Siemens PXC00-PE96.A Bedienungsanleitung

Installation Instructions

Document No. 565-719

July 22, 2016

Andover Infinet Driver for PXC Modular

Item Number 565-719, Rev. BA Page 1 of 2

These installation instructions only cover the

connection of the Andover Inﬁnet Driver to the

Andover Infinet network. For hardware installation of

the PXC Modular Controller, see PXC Modular

Series Installation and Quick Start (553-638).

Product Description

The Andover Infinet Driver enables communication

between the APOGEE®Automation System and the

Andover Infinet/Infinet II devices.This is done by

removing the Andover CX Network Controller and

replacing it with the Andover Infinet Driver, allowing

the Driver to control the Andover Infinet network.

Product Numbers

PXC00-PE96.A

PXC Modular RS-485 or

Ethernet ALN, 96 FLN nodes

PXC100-PE96.A

PXC Modular RS-485 or

Ethernet ALN, TX-I/O

Support, 96 FLN nodes

PXX-485.3

Expansion Module, three RS-

485 FLN connections

LSM-INT-ANDVRINET

PXC Modular Andover Driver

License

Warning/Caution Notations

WARNING:

Personal injury/loss of life may

occur if you do not follow the

procedures as specified.

CAUTION:

Equipment damage, or loss of

data may occur if you do not

follow the procedures as

specified.

Required Tools

Flat-blade screwdriver (1/8-inch blade

width).

Wire strippers.

CAUTION:

Always wear an electro-static discharge wrist

strap and discharge accumulated static before

touching field panel components.

Expected Installation Time

30 minutes

Prerequisites

Driver hardware is installed according to its

respective installation instructions.

FLN Expansion Module is installed

according to its respective installation

instructions.

Depending on the type of installation, other

prerequisites may have to be completed.

Document No. 565-719

Installation Instructions

July 22, 2016

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as

design improvements are introduced. APOGEE and Insight are registered trademarks of Siemens Industry, Inc. Other product or company

Siemens Industry, Inc.

Building Technologies Division

1000 Deerfield Parkway

Buffalo Grove, IL 60089-4513

USA

Tel: + 847-215-1000

Your feedback is important to us. If you have

comments about this document, please send

them to SBT_technical.editor@siemens.com

Document No. 565-719

Printed in the USA

Page 2 of 2

Connecting the Andover Infinet

Driver to the Andover Infinet

Network

Follow these steps to connect the Andover Infinet

Driver to the Andover Infinet network:

1. Disconnect the Andover Infinet network field

bus from the Andover CX Network Controller.

2. Connect the Andover Infinet network field bus

to the FLN1 of the RS-485 Expansion Module

on the Andover Driver per the diagram in Figure

Figure 1. Connecting the Andover Infinet Driver to the Andover Infinet Network.

The installation is now complete.

Dieses Handbuch passt für folgende Modelle

Andere Siemens Gleichstromantrieb Handbücher

Siemens

Siemens MICROMASTER 420 Bedienungsanleitung

Siemens

Siemens SINAMICS SL150 Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens MXL Bedienungsanleitung

Siemens

Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Bedienungsanleitung

Siemens

Siemens SINAMICS GM150 Betriebsanleitung

Siemens

Siemens SINAMICS S120 Stücklistenhandbuch

Siemens

Siemens 3VA9 Series Bedienungsanleitung

Siemens

Siemens BT300 LonWorks Bedienungsanleitung

Siemens

Siemens SINAMICS GL150 Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens SINAMICS SM150 Bedienungsanleitung

Siemens

Siemens SIDOOR AT40 Benutzerhandbuch

Siemens

Siemens SINUMERIK 840D sl Stücklistenhandbuch

Siemens

Siemens SINAMICS S120 Stücklistenhandbuch

Siemens

Siemens COMBIMASTER 411 Bedienungsanleitung

Siemens

Siemens SIDOOR ATD400K Bedienungsanleitung

Siemens

Siemens SIDOOR AT12 Bedienungsanleitung

Siemens

Siemens 6SL3845-7NN46-7AA2 Betriebsanleitung

Siemens

Siemens MICROMASTER 440 GX Technische Daten

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens SINAMICS GM150 Bedienungsanleitung

Siemens

Siemens SINAMICS S120 Bedienungsanleitung

Siemens

Siemens SINAMICS GL150 Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch

Lenze

Lenze 8200 vector Bedienungsanleitung

Danfoss

Danfoss VLT DriveMotor FCP 106 Leitfaden

Danfoss

Danfoss VLT AQUA Drive FC 202 Bedienungsanleitung