Siding Tools Industries ProKUT6 Bedienungsanleitung

Trancheuse pour

revêtement mural

de 6

MANUEL D’UTILISATION

6" Wall siding shear

OWNER’S MANUAL

AVERTISSEMENT

Lire et comprendre toutes les directives. Le

non-respect des directives décrites ci-

dessous peut causer des blessures graves.

VEUILLEZ CONSERVER CES DIRECTIVES

POUR RÉFÉRENCE ULTÉRIEURE.

WARNING

Read and understand all

instructions. Failure to

follow all instructions

listed below may result in

serious bodily injury.

SAVE THESE

INSTRUCTIONS FOR

FUTURE REFERENCE.

PKT-6

SAFETY RULES FOR THE 6" WALL SIDING SHEAR

1. READ AND UNDERSTAND THIS INSTRUCTION MANUAL

BEFORE OPERATINGTHE6"WALL SIDING SHEAR.

2. The 6’’ Wall Siding Shear comes with a 1 year warranty. To activate

your warranty, we invite you to register on our website in the service

tab at : sidingtoolsindustries.com

If you are not thoroughly familiar with the operation of the 6" Wall

Siding Shear, obtainadvice fromaqualifiedworkerorcall450-

527-7840

Stay alert. Do not operate while under the influence of drugs,

alcohol, or medication.

Alwayswearsafetyapprovedeyeprotection with sideshields (ANSI

Z87.1)

Keepworkareaandfree of debris.

Keepchildren and unauthorized persons away from the 6" WallSiding

Shearand workarea.

Make sure tool is secure. Operate only on a firm substrate or solid stand.

Use the right tool. Do not force the 6" Wall Siding Shear or use it for a

job for which it was not designed; use only on approved materials.

10.

Keep blade sharp. A dull blade will not perform properly.

11.

Always keep hands away from blade while operating or carrying.

12.

Do not alter or misuse this tool. The 6" Wall Siding Shear is

precision built; modifications not specified in this manual may

result in a dangerous condition.

13.

Maintain the 6" Wall Siding Shear with care. Keep blade sharp

andclean.

14.

Useonlyrecommendedaccessories.Theuseofimproperaccessories

may causehazardsorinjury.

15.

Never leave the 6" Wall Siding Shear unattended. Secure the handle

with the safety lock when not in use.

WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS

INJURY! USING THIS MACHINE WITH RESPECT AND CAUTION WILL

CONSIDERABLY LESSEN THE POSSIBILITY OF PERSONAL INJURY.

-1-

SET UP

Installation of the Cutter

The ProKUT6 shear does not

require any assembly. It is

ready for use upon acquisition.

Warning:

Do not put your fingers

against the sharp edge of the

blade at any time.

-2-

CUTTING

Cutting Preparation

Secure the blade to lock the

mechanism. Lift the handle and

position the blade in the locked

position.

Warning:

Do not put your fingers

against the sharp edge of the

blade at any time.

Cutting Preparation

The mechanism is locked when the

pivot is raised upwards as shown in

the picture. To do this, raise the

handle to its highest and manipulate

the pivot manually.

Warning:

Do not put your

fingers against the sharp edge

of the blade at any time.

Cutting Preparation

Slide the profile into the

predefined block for the type of

profile to be cut. Put the blade in

the cutting position by raising the

handle very high to unlock the

mechanism, then down the handle

to cut.

Warning:

Do not put your

fingers against the sharp edge

of the blade at any time.

-3-

CUTTING

Cutting Preparation

Before cutting, reposition the pivot

downwards in the working

position. To do this, raise the

handle to its highest and

manipulate the pivot manually.

Warning:

Do not put your

fingers against the sharp edge

of the blade at any time.

-4-

MAINTENANCE

Maintenance:

For any service, it is recommended to

contact Siding Tools Industries at 450-

527-7840.

Warning:

Do not put your fingers

against the sharp edge of the

blade at any time.

It is recommended to lubricate

the blade on a regular period of

time with PL-100 or equivalent.

Do not use WD-40.

Transport:

Close the ProKUT6 shear well

before lifting by the handle or the

side handle. The weight of the

slice is about 20lbs.

Recommendation:

Make sure the handle of the

shear is completely closed before

lifting. For added security, you

can insert a 5/16 "diameter pin

into the hole in front of the shear

as shown in the picture.

-5-

OVERAL DIMENSION

-6-

PART LIST

-7-

PART LIST

No.

article

Part Name

Quantity

AUXILIARY HANDLE

FLANGED SLEEVE BEARING

PVC LOCKNUTS

THRUST BEARING 1/2'', THK 1/8''

FLAT WASHER 3/8''

SHOULDER SCREW 3/4''

SHOULDER SCREW 7/8''

EXTERNAL-TOOTH LOCK WASHER

THRUST BEARING 1/2'', THK 1/16''

SPLIT LOCK WASHER 1/2''

NYLON-INSERT THIN HEX LOCKNUT, 3/8"-16

LOCK NUTS 3/8''-16 UNC

HEX HEAD SCREWS PARTIALLY THREADED 3/8''-16 x 4''

LOCK NUTS 5/16''-18 UNC

HEX HEAD SCREWS PARTIALLY THREADED 5/16''-18 x 2''

HEX HEAD SCREWS PARTIALLY THREADED 5/16''-18 x 2

1/4''

HEX HEAD SCREWS PARTIALLY THREADED 5/16''-18 x 5/8''

-8-

PART LIST

No.

article

Part Name

Quantity

FLAT HEAD SCREWS 5/16''-18 x 2''

FLAT HEAD SCREWS 5/16''-18 x 1 3/4''

FLAT HEAD SCREWS 5/16''-18 x 1 1/4''

BLADE SUPPORT

PKT6-00012-01, REAR PIVOT

PKT6-00013-00, SUPPORT FOR COUNTER BLADE

PKT6-00001-00, RIGHT HAND BASE

BUSHING STRAIGHT REDUCING ADAPTERS WITH

HEX BODY

PKT6-00003-00, LEFT HAND BASE

PKT6-00004-01, HANDLE HOLDER

PKT6-00005-00, BASE

PKT6-00006-00, BRACE

PKT6-00007-00, HANDLE

PKT6-00008-00, LINK

BLADE

COUNTER BLADE

-9-

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Siding Tools Industries Cutter Handbücher

Siding Tools Industries

Siding Tools Industries UK-12 Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

Makita

Makita DCS552 Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

Husqvarna

Husqvarna Cut-n-Break K 760 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung