Siegenia MSA400 smart Bedienungsanleitung

WindoW hardWare

Door harDware

Sliding door hardware

Ventilation technology

Building technology

ORIGINAL OPERATING

INSTRUCTIONS

MSA400.

Motorised Sliding System.

Original operating instructions MSA400

03.2015 3

Contents

Correct use ...................................................................................................................................................................................... 4

Safety notices.................................................................................................................................................................................. 5

Description of device and functions ............................................................................................................................................... 6

Operating and display elements.................................................................................................................................................... 7

First operation.................................................................................................................................................................................. 8

Operation using operating push button.......................................................................................................................................10

Programming.................................................................................................................................................................................13

Reset the sash position ..................................................................................................................................................................15

Cleaning and maintenance ..........................................................................................................................................................16

Malfunctions..................................................................................................................................................................................16

Technical data...............................................................................................................................................................................16

Information concerning product liability ......................................................................................................................................17

MSA400 Original operating instructions

03.2015

Correct use

The MSA400 is an electric motor-driven system for opening and closing windows/French doors with sliding hardware

(sliding elements). It has a maximum displacement force of 50 N (res. 90 N on application of a light curtain) and a traverse

path of up to 8 m, and it may only be installed in elements which are compatible with these speciﬁcations.

• Scheme A

• Scheme E

max. 250 kg per sash

• Scheme G

• Scheme G2

• Scheme K

• Only operate and/or store the MSA400 system at temperatures between -5 °C and +50 °C.

• Operate the MSA400 only when it is in a technically sound condition. Do not modify the unit's components in any way.

• The MSA400 system may be operated only with hardware components and original accessories from SIEGENIA or with

hardware components and accessories from other manufacturers that have been expressly approved by SIEGENIA.

• In the event of a fault, have the MSA400 checked and repaired by qualiﬁed specialists only.

• When you operate the unit for the ﬁrst time, you must carry out a reference run as well as a calibration/teach-in run in

order to determine the element size and the displacement force.

Improper use

• The MSA400 system is not suitable for use in swimming pools and / or damp rooms. Special designs are possible and

permitted only upon request and after having been tested by SIEGENIA.

• Do not use the MSA400 system on emergency exit or panic exit doors.

• Sliding elements that are equipped with the MSA400 slide drive must not be used as escape doors in the event of a ﬁre.

• Do not put the MSA400 into operation when it is not installed, as this can cause mechanical defects.

• Any use or application of this product that is not in accordance with its proper use, or any adaptation of or modiﬁcation

to the product and its associated components, for which the express consent of SIEGENIA has not been obtained, are

strictly prohibited. SIEGENIA accepts no liability whatsoever for any material losses or injury to people caused by failure

to comply with this stipulation.

Original operating instructions MSA400

03.2015 5

Safety notices

Risk of injury or fatal injury. Hands, arms, legs and feet can get trapped and/or

crushed in systems driven by an electric motor.

› Keep body parts or objects away from areas where the sash slides or locks.

› This unit can be used by children aged 8 and above as well as by people with physical, sensory or mental diﬃculties or

with a lack of experience and knowledge as long as they are supervised or have been instructed in how to use the unit

safely and understand the resulting risks. Children must not play with the unit. Cleaning and user maintenance must not be

carried out by children without supervision.

Risk of injury or death due to electrical shock or ﬁre. Systems driven by an electric

motor can overheat and cause ﬁre.

› Insert the Euro mains plug of the standard connecting cable only into a suitable 230VAC socket.

› Only a qualiﬁed electrician may perform any work on the 230V AC mains power supply.

› Current local regulations (such as VDE 0100 of the VDE in Germany) must be observed.

› Relevant country-speciﬁc regulations must be strictly followed for all work on the voltage supply system or building wiring

system.

› All-pole safety isolation is required when the mains cable is laid on-site because the power supply does not have a

separate line disconnector.

› Connect in-wall supply lines to the MSA400 in branch boxes. These branch boxes must be kept accessible for

maintenance.

› When cleaning the sliding sash and the drives, make sure that no liquid gets inside the MSA400 system as this could

damage the electronics.

› Should a solid object or any liquid get inside the unit, stop operation immediately and disconnect the MSA400 from the

mains power supply. Then have the MSA400 checked and repaired by qualiﬁed specialists only.

› If the network connection cable is damaged, it may only be replaced by SIEGENIA, its customer service department or a

qualiﬁed electrician.

Injuries caused by falling objects.

› Please do not put or place objects on top of the MSA400.

MSA400 Original operating instructions

03.2015

Description of device and functions

The MSA400 system opens and locks the sliding element at the push of a button. The system can be operated using the

operating push button on the drive, the supplied infrared remote control or an optional wall switch. Two separate program-

ming buttons on the drive allow you to program the system.

Note: Optionally, the MSA400 system locks via a locking motor (not included in scope of delivery).

Functions

Function Description

Opening the sliding sash Unlocks and opens the sliding sash

Stop sliding sash during travel Stops the sliding sash during travel – both in the OPEN travel direction and

the CLOSE travel direction.

Opening sliding sash to intermediate

position

Opens the sliding sash to an intermediate position, which can be program-

med to any position.

Closing the sliding sash without locking Closes the sliding sash without locking it. This function can be used to prevent

inadvertently locking someone out, since the sliding sash can be opened

again by hand at any time.

Closing and locking sliding sash* Closes and locks* the sliding sash.

*only with additional locking motor

Safety cut-oﬀ

To prevent personal injury or damage to the unit, the MSA400 system is equipped with jam protection. If the traverse path of

the sliding sash is blocked, e.g. because of an obstacle or because it is held, the sliding sash stops, travels for approx. 4

seconds in the opposite direction and then comes to a ﬁnal stop.

Safety cut-oﬀ with optional light curtain

If the MSA400 system is equipped with an optional light curtain, the sliding sash is stopped immediately if an obstacle enters

the traverse path.

Original operating instructions MSA400

03.2015 7

Operating and display elements

Programming buttons and LED indicator

The Reset and Prog buttons are used to reset the sash position and to program the system.

LED indicator

The LED indicator shows the current status during programming or during operation of the system as follows:

LED indicator Meaning

Flashes red/green in alternation Error after system test or overheating

Flashes red Calibration and teach-in run

Continuously green Sliding sash is travelling to OPEN position

Continuously red Sliding sash is travelling to CLOSED position

Oﬀ Sliding sash is in intermediate position

Oﬀ Sliding sash is locked

Flashes red MSA400 system is not initialised – e.g. after a power failure

Operating push button

The operating push button is used to trigger functions (open, close, etc.) and is also used during programming.

Infrared remote control (optional)

The supplied infrared remote control is used for operating the system and can be used to control up to a max. of 5 groups

individually or simultaneously (programming required). A group can consist of multiple motorised sliding elements and/or

window elements. Each element in a group must be taught in to the group. Up to a max. of 8 remote controls can be taught in

on one MSA400 system so that the system can be operated by 8 diﬀerent infrared remote controls.

Wall button

Note: Wall buttons are not included in the standard scope of delivery. They are additional equipment that must be provided

by the customer.

If a wall button has been installed by the customer, the MSA400 system can also be operated using this wall button.

MSA400 Original operating instructions

03.2015

First operation

When operating the MSA400 system for the ﬁrst time, you must perform a reference run and then a calibration/teach-in run.

Perform reference run

1. The sliding sash must be in the CLOSED position in order to begin the reference run. If necessary, slide the sash to this

position manually.

2. Supply power to the .MSA400 system.

3. Press the operating push button. The reference run starts. During the reference run, the sash is unlocked and then locked

again.

4. Wait approx. 4 - 10 seconds until the sash is locked. The LED switches oﬀ once the reference run is complete.

1. 2. 3. 4.

4 - 10 Sek.

Note: A reference run must also be performed after a power failure in order to re-initialise the MSA400 again.

Original operating instructions MSA400

03.2015 9

Performing a calibration and teach-in run

The calibration and teach-in run only has to be performed when commissioning the equipment.

Risk of injury! Hands, arms, legs and feet can get trapped and/or crushed! There

is no safety cut-oﬀ function.

› During the entire calibration and teach-in run, maintain a safe distance from the moving elements.

Risk due to incorrect measured values!

› To prevent incorrect measured values, never interrupt or interfere with the calibration and teach-in run of the MSA400

system

1. Block sliding sash 2 (not applicable for scheme A).

2. The sliding sash must be in the CLOSED position in order to begin the calibration and teach-in run. If necessary, slide the

sash to this position manually.

3. Press the Prog button; the LED ﬂashes green.

4. Press and hold the operating push button for approx. 11 seconds until a short acoustic signal sounds 4 times in successi-

on.

5. Release the operating push button.

6. Press and hold the operating push button for approx. 2 seconds until a short acoustic signal sounds once.

7. Release the operating push button. The calibration and teach-in run starts. The LED ﬂashes red.

During the calibration and teach-in run, the sliding sash travels to the OPEN and CLOSED positions twice.

8. The element stops at sliding sash 2. Remove the blockage within approx. 5 seconds (not applicable for scheme A).

9. The LED switches oﬀ once the calibration and teach-in run is complete.

1. 3. 4.

11 sec.

BEEP

1 2 F

6. 7. 9.

2 x

BEEP

2 sec.

Once the calibration and teach-in run has been completed successfully, the MSA400 system is ready for normal operation.

MSA400 Original operating instructions

03.2015

Operation using operating push button

Opening the sliding sash

› When the sliding sash is closed and locked, press the operating push button once.

› The sliding sash is unlocked and opens; the LED lights up green.

1 x

Stopping sliding sash during travel – OPEN or CLOSE direction

› While the sliding sash is opening, press the operating push button once.

› The sliding sash stops.

1 x

Opening sliding sash to intermediate position

Note: The desired intermediate position must be programmed on the MSA400 system before carrying out this function –

see . “Teach in intermediate position” on 14.

› With the sliding sash closed, press and hold the operating push button for approx. 2 seconds until a short acoustic signal

sounds once.

› The sliding sash opens up to the intermediate position; the LED lights up green.

ca. 2 Sek.

BEEP

Inhaltsverzeichnis

Andere Siegenia Garagentoröffner Handbücher

Siegenia

Siegenia Drive Series Bedienungsanleitung

Beliebte Garagentoröffner Handbücher anderer Marken

Dorma

Dorma ES 90 Bedienungsanleitung

Garaga

Garaga SECURITY+ 3265GCM 1HP Bedienungsanleitung

Chamberlain

Chamberlain Whisper Drive SECURITY+ WD822K Series Bedienungsanleitung

Chase Doors

Chase Doors DuraShield Bedienungsanleitung

CSI

CSI Classic Bedienungsanleitung

HATO

HATO 120 Bedienungsanleitung

Chamberlain

Chamberlain Elite 3575S Bedienungsanleitung

Richmond

Richmond GTR156 Bedienungsanleitung

Raynor

Raynor 1280RGD Bedienungsanleitung

CAME

CAME F4000 Series Bedienungsanleitung

B&D

B&D Controll-A-Door 5 Bedienungsanleitung

BFT

BFT PRV AA SL Bedienungsanleitung

Craftsman

Craftsman 139.53924 Bedienungsanleitung

Chamberlain

Chamberlain MyQ 940ESTD Bedienungsanleitung

Automatic Technology

Automatic Technology GDO-9V1 SecuraLift Bedienungsanleitung

Westfalia

Westfalia 19 36 07 Bedienungsanleitung

Chamberlain

Chamberlain HD520EVP Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung