Siemens RHFL Bedienungsanleitung

1 / 4

Through Door Mounted Rotary Handle Operator Kit

Juego de operador Giratorio Montado a Través de la Puerta.

Par la Porte kit RotatoireMonté d‘Opérateur de Poignée.

For Use With Frame JG, LG

Para Usar Con Caja Base JG, LG

Installation Instructions / Instructivo de Instalación

Use only with Siemens certified Components.

Utilizar únicamente con componentes certificados de Siemens.

A utiliser uniquement avec les composants certifiés Siemens.

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

I.L. No. 806828A01

U.S. Cat. No. Euro Order No.

Item: RHFL 3VL9400-3JA01

RHFLEM 3VL9400-3JB01

7/16”

Ø.28”

[ 7.1 mm ]

Ø .38“

[ Ø 9.5 ]

RHFL / 3VL9400-3JA01

RHFLEM / 3VL9400-3JB01

- 2 X 1/4– 20 X 1/2”

- 3 X 6-32 X .25”

- 2 X M4 X 12mm

- 2 X 1/4 -20

- 2 X 1/4 – 20

-2XNo.8

NEMA Type 1 and 12

[ NEMA Tipo 1 y 12 ]

806828A01

NOTE - These instructions do not purport to cover

all details or variations in equipment, or to provide

for every possible contingency to be met in

connection with installation, operation or maintenance.

Should further information be desired or

should particular problems arise, which are not

covered sufficiently for the purchaser’s purposes,

the matter should be referred to the local Siemens

sales office. The contents of this instruction

manual shall not become part of or modify any

prior or existing agreement, commitment or

relationship. The sales contract contains the entire

obligation of Siemens. The warranty contained in

the contract between the parties is the sole

warranty of Siemens. Any statements contained

herein do not create new warranties or modify the

existing warranty.

Trademarks - Unless otherwise noted, all names

identified by ® are registered trademarks of

Siemens AG or Siemens Industry, Inc.

The remaining trademarks in this publication may

be trademarks whose use by third parties for their

own purposes could violate the rights of the owner.

2 X 35 lb.in.

[ 4 Nm ]

- 2 X 1/4 – 20

7/16”

2/4

2 X 35 lb.in.

[ 4 Nm ]

2 X 1/4 – 20 X 1/2”

2 X 1/4 -20 -

2 X 18 lb. in.

[ 2 Nm ]

- 2 X M4 x 12mm

2 X No. 8 -

Trip

[ Interrumpir ]

Test:

[ Prueba: ]

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

Turn off and lock out all powersupplying this device before

working on this device.

Replace allcovers before powersupplying this device is

turned on.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoirsoit alimenté.

Tensión peligrosa.

Puedecausar la muerte o lesiones graves. Tension dangereuse.

Danger de mort ou risque de blessures graves.

Hazardous Voltage

Will cause death orserious injury

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

3/4

3 X 6-32 X .25”

11 lb.in.

[ 1 Nm ]

D > 3.94” + ( P X .20” )

[ D > 100 mm + ( P X 5mm ) ]

P < 2.0” [ P < 51mm ]

Reset

[ Restablecer ]

ON / I

clac

Trip OK

[ Interrumpir ]

For Support in Europe refer to :

Bestell-Nr. / Order No.: 3ZX1012-0VL68-1AA9 Internet: www.siemens.de/lowvoltage/technical-assistance GWA 4NEB 179 6828-10 DS 02

Option:

[ Opción: ]

1 - 3 / Ø.20” - .32”

[1-3 / Ø5-8mm] 3

Subject to change without prior notice © Siemens Industry Inc. 2010

Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.

Technical Support: Toll Free: 1-800-241-4453 Internet: www.usa.siemens.com/powerdistribution

4 / 4 806828A01

5.31 [135.0]

.35 [9.0]

.87 [22]

.52 [13]

1.74 [44]

2.96 [75]

90°

ON / I

OFF / O

9.75 [ 247.5 mm ]

5.31 [ 135mm ]

.87 [ 22 mm ] ( 3P & 4P )

4 X Ø.28 [ 7.1 mm ]

or [ o ]

threaded hole 1/4-20

[ rosca de tornillo

1/4-20 ]

.87 [ 22 mm ] ( 3P )

2.61 [ 66 mm ] ( 4P )

Dieses Handbuch passt für folgende Modelle

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens SINUMERIK 808D Kurzanleitung

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens SINUMERIK 828D Turning Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens LOGO! Series Bedienungsanleitung

Siemens

Siemens SIMATIC FM 351 Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Bedienungsanleitung

Siemens

Siemens 3RK1408-8K.00-0AA2 Bedienungsanleitung

Siemens

Siemens SIMATIC S5 1P 243 Technisches Dokument

Siemens

Siemens HZM Bedienungsanleitung

Siemens

Siemens SINAMICS Startdrive Bedienungsanleitung

Siemens

Siemens SINUMERIK 840DE SL Stücklistenhandbuch

Siemens

Siemens NCU 7x0.3 PN Series Bedienungsanleitung

Siemens

Siemens IONPURE VNX50HH-2 Handbuch

Siemens

Siemens WFZ56 Series Installations- und Betriebshandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA2711-0DB00 Bedienungsanleitung

Siemens

Siemens QPA228.FWNC Series Bedienungsanleitung

Siemens

Siemens SIMATIC IM151-1 STANDARD Bedienungsanleitung

Siemens

Siemens AZL2 Series Bedienungsanleitung

Siemens

Siemens LAL Series Bedienungsanleitung

Siemens

Siemens SINAMICS G130 Bedienungsanleitung

Siemens

Siemens ASR61EX Bedienungsanleitung

Siemens

Siemens SINAMICS G130 TM150 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung