEDPERIPHERALS .................................................................. 61
POWERMANAGEMENT SETUP.............................................................. 67
PNP/PCICONFIGURATION....................................................................... 71
PCHEALTH STATUS ................................................................................ 73
FREQUENCY/VOLTAGECONTROL ......................................................... 74
LOAD FAIL-SAFE DEFAULTS .................................................................. 75
LOADOPTIMIZEDDEFAULTS ................................................................. 75
SETSUPERVISOR/ USER PASSWORD.................................................. 76
SAVE & EXIT SETUP................................................................................ 77
EXITWITHOUTSAVING ............................................................................ 77
- 5 -
Quick Reference
Hardware Installation >> Step-by-Step ................................................Page 12
Jumper Settings >> A Closer Look.......................................................Page 24
Drivers/Software Utilities >> How to Install .........................................Page 42
BIOS Setup >> How to Configure.........................................................Page 48
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
WHAT'S IN THE MANUAL
- 6 -
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle AB60/R mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle AB60/R mainboard. You will find
that installing your new Shuttle AB60/R mainboard is just easy. Bundled with
an array of onboard functions, the highly-integrated AB60/R mainboard pro-
vides you with a total solution to build the most stable and reliable system.
Refer to sections 3.2 Jumper Settings and Chapter 4 Drivers/Software
Utilities to find out how to get the best out of your new mainboard. Chapter 5
BIOS Setup also contains the relevant information on how to tune up your
system to achieve higher performance.
System Integrator
You have wisely chosen Shuttle AB60/R to construct your system. Shuttle
AB60/R incorporates all the state-of-the-art technology of the 865PE chipset
from Intel. It integrates the most advanced functions you can find to date in a
compact ATX board.
1INTRODUCTION
Inhaltsverzeichnis
Andere Shuttle Hauptplatine Handbücher
Shuttle
Shuttle Spacewalke AK21 Bedienungsanleitung
Shuttle
Shuttle Spacewalker HOT-685V Bedienungsanleitung
Shuttle
Shuttle FB83 Bedienungsanleitung
Shuttle
Shuttle HOT-675V Bedienungsanleitung
Shuttle
Shuttle HOT-649A Bedienungsanleitung
Shuttle
Shuttle SK41G Bedienungsanleitung
Shuttle
Shuttle FV24 Bedienungsanleitung
Shuttle
Shuttle DL30N Series Bedienungsanleitung
Shuttle
Shuttle Spacewalker MV18 Bedienungsanleitung
Shuttle
Shuttle FV25 Bedienungsanleitung
Shuttle
Shuttle HOT-591P Bedienungsanleitung
Shuttle
Shuttle FS56 Bedienungsanleitung
Shuttle
Shuttle AB60P Bedienungsanleitung
Shuttle
Shuttle Spacewalker AK31 Bedienungsanleitung
Shuttle
Shuttle AV14 Bedienungsanleitung
Shuttle
Shuttle FN85 Bedienungsanleitung
Shuttle
Shuttle MV43 Bedienungsanleitung
Shuttle
Shuttle HOT-675Z Bedienungsanleitung
Shuttle
Shuttle HOT-603 Bedienungsanleitung
Shuttle
Shuttle FS58 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
Commell
Commell MS-C73 Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
