6
(1) Please watch out the operation while you’re manipulating the
machine. In case that there is any unusual phenomena, please
stop and repair immediately.
(3) Check whether the spindle is over-swing.
(4) Check whether each bolt and nut is loosen.
(5) Examine the overall circuit (contact points conductor, plugs and
switches) to ensure its normal condition.
3-1.3 Seasonal Maintenance
(1) Please perform the maintenance on each level and make record.
(2) Please stop the machine before replacing the part or maintenance
in order to avoid danger.
(3) Maintenance and repair showed be done regularity. If any
abnormal situation occurs, stop the machine and repair
immediately.
(4) If the abnormal situation is beyond the regular maintenance.
Please contact our service engineer nearest to you in order to
avoid further damage and safety.
3-2 Maintenance of Accessories
3-2.1 Maintenance of Cutter
(1) Use rag while install or unload the cutter to prevent the cutter
falling and cause the split of blade as well as hurt the figures.
(2) Keep the cutter in wooden or plastic box when you don’t need it. In
order to maintain the sharp blade, the cutter should be kept
respectively.
(3) Pay extra attention on cutter rotating direction. Wrong rotating
direction might cause sharpness and split blade and accelerate
the cutter exhaustion. If it is hard to identify the blade direction in
high speed revolving, please turn off the machine; during the
process, in decelerating speed, easier to it will be identify the
blade direction.
(4) Put the cutter and working piece (or chuck piece) in right places
before you turn on the machine. After turn on the machine, the
cutter will get close to the working piece and mill it.
(5) Sharpen the cutter as soon as it gets sharpness. Sharpness cutter
is not only hard to do the milling work but also easy to cause
damage on blade.
3-2.2 Attention Items For Accessories
(1) Please keep the taper shank clean .
(2)Please keep the taper shank and cutter in order and keep the
same cutter together. Next time when you use them, you will feel
