Siemens 8DJH Handbuch

SIEMENS 8DJH Ring Main Operator Guide Circuit Breaker Panel

(Type 2)

OPEN

2756

OPEN

2756

OPEN

2756

WARNING

Check that the Ready For Service (gas) Gauge indicates GREEN before operation

DO NOT OPERATE switchgear if the pointer is in the RED region

Slide the Isolator/Earth Switch Control Gate down to

open the Earth Shutter. 2

Insert the Operating Lever and rotate anti-clockwise

to open the Earth Switch. 3

Remove the Operating Lever. Check the

Control Gate has returned to the mid position.

AFeeder Earthed u

Feeder Isolated u

Slide the right-hand Control Gate up to open the

Isolator Shutter.

(a) Remove the Operating Lever. Check the

Control Gate has returned to the mid position.

(b) Slide the left-hand Control Gate up to open the

Circuit Breaker Spring Charge Shutter.

Insert the Operating Lever and rotate clockwise

to close the Isolator Switch.

Insert the Operating Lever and rotate clockwise to

charge the Circuit Breaker Spring. It will click and hold

when rotated enough (70°).

Note: The aperture is sprung to eject the handle automatically.

It must be pushed in ﬁrmly and held to rotate.

For panels where the Circuit Breaker Spring Charge

mechanism is motorised, the spring is automatically

recharged immediately after the Circuit Breaker is

opened. In this case, steps 4 and 5 can be omitted.

6Remove the Operating Lever. Press the CLOSE

button VERY HARD.

BFeeder Isolated u

Feeder Connected u

These instructions detail mechanical operation of standard designs only

SIEMENS 8DJH Ring Main Operator Guide Circuit Breaker L Panel (Type 2)

SWITCHGEAR Division

OPEN

2756

OPEN

2756

OPEN

2756

Circuit Breaker CLOSE

push button

Circuit Breaker OPEN

push button

Earth Switch status indication (shown open)

Isolator Status indicator (shown open)

Circuit Breaker

Spring Charge

indicator

Circuit Breaker status

indication (shown open)

Isolator/Earth Switch Control Gate

Earth Switch Shutter

Isolator Switch Shutter

Circuit Breaker Spring

Charge Shutter

(clockwise to charge spring)

Circuit Breaker Spring Charge control gate

1Press the OPEN button VERY HARD.

Slide the Isolator/Earth Switch Control Gate down to

open the Earth Shutter.

Slide the right-hand Control Gate up to open the

Isolator Shutter.

Insert the Operating Lever and rotate clockwise to

close the Earth Switch.

Insert the Operating Lever and rotate anti-clockwise to

open the Isolator Switch.

Remove the Operating Lever. Check the

Control Gate has returned to the mid position.

CFeeder Connected u

Feeder Isolated u

DFeeder Isolated u

Feeder Earthed u

SG-L2 GUIDE-001 7/2/2019These instructions detail mechanical operation of standard designs only. This is a guide only, refer to manufacturers instructions for further important information.

Andere Handbücher für 8DJH

Andere Siemens Schutzschalter Handbücher

Siemens

Siemens JG Bedienungsanleitung

Siemens

Siemens 3VT9300-8CE30 Bedienungsanleitung

Siemens

Siemens 3VL9600 - 4W 0 Series Bedienungsanleitung

Siemens

Siemens I-T-E Sensitrip MD Series Betriebsanleitung

Siemens

Siemens DCAMRC Bedienungsanleitung

Siemens

Siemens 3WN1 Bedienungsanleitung

Siemens

Siemens PL 50 Bedienungsanleitung

Siemens

Siemens SIRIUS H3RV2711 Bedienungsanleitung

Siemens

Siemens RS4755 Bedienungsanleitung

Siemens

Siemens 3VA9601-0WF30 Bedienungsanleitung

Siemens

Siemens 3VA11-E Series Bedienungsanleitung

Siemens

Siemens 3WN6 Bedienungsanleitung

Siemens

Siemens 3WN1 Bedienungsanleitung

Siemens

Siemens UVR Bedienungsanleitung

Siemens

Siemens 3VA20 JP Series Bedienungsanleitung

Siemens

Siemens 3WX3653-1J 00 Series Bedienungsanleitung

Siemens

Siemens PD6 Betriebsanleitung

Siemens

Siemens 3WN6 Bedienungsanleitung

Siemens

Siemens 3VT9215-4TD30 Bedienungsanleitung

Siemens

Siemens 3WX3623 Series Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA1.5 Bedienungsanleitung

Siemens

Siemens 3VA9978-0AB1 Series Bedienungsanleitung

Siemens

Siemens UL 1066 Bedienungsanleitung

Siemens

Siemens 3VF Series Gebrauchs- und Pflegehandbuch

Beliebte Schutzschalter Handbücher anderer Marken

ABB

ABB SACE Emax 2 E2.2 Bedienungsanleitung

Eaton

Eaton NOVA LBS 15 Bedienungsanleitung

Gewiss

Gewiss 90 RCD Bedienungsanleitung

ABB

ABB SACE Emax E1 Bedienungsanleitung

WEG

WEG FHU ACW125 Bedienungsanleitung

hager

hager TS 303 Montageanleitung

ETI

ETI EFI-4B Bedienungsanleitung

nader

nader NDM3EU-225 Bedienungsanleitung

TERASAKI

TERASAKI NHP TemBreak PRO P160 Series Bedienungsanleitung

Gladiator

Gladiator GCB150 Bedienungsanleitung

Eaton

Eaton 50DHP-VR Handbuch

ABB

ABB SACE Emax 2 E6.2 Handbuch

OEZ

OEZ LFN Bedienungsanleitung

Eaton

Eaton Power Defense PDG2 Handbuch

Bticino

Bticino L4412CM2 Bedienungsanleitung

Eaton

Eaton S-T0 Handbuch

OEZ

OEZ 3VA9-RS-4VBH1 Handbuch

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-G Bedienungsanleitung