Siemens SIPROTEC 5 Gebrauchsanweisung

SIPROTEC 5 V7.80 and higher

High-Voltage Bay Controller

6MD85/86

Technical Data

Extract from manual C53000-G5040-C015-A, chapter 11

Energy Automation

NOTE

For your own safety, observe the warnings and safety instructions contained in this document, if available.

Disclaimer of Liability

This document has been subjected to rigorous technical

review before being published. It is revised at regular inter-

vals, and any modifications and amendments are included

in the subsequent issues. The content of this document has

been compiled for information purposes only. Although

Siemens AG has made best efforts to keep the document as

precise and up-to-date as possible, Siemens AG shall not

assume any liability for defects and damage which result

through use of the information contained herein.

This content does not form part of a contract or of business

relations; nor does it change these. All obligations of

Siemens AG are stated in the relevant contractual agree-

ments.

Siemens AG reserves the right to revise this document from

time to time.

Document version: C53000-G5040-C015-A.01

Edition: 05.2018

Version of the product described: V7.80 and higher

The disclosure, duplication, distribution and editing of this

document, or utilization and communication of the content

are not permitted, unless authorized in writing. All rights,

including rights created by patent grant or registration of a

utility model or a design, are reserved.

Trademarks

SIPROTEC™, DIGSI™, SIGUARD™, SIMEAS™, and SICAM™

are trademarks of Siemens AG. Any unauthorized use is

illegal. All other designations in this document can be

trademarks whose use by third parties for their own

purposes can infringe the rights of the owner.

Preface

Purpose of the Manual

This manual describes the functions of SIPROTEC 5 high voltage bay controllers.

Target Audience

Protection system engineers, commissioning engineers, persons entrusted with the setting, testing and main-

tenance of automation, selective protection and control equipment, and operational crew in electrical installa-

tions and power plants.

Scope

This manual applies to the SIPROTEC 5 device family.

Further Documentation

[dwprefdm-221012-01.tif, 3, en_US]

•Device manuals

Each Device manual describes the functions and applications of a specific SIPROTEC 5 device. The printed

manual and the online help for the device have the same informational structure.

•Hardware manual

The Hardware manual describes the hardware building blocks and device combinations of the SIPROTEC 5

device family.

•Operating manual

The Operating manual describes the basic principles and procedures for operating and assembling the

devices of the SIPROTEC 5 range.

SIPROTEC 5, High-Voltage Bay Controller, Manual 3

C53000-G5040-C015-A, Edition 05.2018

•Communication protocol manual

The Communication protocol manual contains a description of the protocols for communication within

the SIPROTEC 5 device family and to higher-level network control centers.

•Product information

The Product information includes general information about device installation, technical data, limiting

values for input and output modules, and conditions when preparing for operation. This document is

provided with each SIPROTEC 5 device.

•Engineering Guide

The Engineering Guide describes the essential steps when engineering with DIGSI 5. In addition, the Engi-

neering Guide shows you how to load a planned configuration to a SIPROTEC 5 device and update the

functionality of the SIPROTEC 5 device.

•DIGSI 5 online help

The DIGSI 5 online help contains a help package for DIGSI 5 and CFC.

The help package for DIGSI 5 includes a description of the basic operation of software, the DIGSI princi-

ples and editors. The help package for CFC includes an introduction to CFC programming, basic examples

of working with CFC, and a reference chapter with all the CFC blocks available for the SIPROTEC 5 range.

•SIPROTEC 5/DIGSI 5 Tutorial

The tutorial on the DVD contains brief information about important product features, more detailed infor-

mation about the individual technical areas, as well as operating sequences with tasks based on practical

operation and a brief explanation.

•SIPROTEC 5 catalog

The SIPROTEC 5 catalog describes the system features and the devices of SIPROTEC 5.

•Selection guide for SIPROTEC and Reyrolle

The selection guide offers an overview of the device series of the Siemens protection devices, and a

device selection table.

Indication of Conformity

This product complies with the directive of the Council of the European Communities

on harmonization of the laws of the Member States relating to electromagnetic

compatibility (EMC Directive 2014/30/EU) and concerning electrical equipment for use

within specified voltage limits (Low Voltage Directive 2014/35/EU).

This conformity has been proved by tests performed according to the Council Directive

in accordance with the product standard EN 60255-26 (for EMC directive) and with the

product standard EN 60255-27 (for Low Voltage Directive) by Siemens AG.

The device is designed and manufactured for application in an industrial environment.

The product conforms with the international standards of IEC 60255 and the German

standard VDE 0435.

Other Standards

IEEE Std C 37.90

The technical data of the product is approved in accordance with UL.

For more information about the UL database, see certified.ul.com

Select Online Certifications Directory and enter E194016 as UL File Number.

IND. CONT. EQ.

69CA

[ul_listed_c_us, 1, --_--]

Preface

4 SIPROTEC 5, High-Voltage Bay Controller, Manual

C53000-G5040-C015-A, Edition 05.2018

Additional Support

For questions about the system, please contact your Siemens sales partner.

Support

Our Customer Support Center provides a 24-hour service.

Phone: +49 (180) 524-7000

Fax: +49 (180) 524-2471

E-Mail: [email protected]

Training Courses

Inquiries regarding individual training courses should be addressed to our Training Center:

Siemens AG

Siemens Power Academy TD

Humboldtstraße 59

90459 Nürnberg

Germany

Phone: +49 (911) 433-7415

Fax: +49 (911) 433-7929

E-Mail: [email protected]

Internet: www.siemens.com/poweracademy

Notes on Safety

This document is not a complete index of all safety measures required for operation of the equipment (module

or device). However, it comprises important information that must be followed for personal safety, as well as

to avoid material damage. Information is highlighted and illustrated as follows according to the degree of

danger:

DANGER

DANGER means that death or severe injury will result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

WARNING

WARNING means that death or severe injury may result if the measures specified are not taken.

²Comply with all instructions, in order to avoid death or severe injuries.

CAUTION

CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.

²Comply with all instructions, in order to avoid moderate or minor injuries.

Preface

SIPROTEC 5, High-Voltage Bay Controller, Manual 5

C53000-G5040-C015-A, Edition 05.2018

NOTICE

NOTICE means that property damage can result if the measures specified are not taken.

²Comply with all instructions, in order to avoid property damage.

NOTE

Important information about the product, product handling or a certain section of the documentation

which must be given particular attention.

Qualified Electrical Engineering Personnel

Only qualified electrical engineering personnel may commission and operate the equipment (module, device)

described in this document. Qualified electrical engineering personnel in the sense of this manual are people

who can demonstrate technical qualifications as electrical technicians. These persons may commission,

isolate, ground and label devices, systems and circuits according to the standards of safety engineering.

Proper Use

The equipment (device, module) may be used only for such applications as set out in the catalogs and the

technical description, and only in combination with third-party equipment recommended and approved by

Siemens.

Problem-free and safe operation of the product depends on the following:

•Proper transport

•Proper storage, setup and installation

•Proper operation and maintenance

When electrical equipment is operated, hazardous voltages are inevitably present in certain parts. If proper

action is not taken, death, severe injury or property damage can result:

•The equipment must be grounded at the grounding terminal before any connections are made.

•All circuit components connected to the power supply may be subject to dangerous voltage.

•Hazardous voltages may be present in equipment even after the supply voltage has been disconnected

(capacitors can still be charged).

•Operation of equipment with exposed current-transformer circuits is prohibited. Before disconnecting the

equipment, ensure that the current-transformer circuits are short-circuited.

•The limiting values stated in the document must not be exceeded. This must also be considered during

testing and commissioning.

Preface

6 SIPROTEC 5, High-Voltage Bay Controller, Manual

C53000-G5040-C015-A, Edition 05.2018

Open Source Software

The product contains, among other things, Open Source Software developed by third parties. The Open

Source Software used in the product and the license agreements concerning this software can be found in the

Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those

license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the

event of conflicts between Siemens license conditions and the Open Source Software license conditions, the

Open Source Software conditions shall prevail with respect to the Open Source Software portions of the soft-

ware. The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software

License Conditions provide for it you can order the source code of the Open Source Software from your

Siemens sales contact - against payment of the shipping and handling charges - for a period of at least 3 years

since purchase of the Product. We are liable for the Product including the Open Source Software contained in

it pursuant to the license conditions applicable to the Product. Any liability for the Open Source Software

beyond the program flow intended for the Product is explicitly excluded. Furthermore any liability for defects

resulting from modifications to the Open Source Software by you or third parties is excluded. We do not

provide any technical support for the Product if it has been modified.

When using DIGSI 5 in online mode, you are provided with the option to go to the main menu Show open

source software information and read and display the Readme_OSS file containing the original license text

and copyright information.

To do this, the following steps are necessary:

•Switch to online mode.

•Select the device.

•Select Online in the menu bar.

•Click Show open source software information.

NOTE

To read the Readme_OSS file, a PDF viewer must be installed on the computer.

In order to operate SIPROTEC 5 devices, a valid DIGSI 5 license is required.

SIPROTEC 5, High-Voltage Bay Controller, Manual 7

C53000-G5040-C015-A, Edition 05.2018

Technical Data

11.1 General Device Data 1105

11.2 Protection Interface and Protection Topology 1114

11.3 Date and Time Synchronization 1116

11.4 Automatic Reclosing 1117

11.5 Phasor Measurement Unit 1118

11.6 Circuit-Breaker Wear Monitoring 1119

11.7 External Trip Initiation 1120

11.8 Overcurrent Protection, Phases 1121

11.9 Overcurrent Protection, Ground 1133

11.10 Directional Overcurrent Protection, Phases 1143

11.11 Directional Overcurrent Protection, Ground 1149

11.12 Inrush-Current Detection 1159

11.13 Instantaneous High-Current Tripping 1160

11.14 Stage with Definite-Time Characteristic Curve 1161

11.15 Stage with Inverse-Time Characteristic Curve 1163

11.16 Voltage-Dependent Overcurrent Protection, Phases 1165

11.17 Overvoltage Protection with 3-Phase Voltage 1168

11.18 Overvoltage Protection with Positive-Sequence Voltage 1170

11.19 Overvoltage Protection with Any Voltage 1171

11.20 Undervoltage Protection with 3-Phase Voltage 1173

11.21 Undervoltage Protection with Any Voltage 1176

11.22 Overfrequency Protection 1177

11.23 Underfrequency Protection 1178

11.24 Underfrequency Load Shedding 1179

11.25 Rate of Frequency Change Protection 1181

11.26 Power Protection (P,Q), 3-Phase 1183

11.27 Instantaneous Tripping at Switch onto Fault 1184

11.28 Circuit-Breaker Failure Protection 1185

11.29 Negative-Sequence Protection with Definite-Time Characteristic Curve 1187

11.30 Stage with Inverse-Time Characteristic Curve 1188

11.31 Thermal Overload Protection, 3-Phase – Advanced 1190

11.32 Thermal Overload Protection, 1-Phase 1194

11.33 Temperature Supervision 1197

11.34 Analog-Units Function Group 1198

SIPROTEC 5, High-Voltage Bay Controller, Manual 1103

C53000-G5040-C015-A, Edition 05.2018

11.35 Synchronization Function 1199

11.36 Arc Protection 1201

11.37 Voltage Controller 1202

11.38 Current-Balance Supervision 1206

11.39 Voltage-Balance Supervision 1207

11.40 Current-Sum Supervision 1208

11.41 Voltage-Sum Supervision 1209

11.42 Current Phase-Rotation Supervision 1210

11.43 Voltage Phase-Rotation Supervision 1211

11.44 Trip-Circuit Supervision 1212

11.45 Analog Channel Supervision via Fast Current Sum 1213

11.46 Measuring-Voltage Failure Detection 1214

11.47 Operational Measured Values and Statistical Values 1216

11.48 Energy Values 1220

11.49 CFC 1221

Technical Data

1104 SIPROTEC 5, High-Voltage Bay Controller, Manual

C53000-G5040-C015-A, Edition 05.2018

General Device Data

Analog Inputs

Voltage Input

All current, voltage, and power data are specified as RMS values.

Rated frequency frated 50 Hz, 60 Hz

Input and output modules IO202, IO208, IO211, IO214 IO215

Measuring range 0 V to 200 V 0 V to 7.07 V

Input impedance < 0.1 VA < 0.01 VA

Thermal rating 230 V continuously 20 V continuously

Measuring-Transducer Inputs (via Module ANAI-CA-4EL)

Insulation class SELV (Safety Extra Low Voltage) (according to IEC 60255-27)

Connector type 8-pin multiple contact strip

Differential current input channels 4

Measuring range DC -24 mA to +24 mA

Fault < 0.5 % of the measuring range

Input impedance 140 Ω

Conversion principle Delta-sigma (16 bit)

Permissible potential difference

between channels

DC 20 V

Galvanic separation from ground/

housing

DC 700 V

Permissible overload DC 100 mA continuously

Measurement repetition 200 ms

Measuring-Transducer Inputs (via Module ARC-CD-3FO)

Connector type AVAGO AFBR-4526Z

Number of transceivers 3

Fiber type Polymer Optical Fiber (POF) 1 mm

Receiver

Maximum -10 dBm ± 2 dBm

Minimum -40 dBm ± 2 dBm

Spectrum 400 nm to 1100 nm

Attenuation In the case of plastic optical fibers, you can expect a path attenuation of

0.2 dB/m Additional attenuation comes from the plug and sensor head.

Optical budget 1Minimal 25 dB

Analog sampling rate 16 kHz

ADC type 10-bit successive approximation

Transmitter

Type LED

Wavelength λ = 650 nm

Transmit power Minimum 0 dBm

Maximum 2 dBm

Numerical aperture 0.5 2

Signal rate connection test 1 pulse per second

11.1

11.1.1

Technical Data

11.1 General Device Data

SIPROTEC 5, High-Voltage Bay Controller, Manual 1105

C53000-G5040-C015-A, Edition 05.2018

Andere Handbücher für SIPROTEC 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens RVL482 Bedienungsanleitung

Siemens

Siemens DOL 3TW7291-1A Leitfaden

Siemens

Siemens SSC161.05U Bedienungsanleitung

Siemens

Siemens SIRIUS Series Benutzerhandbuch

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens 6MD85 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-200 Versionshinweis

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens SINUMERIK 810D Merkblatt

Siemens

Siemens IP Controller N350E Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens REA23M Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D Betriebsanleitung

Siemens

Siemens GEB 1 Series Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA142 8XC21 Sries Bedienungsanleitung

Siemens

Siemens Powermite 599 MT Series Betriebsanleitung

Siemens

Siemens HiPath C10 Bedienungsanleitung

Siemens

Siemens CPU 410-5H Process Automation Benutzerhandbuch

Siemens

Siemens SIRIUS 3RW52 Bedienungsanleitung

Siemens

Siemens OpenAir GCA Series Betriebsanleitung

Siemens

Siemens Simatic S7-1500/ET 200MP Benutzerhandbuch

Siemens

Siemens SIPROTEC 5 V7.80 Bedienungsanleitung

Siemens

Siemens REV200 Series Bedienungsanleitung

Siemens

Siemens POS8.4420/109 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung