Siemens Gigaset 4210 Bedienungsanleitung

DO NOT RETURN

THIS PRODUCT TO THE STORE!

Please read the following important information.

For Siemens Customer Care, product operation

information, or for problem resolution, call toll-free

1-888-777-0211

7 a.m. to 10 p.m. Central Standard Time EVERY DAY

www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

Basic Steps for Getting Started

For optimal performance of your system, please follow all of these steps.

For fu detai s, see the User Manua .

Customer Care: 1-888-777-0211

Or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español. PB4210QSG

Gigaset 4210

Quick Start Guide

Customer Care: 1-888-777-0211 or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

IMPORTANT: For best reception, place the base in a high central

location, away from other electrical de ices. The installation of

the base unit should allow at least 8-inches between the base and

persons to be in compliance with FCC RF exposure guidelines.

STEP 1 Base Station Setup

At the Base Station:

1Insert small plug on cord into phone

jack. Place cord in base cable

channel. Insert power supply unit

into wall outlet.

2Insert plug on telephone cord into

telephone jack on base unit (clicks

into place). Place cord in cable

channel on bottom of base. Insert

other end of plug into telephone

jack on wall. Bottom view of base

Page/

Registration

button

STEP 2 Handset Setup / Registration

IMPORTANT: Charge batteries 12 to 14 hours before using the

handset for the first time.

–

At the Han set:

1Remove protective plastic film from display.

2Insert batteries as shown.

Telephone

jack an

cor

Power

supply unit

an cor

110 VAC

60 Hz

4Be sure power

supply is

plugged into

wall outlet.

3Place battery cover on back of handset

and push gently upward until it clicks into

place.

5or auto registration

to base, press and

hold the END key to

turn handset off and

place in base station

with display facing

out for 1 minute.

STEP 3 Area Codes

Customer Care: 1-888-777-0211 or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

If you subscribe to Caller ID from your local telphone company, complete

the steps below. If you do not subscribe to Caller ID, skip this section.

To call back from the Call Log, you must enter and store the Local Area

Code for the area where your phone is installed. If your phone is

installed in an area with multiple area codes, you will also have to enter

and store the Extra Codes for that area.

STORING LOCAL AREA CODE

1Open the Menu.

2Scroll to Base Settings and press OK.

3Scroll to Area Codes and press OK.

4Scroll to Local Area Code and press OK.

5Enter your area code and press OK.

STORING EXTRA AREA CODES

1Open the Menu.

2Scroll to Base Sett and press OK.

3Scroll to Area Codes and press OK.

4Scroll to  xtra Codes and press OK.

5To enter an extra area code, press Menu.

6Enter an extra area code and press OK.

Repeat steps 5 and 6 above to enter additional area codes.

Customer Care: 1-888-777-0211 or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

BASIC PHONE OPERATION

Making a Call 1Dial desired number.

2Press c or u speakerphone key.

3Press a or place handset in base (or charger) to

hang up.

See Gigaset 4210 or 4215 User Manual for voice dialing instructions.

Answering Call Press c or u speakerphone key.

Intercom Call 1Lift handset and select the handsets intercom number

F and press c.

2Or, press the handset number, such as F, .

3Or, select Intercom Call and press c.

4Or, select F, « to call all handsets.

Setting Volume 1Open the Menu G.

2Scroll to Sound Settings D and

press OK.

3Select Handset Volume and press OK.

You will hear the current volume of the speakerphone

and its level is displayed. Scroll to the desired volume

and press Save. You will hear and see in the display

the confirmation of the change.

4To set earpiece volume, scroll down D, select

desired earpiece volume G, and press Save.

Language Setting 1Open the Menu G .

2Scroll to H/Set Settings D and press

OK.

3Scroll to Language and press OK.

4Select the desired language and press OK.

A check mark appears next to the selected language.

Paging Handset Press the page button on the base bottom.

MENURDL

Int 2

05.20.01 10:30

HANDSET NAVIGATIONAL OPERATION

Signal strength:

Ðstrong

Ñme ium

Òweak

Date

Navigational (Navi) key

Talk k ey

In the Display:

Current functions

Press the navigational (Navi) key H

to navigate through the handset options.

Navi Control Telephone Idle Action Lists and Menus Entry Field

EHold down for Voice Dialing Upward Cursor up

DOpen Directory Downward Cursor down

GOpen Menu Select entry (OK) Cursor right

FList of internal intercom users One menu level back (cancel) Cursor left

Charging status:

Ý battery empty

battery low when flashing

Ú battery fully charge

Time

Soft keys:

Press the correspon ing si e

of the left or right soft key to

activate the function shown

in the isplay.

En call an On/Off key

Scroll to the left an right

when entering numbers or

messages.

Delete key (backspace):

Delete input from right to left.

Display and Soft Keys

Customer Care: 1-888-777-0211 or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

Navigation Display Symbols

<> X

××

The handset Directory will store up to 200 telephone numbers.

STORING DIRECTORY ENTRIES

1Open the Directory by pressing the Navi key on bottom D.

2Scroll to New ntry and press OK.

3Enter the telephone number and press OK.

4Scroll and enter the name and press OK.

5Press Menu G.

6Save entry by pressing OK.

DIALING FROM DIRECTORY

1Open the Directory by pressing the Navi key on bottom D.

2Enter the first letter of the name as entered

(for example, press ^ 2 x for E, Eric).

3Press the Talk cor Speakerphoneu key and the number is dialed.

The Memory dial list will store up to 9 telephone numbers. It is recommended that the 1

key be used for the answering machine or telephone company voice mail access.

STORING MEMORY ENTRIES

1Press the MemoryC key.

2Scroll to New ntry and press OK.

3Enter the telephone number and press OK.

4Using handset keypad, select a quick access key. Press the desired key

(2-9) and then enter the name (for example, to use quick access key 3

for Eric press ^ 4 x for 3, press ^ 2 x for E, press ¤ 3 x for

R, press ¡ 3 x for I, press  3 x for C).

5Press OK.

6Press Menu G.

7Save entry by pressing OK.

DIALING FROM MEMORY

1Press and hold the quick access key.

2Press the Talk cor Speakerphoneu key and the number is dialed.

Memory key

Customer Care: 1-888-777-0211 or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

DIRECTORY AND MEMORY DIALING

Siemens GigaVoice voice-operated controls for the 4200 series allow users to place calls

or hear whos calling. The system recognizes up to 20 names and numbers from the

directory and up to four users may record the same name or number. Subscription to Caller

ID from your local telephone company is required.

RECORDING A VOICE-DIAL ENTRY

1Open the Directory by pressing the Navi key on bottom.

2Press Speech.

3Select user 1-4 and press OK.

4Scroll to New ntry and press OK.

5Enter the telephone number.

6Scroll to the name field and enter the name.

7Press Record.

8Press Begin to start recording and speak the name of the desired

entry (for example Anne) to record a voice pattern.

9Repeat the name (for example Anne).

10 Press Save.

DIALING WITH YOUR VOICE

1Press the Navi key on top.

2At the prompt, speak the recorded voice pattern (for example Anne).

3When the voice pattern is recognized, the name is played back from

the handset and the number is dialed.

VOICE-ANNOUNCED CALLER ID

If the Caller ID telephone number transmitted for an incoming call corresponds to a

voice-dial entry, the voice pattern is played back on the loudspeakers of the handset

or base station.

1To turn on the Voice-Announced Caller ID feature, press Menu.

2Scroll to Base Settings and press OK.

3Scroll to Spec. Functions and press OK.

4Scroll to Caller ID and press OK (checkmark indicates feature is on).

Customer Care: 1-888-777-0211 or visit our ebsite: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

VOICE-OPERATED CONTROLS

Andere Handbücher für Gigaset 4210

Inhaltsverzeichnis

Andere Siemens Schnurloses Telefon Handbücher

Siemens

Siemens Gigaset E1 Bedienungsanleitung

Siemens

Siemens Gigaset E450 Bedienungsanleitung

Siemens

Siemens Gigaset 3000 Comfort Bedienungsanleitung

Siemens

Siemens Gigaset CL100 Bedienungsanleitung

Siemens

Siemens 242 Bedienungsanleitung

Siemens

Siemens Hicom cordless EM Bedienungsanleitung

Siemens

Siemens Gigaset C2 Bedienungsanleitung

Siemens

Siemens Gigaset C590 Bedienungsanleitung

Siemens

Siemens Gigaset C47H Bedienungsanleitung

Siemens

Siemens Gigaset C345 Bedienungsanleitung

Siemens

Siemens Gigaset S790 Bedienungsanleitung

Siemens

Siemens Gigaset 4000 Comfort Bedienungsanleitung

Siemens

Siemens Gigaset SL78H Bedienungsanleitung

Siemens

Siemens Gigaset SL 740 Bedienungsanleitung

Siemens

Siemens Gigaset 4015 Bedienungsanleitung

Siemens

Siemens Gigaset 4015 Bedienungsanleitung

Siemens

Siemens Gigaset SL785 Bedienungsanleitung

Siemens

Siemens Gigaset 3070 isdn Bedienungsanleitung

Siemens

Siemens Gigaset E360 Bedienungsanleitung

Siemens

Siemens CT200 Bedienungsanleitung

Siemens

Siemens Gigaset S455 Bedienungsanleitung

Siemens

Siemens Gigaset 4215 Bedienungsanleitung

Siemens

Siemens Gigaset S645 Bedienungsanleitung

Siemens

Siemens Gigaset C595 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung