Installation and Operations Manual | SICHARGE UC UL Plug-in Dispenser
Legal information
Warning notice system
This manual contains notices you must observe in order to ensure your personal safety as well as prevent damage to property. The
notices referring to your personal safety are highlighted in the manual by a safety alert symbol, while notices referring only to
property damage have no safety alert symbol. The notices shown below are graded according to the degree of danger.
DANGER
This indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
This indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
This indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
This indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice
warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance
with the relevant documentation; in particular, its warning notices and safety instructions. Qualified personnel are those who, based
on their training and experience, can identify risks and avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation, and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be
trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance
cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed
regularly and any necessary corrections are included in subsequent editions.
