Siemens Sinteso Cerberus PRO FDA241 Bedienungsanleitung

Building Technologies

Control Products and Systems

FDA241 / FDA221 SintesoTM

Cerberus™ PRO

Siemens ASD

lPatented Technology

lCompatible with the Siemens FDnet/C-NET loops (requires FDCC221S option)

lAdvanced dual Wavelength optical detection (Blue & Infra-red)

lConfigurable as a Standalone via a USB port or via the Panel when on a

network loop using the optional FDCC221S

lOut-of-the-box installation and commissioning

lEarly detection of a wide range of airborne particle sizes

lAsyst software tool for sample pipe designs support

lProgrammable alarm thresholds

lThe unique chamber design ensures clean detection chamber optics

lInstant recognition front panel display

lNormalize Smoke

lNormalize Air flow

lEasy field service accessibility

lMultiple event logging

lOffline/online configuration capability

lFDA241 Up to 800 m2coverage

lFDA221 Up to 500 m2coverage

l4…20 mA output

lPurge functionality (FDA241)

Building Technologies

Fire Safety

Siemens ASD FDA Series

The FDA241/221 series of detectors are a very early warning dual wavelength

(blue & infra-red) smoke detectors designed to protect small to medium, business-

critical environments up to 800 m2with the FDA241 or 500 m2with the FDA221).

The detector works by continually drawing air into sampling holes in a pipe net-

work. The air is passed into a uniquely designed detection chamber where light

scattering technology detects the presence of very small amounts of smoke.

Lower installation and service support costs

The FDA241 and FDA221 detectors can communicate directly on the

FDnet/C-NET loops (with an optional FDCC221S PCB), so there is no need for

separate relay or network connections. This reduces the cost of installation and

service. The detector acquires its loop address automatically.

Fire control panel programming (requires FDCC221S option)

The sophisticated integration on FDnet/C-NET allows for detector configurations,

maintenance and alarm/fault management to be performed centrally – at the fire

control panel. This increases control and lowers total solution cost.

Out-of-the-box operation

The FDA241 and FDA221 can be installed and commissioned out-of-the-box.

Normalize smoke density and air flow functionality, suitable default alarm and fault

thresholds makes for an easy installation.

Display

The front panel display includes an easy to read smoke

density and airflow level bar graph, alarm, fault status and

dust indicator (FDA241 only).

When the field service access cover is open, the user has

access to the Reset, Normalize Smoke & Flow buttons and

a mini USB communication connector.

Building Technologies

Fire Safety

Legend to Indicators

Opening the detector

There are 2 modes for accessing the detector service area.

Partial access

Remove the 2 screws on the top of the detector. Slide the front cover upward until it

reaches the self locking tabs.

Full access

Remove the 2 screws on the top of the detector. Slide the front cover upward until it

reaches the self locking tabs. Grasp the cover on the sides and gently apply pres-

sure to spread the cover sides outward. This will enable the cover to be totally re-

moved

Warning: Take notice of the front panel connecting cable if fully removing the

cover.

Service Access – Display LEDs and Buttons

Flow OK

If self check is OK the Flow OK LED starts flashing to indicate normal operation

Smoke OK

If self check is OK the Smoke OK LED starts flashing to indicate normal operation

Alarm

The Alarm LED flashes in the event of a smoke alarm

Normalize flow button

As each installation will require a different sampling pipe configuration, this function

is used to set the zero reference for the bargraph. This function is required to be

done during commissioning of the detector. The nominal flow value which is deter-

mined during the normalize flow period is then the zero set point value for the air-

flow monitoring during normal operation.

To use this function, use a thin tool such as a paper clip or a small jeweller’s

screwdriver, place the tool into the hole and push the normalize flow button.

During the Normalization period the detector is still actively monitoring for smoke

using the default values.

Building Technologies

Fire Safety

Normalize smoke button

This function is used to determine the nominal clean air value for the detector. This

is required to be done during commissioning. The nominal value which is deter-

mined during the normalize period is then the set point value for the smoke monitor-

ing during normal operation.

To use this function, use a thin tool such as a paper clip or jeweller’s screwdriver,

place the tool into the hole and push the normalize smoke button.

This function could be manually stopped by pressing the Normalize button again.

During the Normalization period the detector is still actively monitoring for smoke

using the default values.

Note:

The detector indicates over FDnet/C-NET) that normalizing is active (no distinguish-

ing between smoke and air flow)

Reset:

Pressing the Reset button, resets all latched states of the detector. Latched states

can be fire alarms or airflow out-of-range events. If a fire alarm is reset the associ-

ated relay is also reset.

Note:

If the detector is connected to FDnet, the alarms and associated relays are set to

non-latching

USB Connector:

The mini USB connector is used connect to a laptop when required to re-configure

the detector using the ASD Configuration Tool F-FXS2051

LED Test Function:

Press and hold the “Buzzer silence button” for 5 seconds.

The detector will cycle through a full LED display to check the operation of all LEDS

If connecting the Siemens ASD directly to a Siemens FDnet, C-NET loop, the FDCC221S communication card must

be ordered as a separate item. (S24218-A201-A2)

Building Technologies

Fire Safety

Technical data

FDA241 FDA221

Input power

Voltage DC 19-30V √ √

Current @ DC 24 V 150 mA nominal,

250 mA in Alarm √ √

Dimensions (W x H x D) 162 mm x 285 mm x 120 mm √ √

Weight approx. 1.5 kg ( 3.3 Ibs) √ √

Protection category IP30 √ √

Mounting upright, inverted √ √

Sound power level L

[dBA]

At suction speed High 37 33

Medium 33 30

Low 30 26

Operating conditions

Detector ambient -20 to 60 °C √ √

Humidity 5 to 95% (no condensation) √ √

Dust Indicator √

Sampling network

Maximum pipe lengths Single pipe length

Branched pipe lengths 60 m

2x60 m 30 m

2x25 m

Sampling hole options In accordance to the Asyst tool used for sample pipe modeling

Air inlet/exhaust pipe Metric: 25 mm Outside diameter (OD), Imperial 1.05 inches (US pipe)

Area coverage depending on local codes

and standards Up to 800 m² Up to 500 m²

System compatibility compatible with all Siemens FC20/FC720 (FS20/FS720 system)

Alarm Relay outputs

selectable Latching/Non Latching

rated 2.0A @ DC 30 V (max). NO/NC Contacts Qty 4 Qty 3

Fault Relays Qty 1 Qty 1

Cable access Rear 10 cm x 2.5 cm or top entry

Cable termination Screw terminals 0.2…2.5 mm

(30–12 AWG)

Other Interfaces Power in/out, 4-20 mA

Alarm threshold parameter sets

Fire 1 10 sets

0.05…2.0 % obs/m 5 sets

0.20…2.0 % obs/m

Fire 2 10 sets

2.0…20 % obs/m 5 sets

6.0…20 % obs/m

Individual alarm delays 0…300 seconds: Standard value 0 seconds smoke density, 15 sec Flow fault

Front Display

l4 Alarm state indicators (FDA241)

l3 Alarm state indicators (FDA221)

lFault Indicators

lPurge (FDA241)

lDust (FDA241)

lSmoke and Airflow level Bargraphs

Service Area

lStatus OK LEDs

lUSB connector

lReset

lSmoke and Airflow Normalize buttons

1A-weighted sound power level in [dB] as per DIN EN ISO 3744-2009

Measured with a pipe piece at the air inlet and at the air outlet

Issued by

Siemens Switzerland Ltd

Building Technologies Division

International Headquarters

Gubelstrasse 22

CH-6301 Zug

Tel. +41 41 724 24 24

www.siemens.com/buildingtechnologies

Technical specifications and availability subject to change without notice.

Document no. A6V10331032_g_en_-- Manual FD20/FD720

Edition 2016-04-20 Register 3

Event log Time and date stamped in separate, non-volatile, logs for: smoke level, flow

level, detector status and faults

Normalize smoke & air flow

Set acceptable smoke alarm and fault thresholds

lUser adjustable period for airflow and smoke

lDuring Normalize period, pre-set default values are maintained

Warranty period

2 Years

Approvals

–VdS FDA241

G213050 FDA221

G213050

Details for ordering

Type Part no Designation Weight

FDA241 S54333-F17-A1 Aspirating smoke detector (8H) 2.500 kg

FDA221 S54333-F15-A1 Aspirating smoke detector (5S) 2.500 kg

Accessories FDCC221S S24218-A201-A2 Communications interface 0.019 kg

FP120-Z1 S54400-S122-A1 Power supply kit A (70 W) 3,920 kg

FA2003-A1 A5Q00019353 Battery (12 V, 7 Ah, VdS) 2,450 kg

FA2004-A1 A5Q00019354 Battery (12 V, 12 Ah, VdS) 3,930 kg

FA2005-A1 A5Q00019677 Battery (12 V, 17 Ah, VdS) 5,640 kg

You will find additional information in the following documents:

- Technical manual for Aspirating Smoke Detectors FDA241, FDA221,

Document A6V10334410

- Technical manual for Power supply kit FP120-Z1,

Document A6V10393194

Dieses Handbuch passt für folgende Modelle

Andere Siemens Gaswarngerät Handbücher

Siemens

Siemens FDA241 Bedienungsanleitung

Siemens

Siemens CC62P Bedienungsanleitung

Siemens

Siemens INTELLIGAS LYA14 Series Bedienungsanleitung

Siemens

Siemens OOHC941 Bedienungsanleitung

Siemens

Siemens 5TG5930-3 Series Bedienungsanleitung

Siemens

Siemens QRB1 Series Bedienungsanleitung

Siemens

Siemens Water Technologies Series Bedienungsanleitung

Beliebte Gaswarngerät Handbücher anderer Marken

Macurco

Macurco GD-6 Bedienungsanleitung

Evikon

Evikon E2632 Bedienungsanleitung

Critical Environment Technologies

Critical Environment Technologies CGAS-A Series Bedienungsanleitung

MSA

MSA altair 5 Bedienungsanleitung

DOD Technologies

DOD Technologies ChemLogic CL96 Bedienungsanleitung

DEGA

DEGA NS III LCD Series Bedienungsanleitung

RKI Instruments

RKI Instruments 35-3001A-08-01 Bedienungsanleitung

Sygonix

Sygonix 2483186 Bedienungsanleitung

Perry

Perry 1GA 50917MET/P Bedienungsanleitung

isweek

isweek AS8900 Bedienungsanleitung

Oldham

Oldham OLC 10 Bedienungsanleitung

Wizmart

Wizmart NB983 Bedienungsanleitung

Beacon

Beacon MEGA Handbuch

RKI

RKI GX-6000 Bedienungsanleitung

Dräger

Dräger PIR 7000 Bedienungsanleitung

GDS

GDS GASMAX EC Bedienungsanleitung

Seitron

Seitron BE COOL R1 Bedienungsanleitung

MSA

MSA ULTIMA X5000 Bedienungsanleitung