Siemens SL65 Einrichtungshandbuch

Company Confidential

Page 1of 10

Service Repair Documentation

Level 2.5 - SL65

Service Repair Documentation

Level 2.5 - SL65

Release Date Department Notes to change

1.0 04.08.2004 ICM MP CCQ GRM T New document

Company Confidential

Page 2of 10

Service Repair Documentation

Level 2.5 - SL65

Introduction

This Service Repair Documentation is intended to carry out repairs on Siemens repair level

2.5. The described failures shall be repaired in Siemens authorized local workshops only.

All repairs have to be carried out in an ESD protected environment and with ESD protected

equipment/tools. For all activities the international ESD regulations have to be considered.

Assembling/disassembling has to be done according to the latest SL65 Level 2 repair

documentation. It has to be ensured that every repaired mobile Phone is checked according

to the latest released General Test Instruction document (both documents are available in

the Technical Support section of the C-market).

Check at least weekly C-market for updates and consider all SL65 related Customer Care

Information

SL65 Partnumber on IMEI label: S30880-S7700-#xxx

, while # may be any letter (A-Z) and xxx may be any number from 100, 101, 102....

If you have any questions regarding the repair procedures or technical questions spare not

hesitate to contact our technical support team in Kamp-Lintfort, Germany:

Tel.: +49 2842 95 4666

Fax: +49 2842 95 4302

e-mail: [email protected]

Company Confidential

Page 3of 10

Service Repair Documentation

Level 2.5 - SL65

Table of Content

1SL65 board layout .........................................................................................................................4

2Connector SIM Card Reader .........................................................................................................5

3Connector IO Jack.........................................................................................................................6

4Connector Battery .........................................................................................................................7

5Connector BOARD TO BOARD ....................................................................................................8

6Connector RF Internal Antenna.....................................................................................................9

7Connector Camera ......................................................................................................................10

Company Confidential

Page 4of 10

Service Repair Documentation

Level 2.5 - SL65

1 SL65 board layout

Jigs, Tools and Working materials for all described repairs:

-hot air blower

-soldering gun

-tweezers

-flux

-solder

Connector

BOARD TO BOARD

Connector

CAMERA

Connector

RF Connector

IO JACK

Connector

BATTERY

Connector

SIM CARD READER

Company Confidential

Page 5of 10

Service Repair Documentation

Level 2.5 - SL65

2 Connector SIM Card Reader

Fault Symptoms

Customer: GRT:

Handset does not accept SIM card SIM Card Problems

SIM Card Problems

Watch for oxidation and

damaged pads of the SIM

card reader

SCRAP don´t

send back to WSC

not okay

okay

Check the status of the

SIM card reader visually

okay

not okay - check for twisted or

bended contacts

- check for dry joints

Level 2 Repair

Exchange

SIM Card reader

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

not okay okay

Connector SIM Card Reader

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C335

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 43300 Interface/SIM Cardreader/Mechanical Damage

Company Confidential

Page 6of 10

Service Repair Documentation

Level 2.5 - SL65

3 Connector IO Jack

Fault Symptoms

Customer: GRT:

Charging Problems No connection to GRT

Problems with external loudspeaker or microphone when using a car kit Tbd.

Problems with accessories connected at the IO connector

IO connector Problems

Watch for oxidation and

damaged pads of the

IO connector

SCRAP don´t

send back to WSC

okay

Clean

IO connector

Check for dust inside

the IO connector

okay

not okay

Exchange

IO connector

Check the status of the

IO connector visually

okay

not okay

Level 2 Repair

- check for twisted or

bended contacts

- check for dry joints

okay

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

not okay

Connector IO Jack

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z93-C303

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 46100 Interface/Charging Connector/Mechanical Damage

47300 Interface/Data Interface/Mechanical Damage

4B100 Interface/Headset Connector/Mechanical Damage

Company Confidential

Page 7of 10

Service Repair Documentation

Level 2.5 - SL65

4 Connector Battery

Fault Symptoms

Customer: GRT:

Mobile does not switch on No connection to GRT

Battery connector

Problems

Check the status of the

battery connector visually

okay

not okay

Level 2 Repair

Exchange

Battery connector

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

Watch for oxidation and

damaged pads of the battery

connector

not okay okay

okay

SCRAP don´t

send back to WSC

not okay

Connector BATTERY

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36334-Z97-C213

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 13000 Battery/Mechanical Damage

Company Confidential

Page 8of 10

Service Repair Documentation

Level 2.5 - SL65

5 Connector BOARD TO BOARD

Fault Symptoms

Customer: GRT:

Display problems, like missing lines or columns on the LCD

or display contrast problems or illumination problems

Display problems

No infrared connection possible Tbd.

Joystick malfunction Tbd.

BOARD TO BOARD

Connector Problems

Check the status of the

connector visually

okay

not okay

Level 2 Repair

Exchange

Board to Board

Connector

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

Watch for oxidation and

damaged pads of the

connector

not okay okay

okay

SCRAP don´t

send back to WSC

not okay

Connector BOARD TO BOARD

Use soldering iron to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36 334-Z97-C340

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: 21000 Display / Performance

22000 Display / Background Illumination

41100 Interfaces / IRDA / No Function

41300 Interfaces / IRDA / Mechanical Damage

32100 Keys / Main / No Function

32200 Keys / Main / Reduced Functionality

Company Confidential

Page 9of 10

Service Repair Documentation

Level 2.5 - SL65

6 Connector RF Internal Antenna

Fault Symptoms

Customer: GRT:

Network search Failure by TX/RX measurements

No location update possible No location update possible

RF connector

Problems

Check the status of the

RF connector visually

okay

not okay

Level 2 Repair

Exchange

Battery connector

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between input and

output contacts. The

value must be ~0Ω

Watch for oxidation and

damaged pads of the RF

connector

not okay okay

SCRAP don´t

send back to WSC

not okay

Clean

RF connector

Check for dust inside

the RF connector

not okay

okay

Connector RF

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36197-F5020-F650

Soldering temperature: 240 - 255°C

IRIS Diagnose Code:

81100 Radio / No Contact / Int. Antenna 81200 Radio / No Contact / Ext. Antenna

82100 Radio / Low Receiving Signal / Int. Antenna 82200 Radio / Low Receiving Signal / Ext. Antenna

83100 Radio / Dropped Calls / Int. Antenna 83200 Radio / Dropped Calls / Ext. Antenna

84100 Radio / Call Setup / Int. Antenna 84200 Radio / Call Setup / Ext. Antenna

Company Confidential

Page 10 of 10

Service Repair Documentation

Level 2.5 - SL65

7 Connector Camera

Fault Symptoms

Customer: GRT:

Camera malfunction Tbd.

Camera connector

Problems

Check the status of the

camera connector visually

okay

not okay

Level 2 Repair

Exchange

Camera connector

- check for twisted or

bended contacts

- check for dry joints

Use the resistor test

function of a multimeter

to check connection

between spring

contacts and soldering

contacts. The value

must be ~0Ω

Watch for oxidation and

damaged pads of the

camera connector

not okay okay

okay

not okay SCRAP don´t

send back to WSC

Connector CAMERA

Use hot air blower to remove defective component. Avoid excessive heat! Watch surrounding components!

Resolder new component afterwards.

E-commerce order number: L36197-F5008-F341

Soldering temperature: 240 - 255°C

IRIS Diagnose Code: BA000 Accessories / Camera

Andere Handbücher für SL65

Inhaltsverzeichnis

Andere Siemens Handy Handbücher

Siemens

Siemens ME75 Bedienungsanleitung

Siemens

Siemens C55 Bedienungsanleitung

Siemens

Siemens A70 Bedienungsanleitung

Siemens

Siemens CL50 Bedienungsanleitung

Siemens

Siemens ST55 Bedienungsanleitung

Siemens

Siemens Gigaset SL75 WLAN Bedienungsanleitung

Siemens

Siemens CF75 Einrichtungshandbuch

Siemens

Siemens C60 Bedienungsanleitung

Siemens

Siemens S11 Bedienungsanleitung

Siemens

Siemens AF51 Bedienungsanleitung

Siemens

Siemens M50 Bedienungsanleitung

Siemens

Siemens C35 series Bedienungsanleitung

Siemens

Siemens C75 Bedienungsanleitung

Siemens

Siemens A65 Bedienungsanleitung

Siemens

Siemens Gigaset S56 Bedienungsanleitung

Siemens

Siemens SF65 Bedienungsanleitung

Siemens

Siemens CX70 Bedienungsanleitung

Siemens

Siemens C30 Bedienungsanleitung

Siemens

Siemens M65 Bedienungsanleitung

Siemens

Siemens E10 Bedienerhandbuch

Siemens

Siemens Gigaset SL56 Bedienungsanleitung

Siemens

Siemens Emoty Bedienungsanleitung

Siemens

Siemens A56 Bedienungsanleitung

Siemens

Siemens CL75 Bedienungsanleitung

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung