Siemens Gigaset A 110 Bedienungsanleitung

Gigaset A110 s

Special features of the A 110

◆Notepad

◆Pen holder with STABILO rollerball pen. The pen is available in all good

stationery and office supplies shops

◆Ringer off key

◆Handset volume and ringer volume setting via function key

Star key

- Answer a call

- Initiate dialling

Last number

redial key End call key

- Hold down:

on/off

- End call

- Cancel function

- Enter the menu

- Confirm input

(save)

Microphone

Battery charging

status

Display

(display screen)

= Battery flat

UBattery fully charged

flashing: Battery almost

flat

0 1 2 3 4 5 6 7 8 9

U

Hold down:

R key function (flash)

Ringer off key

Key 0

Hold down: Temporarily

switch to DTMF dialling

Set/OK key Function key

In idle status:

-Directory

- Caller list

In lists: Scroll

When the telephone is

ringing: Set ringer volume

During a call:

Set handset volume

Entering numbers and letters:

Delete function

Talk key

Activate/deactivate ringer

Display symbols

- Ringer off

- New entry in

caller list

-Entering

numbers/letters:

the fkey deletes

the character to the left

of the cursor

Special characters:

nHash (#)

RRecall key

Coloured label

Ontario.fm Seite 1 Freitag, 28. November 2003 2:35 14

A31008- A110- J100- 1- 7619

Version: 28.11.2003

Issued by

Information and Communication mobile

Schlavenhorst 88

D-46395 Bocholt

Right of modification reserved.

Printed in Germany

Siemens Aktiengesellschaft

http://www.my-siemens.com

Order No.: A31008-A110-J100-1-7619

Version: 28.11.2003

Ontario.fm Seite 2 Freitag, 28. November 2003 2:35 14

Safety precautions

Not all of the functions described in this manual are available in all countries.

WRead this manual and the safety precautions carefully before use.

Explain their content to your children, and the potential hazards

associated with using the telephone.

Only use the power supply unit supplied as indicated on the

underside of the base.

Insert only approved rechargeable batteries of the same type!

i. e. Never use ordinary (non-rechargeable) batteries as they may

pose a health hazard or cause injury.

Insert rechargeable batteries ensuring correct polarity (symbols are

marked in the

handset battery compartment).

The operation of medical appliances may be affected. Be aware of

the technical conditions within the particular environment (e.g.

doctor's practice).

The handset may cause an intrusive "hum" in hearing aids. Do not

hold the handset against your ear while it is ringing (incoming call).

Do not install the phone in a bathroom or shower room. The handset

and base station are not splash proof (see page 13).

Do not use the phone in environments subject to an explosion

hazard (e. g. auto paint shops).

If you give your telephone to someone else, make sure you also give

them the operating manual.

Dispose of the batteries and phone in accordance with

environmental regulations.

‹

Ontario.fm Seite 3 Freitag, 28. November 2003 2:35 14

Setting up the telephone for use

Connecting the base station

◆Insert the round jack on the mains cable into the socket on the

underside of the base.

◆Position cable in the cable recess (for strain relief).

◆Plug the power supply unit into your power outlet.

◆Insert the square jack on the telephone cable supplied into the socket

on the underside of the base.

◆Position cable in the cable recess.

◆Plug the telephone jack into the phone socket.

◆Only use the power supply unit supplied as indicated on the

underside of the device.

◆If you buy another cable, ensure that it has the correct

assignment.

Germany: 3-4 assignment of telephone lead/EURO CTR37.

◆Keep the power supply unit plugged in at all times to ensure

your phone is ready for use whenever you need it.

Power supply unit

with mains cable

(220/230 V)

Phone jack with

phone cord

Ontario.fm Seite 4 Freitag, 28. November 2003 2:35 14

Setting up the handset for use

The display is protected by a plastic film. Remove the protective plastic film!

Remove the coloured label from the bag containing the batteries and stick it

to the top of the handset (see illustration on page 1).

Inserting the batteries

◆To open the battery compartment, press the clip on the compartment

cover inwards and lift off the cover.

◆Insert the batteries ensuring correct polarity (see figure on left).

◆To close, replace the battery compartment cover as shown and then close

it until it locks into place.

Registering the handset on the base

In order for you to be able to make calls, you must register the handset on the

base.

The display shows "*--*--*". Now place the handset on the base with the

display facing forwards, the display shows REGISTER HS. After around one

minute the handset is registered on the base. The idle display is shown (only

battery symbol and the internal number of the handset in the top left).

If "automatic registration" has not been successful after approx. 1 minute, it is

necessary to either remove the handset from the base for approx. 5 seconds

and then replace it or to register the handset manually (see page 10).

◆Only insert rechargeable batteries of the same type, as

recommended by Siemens on see page 14, i. e. Never use

ordinary (non-rechargeable) batteries as they may pose a

health hazard or cause injury.

◆Do not use a non-Siemens charging unit as this could damage

the batteries.

Ontario.fm Seite 5 Freitag, 28. November 2003 2:35 14

Charging batteries

Leave the handset in the base for approx. five hours to charge the batteries.

Your unit is now ready to use and you can make calls.

After initial charging, you can return your handset to the base after every call.

Charging is controlled electronically. This ensures optimum battery charging

without overloading. The batteries heat up during charging. This is normal

and not dangerous. The battery charging status is correctly displayed only

after uninterrupted charging/discharging. You should therefore avoid opening

the battery compartment unnecessarily. The battery charge capacity

decreases after a few years for technical reasons some time.

Making calls

Calling and ending calls

~(Enter the number), press c(talk key).

To end the call: Press a (end call key).

You can also press the talk key cfirst and then enter the number – each

digit is dialled immediately.

You can use the end call key ato cancel dialling.

Answering a call

Your telephone rings (ringer) and the talk key flashes.

cPress the (talk key).

Last number redial

Your handset automatically saves the last five telephone numbers dialled. If

names have been saved for these numbers in the directory, then these names

will be displayed.

jOpen the last number redial list.

sSelect the desired entry.

cPress the talk key – the telephone number is dialled.

Ontario.fm Seite 6 Freitag, 28. November 2003 2:35 14

Calling Line Identification (CLIP)

When you receive a call, the caller's telephone number is displayed in the

display.

Preconditions:

1. You have asked your network provider to display the caller’s telephone

number in your display (CLIP).

2. The caller has asked the network provider for his number to be identified

(CLIR).

Directory

In the directory, you can store up to 20 telephone numbers (max. 22 digits)

and the associated names (max. 12 characters).

Save new entry

Dialling with the directory

iYou may have to pay a charge to use calling line identification.

Please ask your network provider for details.

hOpen the directory.

sg Scroll to entry <NEW?> and confirm.

~g Enter phone number and confirm.

~g Enter the name and confirm.

The display SAVED appears and you hear the

confirmation tone.

hOpen the directory.

sScroll to the desired entry.

cPress the talk key. The phone number is dialled.

Ontario.fm Seite 7 Freitag, 28. November 2003 2:35 14

Editing an entry

Deleting an entry

Caller list

The caller list contains the last 10 missed calls. If it includes new entries

the Ûsymbol flashes in idle status.

Dialling from caller list or deleting an entry

New entries in the caller list are indicated by the jsymbol in the top left of the

display. At the end of the list, "----ESC----" is displayed.

hOpen the directory.

sg Select desired entry and confirm.

~Edit the telephone number as required.

gConfirm entry.

~Edit the telephone number as required.

gConfirm the entry, the display SAVED appears and you

hear the confirmation tone.

hOpen the directory.

sSelect the desired entry.

gHold down the key, DELETE? is displayed.

gConfirm the entry, DELETED is displayed and you hear

the confirmation tone.

fOpen caller list.

sSelect the desired entry.

cDial the number.

or ...

gHold down. The entry is deleted.

or ...

aExit the caller list.

Ontario.fm Seite 8 Freitag, 28. November 2003 2:35 14

Cutting into an external call

At least two handsets are registered on the base. You are conducting an

external call. An internal party can can cut into this call and take part in the

conversation. This is indicated by a signal tone.

Precondition: The BARGE IN function is activated (idle status: On).

Activating/deactivating the function

Cutting in

Precondition: A handset is conducting an external call.

cPress the talk key.

gOpen the menu.

[______________________________________________]

sBARGE IN gConfirm (On = ´).

aPress end call key.

cPress the talk key. You are linked into the

call. The display of both handsets shows

CONFERENCE.

aEnding a conference: Press end call key.

iOnly one handset can cut into an external call.

Ontario.fm Seite 9 Freitag, 28. November 2003 2:35 14

Manually registering Gigaset A 11 handsets.

You can register up to three Gigaset A 11 handsets on your Gigaset A 110.

However, internal calls between the handsets are not possible.

Gigaset A 11 handset on Gigaset A 110 base

Manual registration is necessary if

◆automatic registration was unsuccessful,

◆the handset supplied has been replaced.

Step 1:

Step 2:

Place handset on the base.

After registration, the handset reverts to idle status and you hear the

confirmation tone.

Gigaset A 11 handset on other GAP bases

Step 1:

Set the base to a status where it is ready for registration (see operating manual

for the base).

Step 2:

After registration the handset reverts to idle status.

gOpen the menu.

[______________________________________________]

sREGISTER HS gSelect the menu item and confirm.

[______________________________________________]

BASE gConfirm. The display shows

"*--*--*".

gOpen the menu.

[______________________________________________]

sREGISTER HS gSelect the menu item and confirm.

[______________________________________________]

sGAP 1 gSelect the menu item and confirm.

"PIN" appears in the display.

Enter the registration PIN for the

GAP base that is ready for registration

(e.g. "0000").

gConfirm entry.

Ontario.fm Seite 10 Freitag, 28. November 2003 2:35 14

Inhaltsverzeichnis

Andere Siemens Schnurloses Telefon Handbücher

Siemens

Siemens CT200 Bedienungsanleitung

Siemens

Siemens Gigaset S79H Bedienungsanleitung

Siemens

Siemens Model 240 Bedienungsanleitung

Siemens

Siemens Gigaset C590 Bedienungsanleitung

Siemens

Siemens A31003-D3000-M100-01-76A9 Bedienungsanleitung

Siemens

Siemens Gigaset S68H Bedienungsanleitung

Siemens

Siemens Gigaset 3070 isdn Bedienungsanleitung

Siemens

Siemens Gigaset E450 SIM Bedienungsanleitung

Siemens

Siemens Gigaset E49H Bedienungsanleitung

Siemens

Siemens Gigaset E490 Bedienungsanleitung

Siemens

Siemens Gigaset 4170 ISDN Bedienungsanleitung

Siemens

Siemens Gigaset SL 740 Bedienungsanleitung

Siemens

Siemens Gigaset 4215 Bedienungsanleitung

Siemens

Siemens GIGASET C470 IP Bedienungsanleitung

Siemens

Siemens Dualphone DP450 Bedienungsanleitung

Siemens

Siemens Gigaset E1 Bedienungsanleitung

Siemens

Siemens Gigaset SL78H Bedienungsanleitung

Siemens

Siemens Gigaset S185 Bedienungsanleitung

Siemens

Siemens Gigaset S880 Bedienungsanleitung

Siemens

Siemens 242 Bedienungsanleitung

Siemens

Siemens GIGASET C470 IP Bedienungsanleitung

Siemens

Siemens W10 Bedienungsanleitung

Siemens

Siemens Gigaset AS280 Bedienungsanleitung

Siemens

Siemens Gigaset C595 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung