Siemens SSA911.01TH Bedienungsanleitung

A6V11739247_en--_b Smart Infrastructure

2021-09-03

Smart valve actuator

SSA911.01TH

Wireless radiator valve actuator, works with RDS110.R

ƔRF-controlled actuator communication based on THREAD protocol (2.4 GHz,

bidirectional)

ƔConnection and operation with RDS110.R and optionally RCR114.1

ƔBattery-powered by commercially available 1.5 V AA batteries

ƔValve thread connection M30x1.5 mm

ƔNominal stroke 2.5 mm

ƔValve positioning force 90 N

ƔAutomatic adaptation to valve

ƔIntegrated temperature sensor and PI controller

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

Siemens A6V11739247_en--_b

Smart Infrastructure 2021-09-03

Use

ƔThe SSA911.01TH wireless radiator valve actuator is designed to work on radiator

valves of different manufacturers in HVAC applications using M30x1.5 thread. It operates

the valve to control the water flow and controls the room temperature.

ƔThe valve actuator works only in combination with Siemens Smart Thermostat

RDS110.R and optionally with wireless repeater RCR114.1.

ƔOne RDS110.R can be paired with up to 6 radiator valve actuators in parallel. Up to 3

wireless repeaters RCR114.1 can be used to extend the range of the network.

Smart Thermostat

RDS (Application)

RDS110.R SSA911.01TH RCR114.1

RDS110.R

RCR114.1

SSA911.01TH

Topology with RDS110.R Topology with RCR114.1

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

A6V11739247_en--_b Siemens

2021-09-03 Smart Infrastructure

Functions

Function Description

Communication The communication protocol used is THREAD.

THREAD is a low-power wireless mesh networking protocol and enables device-to-device

and device-to-cloud communication. THREAD is based on IEEE 802.15.4 radio standard.

Parallel operation Up to 6 actuators can be paired and operated with 1 RDS110.R or RCR114.1

Pairing The pairing process must be started on the Smart Thermostat and via HMI on the

SSA911.01TH

Calibration At first start-up, the SSA911.01TH automatically detects the end positions of the radiator

valve and calculates the available stroke. The actuator uses this information for positioning

between 0 and 100 %

Displaying status

information

Actuator status information is indicated on the display

ƔSetpoint temperature

ƔConnection to Smart Thermostat

ƔRadio signal strength

ƔBattery status (only active when the battery is low)

ƔError codes

Connection test When this function is activated, the actuator sends a signal to the connected Smart

Thermostat. Information about the actuator will be shown on the display of the Smart

Thermostat.

Reset and start

new pairing

The current connection to RDS110.R or RCR114.1 is deleted. A new pairing process to

connect to another Smart Thermostat device starts automatically.

Mechanical

adaptation to valve

This function starts a new calibration of the SSA911.01TH to the attached valve.

Factory reset Reset the actuator to factory settings. Any existing connection to RDS110.R or RCR114.1 is

deleted and the stem is retracted.

Firmware version Shows the running version of the firmware.

Back up mode In case of a loss of communication, the internal PI-controller controls the temperature

according to the last setpoint received from the Smart Thermostat using the internal

temperature sensor.

Low batteries When the battery capacity drops to 20 %, the actuator displays the battery symbol as a pre-

warning.

A command is sent to the Smart Thermostat and a low battery indication is shown on the

RDS110.R.

Once the batteries are empty, the actuator sends a signal to the Smart Thermostat controller

and shuts down operation with a minimum valve position of 15 %.

Error codes In case of an actuator malfunction or communication error with the Smart Thermostat, an

error code is shown on the display of the SSA911.01TH. See Error codes [ڰ9]

Type summary

Type Stock no. Description

SSA911.01TH S55181-A101 Smart radiator valve actuator

Scope of delivery

Every SSA911.01TH is supplied with 2 inserted AA alkaline batteries (LR6) and a Quick

guide (A5W00046617).

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

Siemens A6V11739247_en--_b

Smart Infrastructure 2021-09-03

Accessories

Adapter AV.. for third-party valves

Type (= stock no.) For radiator valves from:

AV51 Beulco distributor M30x1.0

AV52 Comap

AV53 Danfoss RA-N (RA2000)

AV54 Danfoss RAVL

AV56 Giacomini

Theft protection kit

Type Stock no.

ATN5 S55845-Z244

The theft protection kit secures the actuator; it prevents the batteries from being removed

and the actuator from being unscrewed from the radiator valve without the use of a tool.

Equipment combinations

Siemens valves

The SSA911.01TH is suited for use with the following types of Siemens radiator valves:

Type kVS

[m3/h]

PN Data sheet

VDN1.., VEN1..

Radiator valves 0.25…1.41

CE1N2105

VDN2.., VEN2.., VUN2.. CE1N2106

VD1..CLC.. 1.9…2.6 CE1N2103

VPD.., VPE.. MCV radiator valves 0.02…0.48 CE1N2185

VD1.., VE1.. * Radiator valves 0.25…3.4 CE1N2145,

VD2.., VE2.., VU2.. * CE1N2146

For radiator valves with AV.. adapters, see Accessories [ڰ4]

kVS = Nominal flow rate of chilled water (5…30 °C) through the fully opened valve (H100) at a differential

pressure of 100 kPa (1 bar)

* No longer available

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

A6V11739247_en--_b Siemens

2021-09-03 Smart Infrastructure

Third-party valves without adapter

The SSA911.01TH can operate third-party radiator valves without adapter, provided they

have a M30x1.5 mm connecting thread and meet the following requirements:

Force 90 N nominal

Fully closed x > 9.0 mm

Fully open y 14.5 mm

Valves of the following manufacturers may be used with the SSA911.01TH:

ƔHoneywell MNG

ƔCazzania

ƔHeimeier

ƔTA

ƔFinimetall

ƔOventop M30x1.5 (from 2001 onward)

ƔJunkers

ƔDanfoss

Valve pre-adjustment / kV-limitation

For valve pre-adjustments, refer to the relevant technical documentation on the valves.

Ensure a minimum valve stroke of > 0.5 mm.

Product documentation

Title Contents Document ID

Smart valve actuator

SSA911.01TH

Data sheet: product description A6V11739247

Quick guide Smart Valve

Actuator SSA911.01TH

Instructions for mounting, commissioning and

operating SSA911.01TH

A5W00046617

Mounting instructions Smart

Thermostat RDS110.R

Instructions for mounting RDS110.R A5W90008181

Quick guide Smart Thermostat

RDS110.R

Instructions for commissioning and operating

RDS110.R

A5W90008183

Smart Thermostat Wireless

RDS110.R

Data sheet: product description A6V11562461

RDS110.R Smart Thermostat

Wireless – User Guide

Detailed information on RDS110.R, including

installation, commissioning and operation

A6V11562455

Mounting instructions Smart

Thermostat Receiver RCR114.1

Instructions for mounting RCR114.1 A5W90008182

Quick guide Smart Thermostat

Receiver RCR114.1

Instructions for commissioning and operating

RDS110.R

A5W90008184

Smart Thermostat Receiver

RCR114.1

Data sheet: product description A6V11562464

Related documents such as environmental declarations, CE declarations, etc., can be

downloaded at the following Internet address:

http://siemens.com/bt/download

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

Siemens A6V11739247_en--_b

Smart Infrastructure 2021-09-03

Notes

Security

CAUTION

National safety regulations

Failure to comply with national safety regulations may result in personal injury and property

damage.

ƔObserve national provisions and comply with the appropriate safety regulations.

WARNING

Burns from hot surface

The screw nut with which the actuator is fastened on the radiator valve will become hot.

Risk of burns from contact with the screw nut.

When servicing the actuator:

ƔSwitch off the radiator.

ƔAllow the radiator to cool off.

WARNING

Explosion due to fire or short circuit, even with discharged batteries

Risk of injury due to flying parts

ƔPrevent the batteries from coming into contact with water.

ƔDo not recharge batteries.

ƔDo not damage or disassemble batteries.

ƔDo not beat batteries over 85 °C.

WARNING

Leakage of electrolyte

Severe burns

ƔHandle damaged batteries only wearing suitable protective gloves.

ƔIn case of contact with electrolyte, rinse eyes immediately with plenty of water. Consult

a doctor.

Observe the following:

ƔObserve the polarities (+/-).

ƔThe batteries must be new and undamaged.

ƔDo not mix new and used batteries.

Store, transport and dispose of the batteries in compliance with local requirements,

regulations and laws. Also observe the instructions of the battery manufacturer.

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

A6V11739247_en--_b Siemens

2021-09-03 Smart Infrastructure

Mounting

The SSA911.01TH is mounted on the radiator valve. There are no preferred mounting

positions; the actuator SSA911.01TH may be operated in all mounting positions. Make sure

the display is visible and the button is accessible.

WARNING

Falling objects

Overhead installation may result in injury from falling objects.

ƔDo not install the actuator more than 2 m above ground.

Firmly tighten the screw nut by hand. No tools are required to tighten the actuator on the

valve.

Commissioning

Install and commission the RDS110.R and (optionally) the RCR114.1

Choose the “Radiator valve” application on the Smart Thermostat (for documentation,

see Product documentation [ڰ5])

Start the installation and commissioning of the SSA911.01TH (see also Quick guide

A5W00046617)

1. Mechanical mounting of the SSA911.01TH on the radiator valve

– Tighten the threaded screw nut firmly by hand (do not use tools)

2. Remove plastic slip securing the batteries from the SSA911.01TH and wait for the

actuator to start up (approximately 5 s)

3. Press the button on the SSA911.01TH for automatic calibration process (> 2 s) and wait

for the confirmation of the calibration on the display

4. Start the pairing process on the RDS110.R in the advanced setting menu by pressing

“Pair new devices”

5. Press the button on the SSA911.01TH to start pairing (> 2 s). Pairing to Smart

Thermostat will take around 30 s.

ÖIf several devices are used in parallel, make sure only one device at a time is in

pairing mode. Otherwise, the pairing will not be successful.

ÖOnce the SSA911.01TH is paired to the RDS110.R, the display will confirm the con-

nection and switch off.

The SSA911.01TH is now controlled by the Smart Thermostat

Unsuccessful pairing or calibration to the valve is indicated by an error code on the display

(see Error codes [ڰ9]).

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

Siemens A6V11739247_en--_b

Smart Infrastructure 2021-09-03

Operation

HMI

The interface consists of an LCD display [1] and one push

button [2].

During normal operation, the display is switched off in order

to conserve energy and ensure a long battery life.

Display Function Description

THREAD Communication Blinks during pairing mode with Smart Thermostat

Valve adaptation Shown during adaptation of the actuator to the radiator valve

Confirmation / acknowledgment Confirms a positive result after any successful operation

Low battery status Shown when status information feature is activated if the battery

is low

Connection test Shown for 30 s while a connection test is performed

The ID of the connected device will be shown on the RDS110.R

display

Key lock Shown when pressing the button if key lock mode is activated

In key lock mode, no manipulation on the actuator is possible.

Error Shown with error code when an error has occurred

Disappears when normal status has been reached again

Factory reset Shown during a factory reset process

Setpoint temperature

Temperature unit

Interactive symbols shown during pairing, adaptation and factory reset functions:

Ɣno: appears after choosing function

– short button press (< 1 s) exits the function, turns the display off and sends the actuator

to sleep mode

– long button press (> 2 s) confirms the chosen function

Ɣyes: appears after confirming the function (except during factory reset)

ƔGo: indicates the confirmed function is starting

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

A6V11739247_en--_b Siemens

2021-09-03 Smart Infrastructure

Error codes

In case of an actuator malfunction or communication error with the Smart Thermostat, an

error code is shown on the display of the SSA911.01TH.

Error codes cannot be acknowledged on the SSA911.01TH. The error code is shown on the

display for as long as the error is active and will disappear once normal status has been

reached.

Error notifications are also sent to the Smart Thermostat and shown on the Smart

Thermostat display. E53 is at first only shown on SSA911.01TH and not immediately shown

on the Smart Thermostat. It will take some time to appear on the Smart Thermostat.

Code Error Cause Measures

Automatic

adaptation failed

ƔThe actuator did not correctly adapt to the valve

or could not detect the end positions of the valve

ƔThe actuator is not connected to a radiator valve

ƔCheck the valve type and stroke

compatibility with the SSA911.01TH and

repeat the adaptation

ƔCheck the mechanical valve connection,

adjust, and repeat the adaption

ƔEnsure that the valve is working correctly

and that the valve stem is not stuck and

repeat the adaptation

Mechanical valve

actuator error

ƔThe movement of the actuator was too short to

detect the end positions of the valve

ƔMotor movement failure

ƔThe actuator is not connected to a radiator valve

ƔThe stroke and/or end positions of the valve are

not compatible with the SSA911.01TH

No controller

found –pairing

failed

ƔNo RDS110.R or RCR114.1 is available to

connect

ƔThe Smart Thermostat is out of range

ƔRF chip failure

ƔCheck and adjust the settings on Smart

Thermostat and re-start the pairing

process

ƔDecrease the distance between the

SSA911.01TH and the Smart

Thermostat and re-start the pairing

process

Connection to

Smart Thermostat

lost

ƔThe current connection to the Smart Thermostat

is not available anymore (RF chip failure)

ƔThe paired RDS110.R or RCR114.1 is not

available anymore (e.g. loss of power)

ƔThe Smart Thermostat is out of range

ƔCheck the power supply and availability

of the Smart Thermostat

ƔDecrease the distance between the

SSA911.01TH and the Smart

Thermostat

No new pairing process is required

to resolve E53. The SSA911.01TH

will automatically re-

connect to the

Smart Thermostat once the

network is available again.

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

Siemens A6V11739247_en--_b

Smart Infrastructure 2021-09-03

Maintenance

The SSA911.01TH is maintenance free.

The actuator and the Smart Thermostat will indicate when replacing the batteries is required

approximately 2 months before the batteries are completely empty and the actuator switches

off.

Disassembly

NOTICE

Dismounting the Smart Valve Actuator

Dismounting the SSA911.01TH while the stem is extended puts the actuator in an unde-

fined state that makes re-mounting the actuator without damaging it very difficult.

ƔBefore dismounting the SSA911.01TH from the valve, always perform either a new me-

chanical adaptation to the radiator valve or a factory reset to retract the stem.

- Mechanical adaptation to valve: keep the button pressed 9…12 s.

- Factory reset: Keep the button pressed for 12…16 s.

Replacing the batteries

To replace the batteries, the SSA911.01TH should remain mounted on the radiator valve

and the Smart Thermostat should remain on power and switched on.

If it is necessary to remove the actuator from the valve, a factory reset or new adaptation

must first be performed (see above, Disassembly [

ུ

10]).

Replacing the batteries does not require any tools. For optimal performance, the use of high

performance alkaline batteries is recommended.

1. Remove the batteries

– Open the white battery cover [1]

– Remove the metallic slider [2]

– Take the batteries out [3]

Hindustan Hydraulics & Pneumatics, Chennai - 01.

Phone : 2534 3066, 2534 5625, 2534 5587

E-Mail : hhp@hindustanhydraulic.in

Contact person : V. Anandha krishnan - 98409 21885

Andere Handbücher für SSA911.01TH

Andere Siemens Controller Handbücher

Siemens

Siemens SITRANS L 7ML5400 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW40 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW5 series Technisches Dokument

Siemens

Siemens SITRANS I100 7NG4124-0AA00 Bedienungsanleitung

Siemens

Siemens OpenAir GCA Series Betriebsanleitung

Siemens

Siemens GDA Series Bedienungsanleitung

Siemens

Siemens SQD Series Bedienungsanleitung

Siemens

Siemens HiPath C10 Bedienungsanleitung

Siemens

Siemens 3VA9 Series Bedienungsanleitung

Siemens

Siemens SINUMERIK MCU1720 Technisches Dokument

Siemens

Siemens SIMATIC 500 Bedienungsanleitung

Siemens

Siemens Desigo RXC20.1 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens EM 300 Bedienungsanleitung

Siemens

Siemens RWD68 Bedienungsanleitung

Siemens

Siemens IP Controller N350E Bedienungsanleitung

Siemens

Siemens OpenAir GDB181.1E/3 Bedienungsanleitung

Siemens

Siemens FDV241 Installations- und Betriebshandbuch

Siemens

Siemens LOGO! 24RC Bedienungsanleitung

Siemens

Siemens N 567/01 Bedienungsanleitung

Siemens

Siemens SEZ50MB Bedienungsanleitung

Siemens

Siemens SIMATIC S5-100U Bedienungsanleitung

Siemens

Siemens RVP36 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung