Siemens TC35i Terminal Bedienungsanleitung

TC35i

Siemens Cellular Engine

Migration Guideline TC35 -> TC35i

Version: 01.01

DocID: TC35_TC35i_01_V01.01

This Technical information can be found on https://www.jotrin.com

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 2of 829.01.2003

Document Name: Migration Guideline TC35 -> TC35i

Version: 01.01

Date: January 29, 2003

DocId: TC35_TC35i_01_V01.01

Status: Preliminary

General notes

Product is deemed accepted by Recipient and is provided without interface to Recipient´s products. The

Product constitutes pre-release version and code and may be changed substantially before commercial

release. The Product is provided on an “as is” basis only and may contain deficiencies or inadequacies.

The Product is provided without warranty of any kind, express or implied. To the maximum extent

permitted by applicable law, Siemens further disclaims all warranties, including without limitation any

implied warranties of merchantability, fitness for a particular purpose and noninfringement of third-party

rights. The entire risk arising out of the use or performance of the Product and documentation remains

with Recipient. This Product is not intended for use in life support appliances, devices or systems where

a malfunction of the product can reasonably be expected to result in personal injury. Applications

incorporating the described product must be designed to be in accordance with the technical

specifications provided in these guidelines. Failure to comply with any of the required procedures can

result in malfunctions or serious discrepancies in results. Furthermore, all safety instructions regarding

the use of mobile technical systems, including GSM products, which also apply to cellular phones must

be followed. Siemens AG customers using or selling this product for use in any applications do so at

their own risk and agree to fully indemnify Siemens for any damages resulting from illegal use or resale

.To the maximum extent permitted by applicable law, in no event shall Siemens or its suppliers be liable

for any consequential, incidental, direct, indirect, punitive or other damages whatsoever (including,

without limitation, damages for loss of business profits, business interruption, loss of business

information or data, or other pecuniary loss) arising out the use of or inability to use the Product, even if

Siemens has been advised of the possibility of such damages. Subject to change without notice at any

time.

Copying of this document and giving it to others and the use or communication of the contents thereof,

are forbidden without express authority. Offenders are liable to the payment of damages. All rights

reserved in the event of grant of a patent or the registration of a utility model or design.

Trademark notice

MS Windowsis a registered trademark of Microsoft Corporation.

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 3of 829.01.2003

1Product Features

1.1 Feature Highlights

•Features based on TC35 and in addition new or improved functions

•Largely HW- and SW compatible

•Same mounting concept

•Same size as TC35

•Same required peripherals

•PCB: single sided

•PCB: super slim

•GSC-antenna connector

•ZIF connector 40pin

•Extended AT commands for industry

•SIM Applikation Toolkit

•7E1

•Dual band 900/1800 MHz

•GSM only

Significant difference:

The input voltage range has changed by the upper voltage limit:

•TC35: 3,3 V – 5,5 V

•TC35i: 3,3 V – 4,8 V

We recommend a operating voltage of 4,2 V.

Note:

New measurements (EMC, ...) have to be done for a migration TC35 / TC35i.

Furthermore the approval of the application has to be updated.

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 4of 829.01.2003

1.2 Feature Overview

Common Features of TC35 and TC35i

General •Dual-band EGSM900 and GSM1800

•Compliant to GSM phase 2/2+

•Output power:

-Class 4 (2W) at EGSM900

-Class 1 (1W) at GSM1800

•Ambient Temperature: - 20 ... + 55 °C

•Multiplex RS232 interface

•Controll via AT commands (*)

(*) For a detailed description of the AT command set refer to the document

„Migration Concept TC35 / TC35i“

SMS •Point-to-point MO and MT

•SMS cell broadcast

•Text and PDU mode

Fax •Group 3, class 2

Data •CSD up to 14.4 kbps

•USSD

•V.110

•Non transparent mode

Audio •Half rate (HR), full rate (FR), enhanced full rate (EFR)

•Basic handsfree operation: Echo cancellation, noise reduction

Approval •R&TTE with reference equipment

•GCF approval

Antenna connector 50 Ohm GSC connector

Interface 40 pin ZIF Connector for:

•Power supply

•SIM 3 V

•RS232 bi-directional

•Autobauding

•Analog audio

Tools •Developement Support Box DSB35

•Boot Box BB35

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 5of 829.01.2003

1.3 Differences TC35 / TC35i

TC35 TC35i

7E1 – character framing no yes

Dimensions 54 x 36 x 6,7 mm354 x 36 x 3,6 mm3

PCB two-sided single-sided

Thickness of PCB 1,25 mm 0,85 mm

Voltage Supply 3,3 – 5,5 V 3,3 - 4,8 V

Current consumption

(typical)

•Talk mode: 300 mA

•Idle mode: 10 mA

•Sleep mode: 3,0 mA

•Power down mode: 50µA

•Talk mode: 300 mA

•Idle mode: 25 mA

•Sleep mode: 3,0 mA

•Power down mode: 50µA

SIM Application Toolkit no yes

Support of charging

accumulator yes yes

PCB solder pads no 3 contacts for connection of a battery

pack

(VBATT+, ACCU_TEMP, GND)

Weight 18g 10g

Packaging 90 units per packaging 100 units per packaging

Palette 5670 units per palette 6300 units per palette

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 6of 829.01.2003

2Outline Drawings

TC35

TC35i

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 7of 829.01.2003

3New AT Commands

The AT Cellular command structure for TC35i corresponds to that of TC35. Differences are

listed for each command.

AT-Command /

Feature Description

AT&W exp. Store current configuration to user defined profile

AT&W is expanded with:

•AT^STPB

•AT+ICF Set TE-TA control character framing

•AT+IFC Set TE-TA local data flow control

•AT\Qn flow control

•AT%D Set circuit Data Terminal Ready (DTR) function mode

AT%D new Automatic dialing phone number in memory ME index 1 with DTR

AT\Vn new the output of the announcement \RLP in CONNECT will be suppressed.

AT^SSET new Information on SIM read, status and break generation for Fax.

•Information when the SIM reading has been completed after startup of

the unit or SIM exchange.

AT+CIND

AT+CMER

new Indicator control

Mobile equipment event reporting

•BER +RSSI (AC43/45)

AT+CLIR new Calling line identification restriction

•Realisation by AT command and additional by *# sequence

AT+CMGL

AT+CMGR exp.

exp. List SMS messages from preferred store

Read SMS message

•Output of SMS-Status-Reports in PDU Mode without fillbits (FFs)

AT+CMMS new Leave the data channel open for following messages

AT+CPMS exp. Preferred SMS mesage storage

AT+CRSM exp. Restricted SIM access

•Prefered language

•SCID (Display SIM card identification number) before PIN 1

AT+CSMS

AT+CNMI exp.

exp. Select message service

New SMS mesage indications

Output of SMS directly to TE without confirmation with AT+CNMA.

AT+ICF exp. Set TE-TA control character framing

Migration Guideline TC35 -> TC35i

P R E L I M I N A R Y

TC35_TC35i_01_V01.01Page 8of 829.01.2003

AT+IFC exp. Set TE-TA local data flow control

AT+VTS exp. DTMF and tone generation

•Transmission of DTMF tones without PIN 1 protection

ATS0 exp. Set number of ringes before automatically answering the call

•Automatically answering voice calls

AT^SNFW exp. Select audio hardware set

•Saving the audiomode (AT^SNFS)

AT+CNMI

AT+CSMS new AT+CNMI is independent from AT+CSMS command

exp. = expanded or improved feature

new = new feature

Andere Handbücher für TC35i Terminal

Inhaltsverzeichnis

Andere Siemens Computerhardware Handbücher

Siemens

Siemens SIMATIC NET CP 5614 A2 Bedienungsanleitung

Siemens

Siemens System 600 APOGEE Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 243-1 IT Bedienungsanleitung

Siemens

Siemens Metro 21 M216KA Bedienungsanleitung

Siemens

Siemens XMS-SP Bedienungsanleitung

Siemens

Siemens PAD-5 Series Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 5512 Bedienungsanleitung

Siemens

Siemens Fujitsu D1159 Bedienungsanleitung

Siemens

Siemens 928B Benutzerhandbuch

Siemens

Siemens SIMATIC NET CP 5622 Bedienungsanleitung

Siemens

Siemens SMN42 Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 1411 Bedienungsanleitung

Siemens

Siemens SIMATIC NET 6GK7 443-5FX02-0XE0 Bedienungsanleitung

Siemens

Siemens SPCN910 Bedienungsanleitung

Siemens

Siemens SIMATIC CP 541 Bedienungsanleitung

Siemens

Siemens Open Processor Bedienungsanleitung

Siemens

Siemens SIMATIC 317TF-2 DP Bedienungsanleitung

Siemens

Siemens SIMOTION TB30 Bedienungsanleitung

Siemens

Siemens CP 5613 A3 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-1200 CP 1243-8 IRC Bedienungsanleitung

Siemens

Siemens SIMATIC S7-1200 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-400 CP 440 Bedienungsanleitung

Siemens

Siemens EB1 Bedienungsanleitung

Siemens

Siemens Metro 21 M216KASPC Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung