Siemens VersiCharge AC Bedienungsanleitung

CONFIGURATION TOOL USER MANUAL VERSION 1.1.4

VersiCharge™AC

Electric vehicle charging station

usa.siemens.com/versicharge

Index

. Introduction to VersiCharge Chargers 

. Register in VersiCloud 

. Commission the VersiCharge Chargers 

. Register the Charger 

. Connect the Charger 

. Configure the Charger in Wi-Fi Mode 

. Configure the Charger in Ethernet Mode 

. Configure the Charger in Cellular Mode 

– only available for parent units

. Enable or Disable RFID Authorization 

. Commission the Charger 

. Save Charger Configuration 

. Load Configuration 



VersiCharge™ AC Configuration Tool User Manual

Figures

Figure . Welcome Screen 

Figure . Supported Models 

Figure . Before You Begin 

Figure . Charger Registration Details 

Figure . Connect to VersiCharge Charger 

Figure . Refresh Endpoints 

Figure . Charger Connection Complete 

Figure . Connect to the Internet 

Figure . Choose Mode of Internet Connection 

Figure . Select Wi-Fi Network 

Figure . Manual Wi-Fi Network Configuration 

Figure . Configuration Sent to Device Successfully 

Figure . Select Ethernet Mode 

Figure . Ethernet Properties – Obtain DNS Server Address Automatically 

Figure . Ethernet Properties – Manual DNS Server Settings 

Figure . Hotspot and Tethering 

Figure . Select Cellular Mode 

Figure . Cellular Mode Configuration 

Figure . Share Internet from Sim Data 

Figure . Enable RFID Authorization 

Figure . Disable RFID Authorization 

Figure . Verifying the Commissioning 

Figure . Notification Screen 

Figure . Commissioning is Successful 

Figure . Configuration Cannot be Verified 

Figure . Configuration Sent Successfully 

Figure . Send Loaded Configuration 

Figure . Save Charger Configuration 

Figure . Create Password 

Figure . Choose Storage Location 

Figure . Configuration Saved Successfully 

Figure . Load Configuration 

Figure . Open Saved Configuration 

Figure . View Loaded Configuration 



User Manual VersiCharge™ AC Configuration Tool

1. Introduction to VersiCharge Chargers

NOTE: These instructions only apply to the version number listed on the title page.

VersiCharge charger models can be parent (advanced) or child (basic), based on features. VersiCharge

chargers use the VersiCharge Configurator application, a Windows application, for configuration and

connect over Wi-Fi, Ethernet or a mobile network to VersiCloud using a built-in Wi-Fi connection.

The following chargers are supported by the VersiCharge Configurator:

• All VersiCharge UL models except those with part numbers EMX-XXX-XXXX

• VersiCharge IEC models with part numbers EMX-XXXX-XXXX

To view the Configurator’s user manual and get help, click on the Help icon.

To install the conﬁguration tool, please refer to conﬁguration tool installation manual which can be found at

usa.siemens.com/versicharge and siemens.com/versicharge.

2. Register in VersiCloud

Before commissioning chargers, create an account in VersiCloud.

For all UL chargers, (except EMX-XXX-XXXX) register using the following link:

https://www.versichargesg.com/Account/Login?ReturnUrl=%f

For IEC chargers, (P/Ns EMX-XXXX-XXXX) register using the following link:

https://versicharge.emobility.siemens.cloud/Account/Register

The VersiCharge mobile app for iOS and Android can also be used to register a charger.

NOTE: VersiCloud provides visibility of all chargers connected to the same account and also provides an

option to remove/deregister any chargers.



VersiCharge™ AC Configuration Tool User Manual

3. Commission the VersiCharge Chargers

VersiCharge chargers can be commissioned over a network. Charger connection options are as follows:

• Wi-Fi

• Ethernet

• Cellular

Commission the VersiCharge charger by completing the following tasks:

• Register the Charger

• Connect to the Charger

• Commission the Charger

. Register the Charger

1. Open the VersiCharge Conﬁgurator application.

The Welcome screen appears:

Figure 1. Welcome Screen

Before commissioning, click model numbers to review the supported models.

Figure . Supported Models



User Manual VersiCharge™ AC Configuration Tool

2. Click Get Started.

The Before you begin screen appears:

Figure . Before You Begin

3. Choose how to conﬁgure the charger.

• Select I have an Internet connection, and the VersiCharge Conﬁgurator veriﬁes the conﬁguration in

VersiCloud after you complete the conﬁguration.

• Select I will configure offline, to manually verify the configuration in VersiCloud after the configuration is

complete. For more information on how to verify the configuration status manually, see 3.2 Connect the Charger.

4. Click Continue.

The Charger Registration Details screen appears:

Figure . Charger Registration Details

NOTE: You can click on the link to change the veriﬁcation method. When you select Verify Later, the commissioning

status must be manually veriﬁed as per the LED status shown on charger after you complete the conﬁguration.

5. Enter the registered Email ID.

The Email ID must be registered in VersiCloud before conﬁguring the charger (see 2 Register in VersiCloud).

6. Select the time zone of the charger from the drop-down list.



VersiCharge™ AC Configuration Tool User Manual

7. Click Next to continue the conﬁguration.

. Connect the Charger

The status of the charger can be monitored by the color of the LED notiﬁcations shown on the charger display.

The different LED notiﬁcation types are listed in the table below:

Description of Sequence LED Color

Power up Grey Blinking

Software loading Red Blinking

Software running Yellow Blinking

Charger in Access Point (AP) mode White Blinking

Receiving connection credentials White Blinking

Received connection credentials Green Blinking

Connecting to network Green Blinking

Connected to network Green Steady

Connecting to VersiCloud Blue Blinking

Connected to network, registered, and connected to VersiCloud White Steady

Before charger connection ensure the following:

• Ensure the Wi-Fi connection between the charger and the commissioning device is enabled and active at the

commissioning/conﬁguring device. For better stability, use 2.4GHz-type Wi-Fi network

• The Wi-Fi LED is blinking white on the charger (this indicates the charger is in Access Point (AP) mode).

• The Wi-Fi endpoint of the charger is available for connection. The serial number, found on the charger label, is a

connection choice.

NOTE: If Internet setup has been already conﬁgured in VersiCharge Conﬁgurator application with one of the modes,

conﬁguring it with any other mode will override the existing conﬁguration.

Perform the following steps to connect to the charger:

1. Register the charger.

For more information, see section 3.1 Register the Charger.

2. Connect to the Wi-Fi endpoint of the charger that will be used for conﬁguration/commissioning.

Figure 5. Connect to VersiCharge Charger



User Manual VersiCharge™ AC Configuration Tool

Click Refresh if the endpoint is not visible.

Figure 6. Refresh Endpoints

When the charger connection is successful, the Choose the mode of Internet Connection page appears along

with the serial number and catalog number of the charger:

Figure . Charger Connection Complete



VersiCharge™ AC Configuration Tool User Manual

3. In the Conﬁguration pane, click Internet Setup and select how to connect to the Internet, from the following options.

• Wi-Fi

• Ethernet

• Cellular

Figure . Connect to the Internet

. Configure the Charger in Wi-Fi Mode

Perform the following procedure to set up internet in Wi-Fi.

1. Register the charger.

For more information, see 3.1 Register the Charger.

2. Connect to the charger.

For more information, see 3.2 Connect to the Charger.

3. In the Conﬁguration pane, click Internet Setup and select Wi-Fi in the Choose the mode of

Internet Connection screen.

Figure 9. Choose Mode of Internet Connection



User Manual VersiCharge™ AC Configuration Tool

4. Click Refresh to refresh the list of Wi-Fi networks.

Select the Wi-Fi connection to connect to the internet.

Figure . Select Wi-Fi Network

5. Enter the password and click Save.

If the Wi-Fi is not listed, click Manual Conﬁguration to conﬁgure/commission the Wi-Fi.

Enter the SSID and hotspot password to manually conﬁgure/commission the Wi-Fi conﬁguration.

Figure . Manual Wi-Fi Network Configuration



VersiCharge™ AC Configuration Tool User Manual

Andere Handbücher für VersiCharge AC

Inhaltsverzeichnis

Andere Siemens Akkuladegerät Handbücher

Siemens

Siemens VersiCharge 8EM1310-F.0 Series Bedienungsanleitung

Siemens

Siemens VersiCharge AC Betriebsanleitung

Siemens

Siemens SICHARGE D Kurzanleitung

Siemens

Siemens eCharger Bedienungsanleitung

Siemens

Siemens VersiCharge Bedienungsanleitung

Siemens

Siemens VersiCharge Ultra 175 Bedienungsanleitung

Siemens

Siemens VersiCharge AC 8EM1312-4AF10-0AA3 Bedienungsanleitung

Siemens

Siemens SICHARGE UC 100 Bedienungsanleitung

Siemens

Siemens 5TT3 201 Series Bedienungsanleitung

Siemens

Siemens eCharger Bedienungsanleitung

Siemens

Siemens SICHARGE CC AC22-MID Bedienungsanleitung

Siemens

Siemens eCharger Bedienungsanleitung

Siemens

Siemens eCharger Bedienungsanleitung

Siemens

Siemens SICHARGE Bedienungsanleitung

Siemens

Siemens SICHARGE D ERK Bedienungsanleitung

Siemens

Siemens SICHARGE 8EM4110 Series Bedienungsanleitung

Siemens

Siemens VersiCharge 8EM1310 Series Bedienungsanleitung

Siemens

Siemens 8EM1310-2EN04-0GA0 Administratorhandbuch

Siemens

Siemens SICHARGE D Kurzanleitung

Siemens

Siemens VersiCharge SG Bedienungsanleitung

Siemens

Siemens VersiCharge Bedienungsanleitung

Siemens

Siemens VersiCharge SG Bedienungsanleitung

Siemens

Siemens VersiCharge AC Series Bedienungsanleitung

Siemens

Siemens SICHARGE UC 150 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung