Siemens SIMATIC NET CP 1613 A2 Bedienungsanleitung

CP 1613 A2

___________________

SIMATIC NET

PG/PC - Industrial Ethernet

CP 1613 A2

Operating Instructions

08/2016

C79000

-G8976-C303-02

Preface

Description of the device

Software installation

Hardware installation

Configuration

Technical specifications

Approvals

Siemens AG

Division Process Industries and Drives

Postfa

ch 48 48

90026 NÜRNBERG

GERMANY

Document order number: C79000-G8976-C303

Ⓟ

09/2016 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

CP 1613 A2

Operating Instructions, 08/2016, C79000-G8976-C303-02 3

Table of contents

1 Preface ................................................................................................................................................... 5

2 Description of the device......................................................................................................................... 9

3 Software installation.............................................................................................................................. 11

3.1 Installing the driver..................................................................................................................11

3.2 Installing the "SIMATIC NET PC Software" ............................................................................11

3.3 Uninstalling the "SIMATIC NET PC Software"........................................................................12

4 Hardware installation............................................................................................................................. 13

5 Configuration ........................................................................................................................................ 15

6 Technical specifications ........................................................................................................................ 17

A Approvals.............................................................................................................................................. 19

Table of contents

CP 1613 A2

4Operating Instructions, 08/2016, C79000-G8976-C303-02

CP 1613 A2

Operating Instructions, 08/2016, C79000-G8976-C303-02 5

Preface

Validity of this documentation

These operating instructions are valid for the following product:

●CP 1613 A2

Article number: 6GK1161-3AA01

Content of this documentation

These operating instructions contain information about the installation and configuration of

the CP 1613 A2 communications processor.

Updated operating instructions on the Internet

You will find the current version of these operating instructions on the Product Support pages

under the following entry ID:

62611661 (https://support.industry.siemens.com/cs/ww/en/view/62611661)

Further documentation

The documents listed below contain more detailed information on commissioning and using

the communications processor.

Enter the entry ID shown below of the relevant manual as the search item.

●

Configuration manual Commissioning PC Stations

This provides you with detailed information on commissioning and configuring SIMATIC

NET PC communications modules.

Entry ID:

109488960 (https://support.industry.siemens.com/cs/ww/en/view/109488960)

●

SIMATIC NET - Industrial Communication with PG/PC

–

Volume 1 – Basics (system manual)

Entry ID:

77376110 (https://support.industry.siemens.com/cs/ww/en/view/77376110)

–

Volume 2 – Interfaces (programming manual)

Entry ID:

77378184 (https://support.industry.siemens.com/cs/ww/en/view/77378184)

The system manuals introduce the topic of industrial communication and explain the

communications protocols used. There is also a description of the OPC interface as

user programming interface.

Preface

CP 1613 A2

6Operating Instructions, 08/2016, C79000-G8976-C303-02

●

Installation manual SIMATIC NET PC Software

This document contains detailed information on installing the "SIMATIC NET

PC Software".

Entry ID:

77377602 (https://support.industry.siemens.com/cs/ww/en/view/77377602)

●

System manual Industrial Ethernet Network Manual

In this document you will find detailed information about setting up an Industrial Ethernet

network.

Entry ID:

27069465 (https://support.industry.siemens.com/cs/ww/en/view/27069465)

SIMATIC NET documentation

You will find the entire SIMATIC NET documentation on the Product Support pages:

15247 (https://support.industry.siemens.com/cs/ww/en/ps/15247)

Go to the required product group and make the following settings:

→Filter criteria for entries →entry type "Manual"

See also

Support (https://support.industry.siemens.com/cs/ww/en/ps)

Trademarks

The following and possibly other names not identified by the registered trademark sign ® are

registered trademarks of Siemens AG:

SIMATIC NET, HARDNET, SOFTNET, CP 1612, CP 1613, CP 5612, CP 5613, CP 5614,

CP 5622

Industry Online Support

In addition to the product documentation, the comprehensive online information platform of

Siemens Industry Online Support at the following Internet address:

Link: (https://support.industry.siemens.com/cs/de/en/)

Apart from news, there you will also find:

●Project information: Manuals, FAQs, downloads, application examples etc.

●Contacts, Technical Forum

●The option submitting a support query:

Link: (https://support.industry.siemens.com/My/ww/en/requests)

●Our service offer:

Right across our products and systems, we provide numerous services that support you

in every phase of the life of your machine or system - from planning and implementation

to commissioning, through to maintenance and modernization.

Preface

CP 1613 A2

Operating Instructions, 08/2016, C79000-G8976-C303-02 7

You will find contact data on the Internet at the following address:

Link: (http://www.automation.siemens.com/aspa_app/?ci=yes&lang=en)

SITRAIN - Training for Industry

The training offer includes more than 300 courses on basic topics, extended knowledge and

special knowledge as well as advanced training for individual sectors - available at more

than 130 locations. Courses can also be organized individually and held locally at your

location.

You will find detailed information on the training curriculum and how to contact our customer

consultants at the following Internet address:

Link: (http://sitrain.automation.siemens.com/DE/sitrain/default.aspx?AppLang=en)

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions only form one element of such a concept.

Customer is responsible to prevent unauthorized access to its plants, systems, machines

and networks. Systems, machines and components should only be connected to the

enterprise network or the internet if and to the extent necessary and with appropriate security

measures (e.g. use of firewalls and network segmentation) in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into

account. For more information about industrial security, please visit

http://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends to apply product updates as soon as available and to

always use the latest product versions. Use of product versions that are no longer supported,

and failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://support.industry.siemens.com/cs/ww/de/ps/15247/pm

SIMATIC NET glossary

Explanations of many of the specialist terms used in this documentation can be found in the

SIMATIC NET glossary.

You will find the SIMATIC NET glossary on the Internet at the following address:

50305045 (http://support.automation.siemens.com/WW/view/en/50305045)

CP 1613 A2

Operating Instructions, 08/2016, C79000-G8976-C303-02 9

Description of the device

Product features

The CP 1613 A2 is a PCI module for connecting PGs/PCs to Industrial Ethernet. The

essential properties are as follows:

●RJ-45 jack for Industrial Ethernet for connecting a TP cable (TP -twisted-pair)

●15-pin D-sub socket for AUI and ITP

The 15-pin D-sub socket with slide locking mechanism is intended for connection of both

AUI transceiver cables (AUI - Attachment Unit Interface) and for connection of ITP cables

(ITP - Industrial Twisted Pair).

●The following data rates are supported:

–10/100 Mbps (half/full duplex)

●Own processor on the CP 1613 A2 relieves the PC/PG CPU

●Autosensing, autonegotiation

●The changeover between the AUI and ITP connector is made automatically by the CP

1613 A2 if you use Siemens ITP cables.

●ISO and TCP/IP transport protocol onboard

Hardware requirements

The CP 1613 A2 requires a PCI slot for operation.

LED display

To indicate module activity, the CP 1613 A2 has two LEDs on the RJ-45 jackl that are lit

when data is being received (green) and when data is being sent (yellow).

Description of the device

CP 1613 A2

10 Operating Instructions, 08/2016, C79000-G8976-C303-02

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SIMOTION D410-2DP/PN Bedienungsanleitung

Siemens

Siemens QPA84 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW44 Bedienungsanleitung

Siemens

Siemens SIKOSTART 3RW35 Handbuch

Siemens

Siemens SIMATIC PN/BACnet LINK Bedienungsanleitung

Siemens

Siemens Synco 700 Bedienerhandbuch

Siemens

Siemens Simatic S7-1500 Benutzerhandbuch

Siemens

Siemens CPU 948 Betriebsanleitung

Siemens

Siemens RAJA+ 3TE7131-1HC14-1A Betriebsanleitung

Siemens

Siemens SINAMICS V20 Inverter Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW44 Bedienungsanleitung

Siemens

Siemens sinumerik fm-nc Installationshandbuch

Siemens

Siemens Stratos Outstation Leitfaden

Siemens

Siemens SIRIUS Series Bedienungsanleitung

Siemens

Siemens LOGO! 24RC Bedienungsanleitung

Siemens

Siemens SIMATIC S7 Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D sl Benutzerhandbuch

Siemens

Siemens Simatic S7-1500R Bedienungsanleitung

Siemens

Siemens SIPART PS2 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-200 Benutzerhandbuch

Siemens

Siemens GDB 1 Series Bedienungsanleitung

Siemens

Siemens Acvatix SAS31.03 Bedienungsanleitung

Siemens

Siemens RDF20U Betriebsanleitung

Siemens

Siemens SIPART DR21 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung