Siemens DESIGO RXC Bedienungsanleitung
CM2N1661en_02
23 Sep 2011 Building Technologies
s
1661
1661P01, 1661P02
DESIGO™ RXC
Gateway
EnOcean/LonWorks
RXZ95.1/LON
For use with:
– DESIGO RXC
– Devices / systems with LONWORKS® communication
Wireless receiver with LONWORKS® interface FTT10A
Evaluation of up to 9 EnOcean room units
Operating voltage AC / DC 24 V
2 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Use 23 Sep 2011
Use
With the RXC room controllers, wireless room units can be used in place of the
QAX3x standard room units. One of the wireless technologies used is EnOcean.
Here, the room unit is powered by a solar cell. A battery is only needed If light
conditions are poor.
The gateway requires a separate AC / DC 24 V supply
(not in the scope of delivery).
Integration ot the EnOcean room units (QAX9x.x) into the system is made via the
RXZ95.1/LON EnOcean/LONWORKS gateway. It handles up to 9 EnOcean room
units. The telegrams received via radio are converted to LONWORKS standard
network variables (SNVT).
Type summary
Product number Stock number Designation
RXZ95.1/LON S55842-Z100 Gateway EnOcean/LONWORKS
An external antenna is included in the delivery.
Ordering
When ordering, please give quantity, designation, product number and stock number.
When ordering, please give, Product number and Stock number.
Example:
10 Gateways EnOcean/LONWORKS, RXZ95.1/LON, S55842-Z100
Equipment combinations
Product number Stock number Designation
QAX95.1 S55623-H100 Wireless and battery-less room unit with
EnOcean interface (temperature sensor)
QAX96.1 S55623-H101 Wireless and battery-less room unit with
EnOcean interface (temperature sensor
with setpoint adjuster)
QAX95.4 S55623-H104 Wireless and battery-less room unit with
EnOcean interface (temperature sensor)
QAX96.4 S55623-H105 Wireless and battery-less room unit with
EnOcean interface (temperature sensor
with setpoint adjuster)
QAX97.4 S55623-H106 Wireless and battery-less room unit with
EnOcean interface (temperature sensor
with setpoint adjuster, freely programmable
button and 2-stage switch)
QAX98.4 S55623-H108 Wireless and battery-less room unit with
EnOcean interface (temperature sensor
with setpoint adjuster, freely programmable
button and 5-stage switch)
The RXZ95.1/LON can be used in all systems with LONWORKS communication
EnOcean room units
Note
3 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Topology 23 Sep 2011
Topology
Integration
Desigo Insight
RXC RXC RXC
PXX-L.. PXC00...D
Room unit 1
Temperature, setpoint
Room unit 2
Temperature
Room unit 3
Temperature, setpoint,
fan speed, presence
Total max.
9 room units
Integration of EnOcean room units into DESIGO RXC
Mechanical design
LED "Power"
LED "EnOcean-
communications"
Bus A
Bus B
Gnd
24 V
1661Z07
Screw terminals
Service pin
Service LED
for commissioning
Connector for antenna
4 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies System requirements 23 Sep 2011
System requirements
SRC04-FTT plug-in (template: Thermokon srcn_9_1_02)
Functions:
Monitoring and configuration gateway / room units
For use with RXT10 tool or standard LNS tool
The device resource files contain information about supplier-specific configuration
parameters and network variables (UNVTs and UCTPs).
Prerequisite for installation is LONMARK® resource files version 13.00 or,
alternatively, LonMARK resource file API version 2.3 (bothersome installation).
srcn_9_1_02.APB; .NXE; .XFB; .XIF; .PDF (if SRC-FTT plug-in is not used)
LNS plug-in, device resource files, LONWORKS application:
Download from the DESIGO RX intranet:https://intranet10.sbt.siemens.com/
https://intra.industry.siemens.com/bt/global/en/business/building_comfort/systems/
desigo/ra/Pages/des-ra-units.aspx?TabcardNo=6
LONMARK resource files version 13.00:
Download from http://www.lonmark.org/technical_resources/resource_files/
Environment for engineering tool
Integration of QAX95.x/QAX96.x: The RXT10 tool or a standard LNS tool can be
used.
Integration of QAX97.x/QAX98.x: A standard LNS tool must be used.
Limitations
With a DESIGO system, it is not possible to integrate additional EnOcean
products, such as buttons, presence detectors, etc., via the RXZ95.1/LON
gateway with the RXT10 tool.
Reason: In the gateway, temperature and setpoint adjustment are
available as static network variables. However, additional
functions are configured dynamically, and the RXT10 does not
support dynamic network interfaces.
RXT10 does not support the multifunctional button of the QAX97.4 und QAX98.4
room units.
For technological reasons, the control performance of an RXC… room controller
in connection with an EnOcean room unit is inferior to that with a standard
QAX3x room unit
Software LNS PlugIn
Device resource files:
Thermokon_DRF22.exe
LONWORKS application
Software source /
documentation
5 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and LNS plug-in 23 Sep 2011
Workflow with RXT10 and LNS plug-in
Basis: PC with DESIGO infrastructure
RXT10 version 4 or higher
Note: The following components must be installed in the order indicated.
Step 1: Installation of LONMARK resource files version 13.00 or higher
Source: http://www.lonmark.org/technical_resources/resource_files/
Step 2: Installation of device resource files:
Source: Download from the DESIGO RX intranet:
https://intra.industry.siemens.com/bt/global/en/business/building_comfort/systems/
desigo/ra/Pages/des-ra-units.aspx?TabcardNo=6
Step 3: Installation of SRC04-FTT plug-in
Source: Download from the DESIGO RX intranet:
https://intra.industry.siemens.com/bt/global/en/business/building_comfort/systems/
desigo/ra/Pages/des-ra-units.aspx?TabcardNo=6
Set up the gateway with the RXT10 tool by following the standard procedure for
integration of third-party devices (for details, refer to User Manual RXT10,
CM110669).
Step Procedure
1 Device > Add
Select tab Device Type.
From menu Device Type, select PLG: Plug In Support.
On the "Device" list, highlight PlugInDevice.
2 Select tab Overview and enter the location.
Confirm by clicking OK.
Infrastructure
Engineering with
RXT10 and
LNS plug-in
6 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and LNS plug-in 23 Sep 2011
Step Procedure
3 RXT: Select <no networkinterface>
Network > Connect (Attached offnet)
4 Device > Configure > Thermokon_SRC-FTT > OK
Confirm message by selecting YES.
Select function “Thermokon SRC-FTT“ > Click OK.
Confirm message by selecting YES.
7 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and LNS plug-in 23 Sep 2011
Step Procedure
5a Configure the gateway:
Select tab General settings:
Function not available with the RXT10
Receive time: For monitoring the RF link to the room unit
(optional)
Sending interval: Recommendation: Same as RXC Default
2700 [s] (45 min)
5b Configure the gateway:
select tab Switch settings:
Functions not available with the RXT10
8 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and LNS plug-in 23 Sep 2011
Step Procedure
5c Configure the gateway:
select tab Sensor 1...9:
Function not available with the RXT10.
Device: For room units QAX95.1, QAX96.1, select
setting 7
SensorID: For offline engineering, the EnOcean ID of
the room unit can be entered here, if desired.
Normally, it is learned-in online (with
connection to the network, see step 10).
SCPTmaxSendTime: Heartbeat room unit
Recommendation: Same as RXC Default
2700 [s] (45 min)
Note relating to SCPTmaxSendTime:
With the default setting of 0.0 s (OFF) and in the event the RF link
breaks down (faults, no light, etc.), the temperature value in the RXC
will change to ”invalid” when the heartbeat has elapsed. When using a
setting greater than 0.0 s, the temperature value received last will be
transmitted.
6 > Apply
(Question ”...transmit to device?“: Answer with YES)
Network >Disconnect (Attached offnet)
7 Make RXT10 bindings:
Datapoint Gateway RXC
Room Temperature: nvoHVACTemp_x nviSpaceTemp
Setpoint Offnet: nvoSetpoint_x nviSetpointOffset
8 Network > Connect (online)
9 Assign devices and install
9 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and LNS plug-in 23 Sep 2011
Step Procedure
10 Learn-in the room units:
Open Plug-in (Device > Configure > Thermokon SRC-FTT > OK >
YES
Click button next to SensorID
> Learn-in > Press button on the room unit
11 Function check gateway / room unit:
10 / 20
Siemens RXZ95.1/LON – Gateway EnOcean/LonWorks CM2N1661en_02
Building Technologies Workflow with RXT10 and SBT generic plug-in 23 Sep 2011
Workflow with RXT10 and SBT generic plug-in
Basis: PC with DESIGO infrastructure
RXT10 version 4 or higher
Step: Download:
EasySens_Empfaenger_Receiver_SRC04FTT_SRC65FTT_160108_156.zip
Extract and save LON application:
srcn_9_1_01 (.apb; .nxe; .xfb; .xif) / optional: srcn_12_1_01
Source: Download from the DESIGO RX intranet:https://intranet10.sbt.siemens.com/
business/building_comfort/systems/desigo/ra/_des_ra_qax/_des_ra_qax95.htm
Set up the gateway with the RXT10 tool by following the standard procedure for
integration of third-party devices (for details, refer to User Manual RXT10,
CM110669).
Step Procedure
1 Device > Add
Select tab Device Type.
From selection menu Device Type, select PLG: Plug In Support.
On the "Device" list, highlight PlugInDevice.
2 Select tab Overview to enter the location. Confirm by clicking OK.
3 RXT: Select <no networkinterface>
Network > Connect (Attached offnet)
Infrastructure
Engineering with
RXT10 and XIF-Import
Dieses Handbuch passt für folgende Modelle
1
Andere Siemens Tor Handbücher
Siemens
Siemens MindConnect Nano Bedienungsanleitung
Siemens
Siemens SIMATIC FDE Technisches Dokument
Siemens
Siemens RUGGEDCOM WIN5137-V Bedienungsanleitung
Siemens
Siemens A53457 Wartungs- und Serviceanleitung
Siemens
Siemens SIMATIC IOT Gateway MQTT Benutzerhandbuch
Siemens
Siemens SIMATIC IOT2050 Bedienungsanleitung
Siemens
Siemens SIMATIC TI500 Bedienungsanleitung
Siemens
Siemens SpeedStream 6500 Series Bedienungsanleitung
Siemens
Siemens SIMATIC FDE Gateway V1.1 Technisches Dokument
Siemens
Siemens SIMATIC NET IE/WSN-PA Link Administratorhandbuch
Siemens
Siemens 5WG1143-1AB01 Bedienungsanleitung
Siemens
Siemens RUGGEDCOM WIN5151 Bedienungsanleitung
Siemens
Siemens IE/PB LINK PN IO Bedienungsanleitung
Siemens
Siemens SIMATIC RTLS Series Anwendungshandbuch
Siemens
Siemens FDCW241 Bedienungsanleitung
Siemens
Siemens OCT200.KNBA Bedienungsanleitung
Siemens
Siemens SIMATIC RTLS Series Anwendungshandbuch
Siemens
Siemens SIMATIC NET S7-CPs Bedienungsanleitung
Siemens
Siemens GAMMA 5WG1 143-1AB01 Service-Handbuch
Siemens
Siemens FDCW241 Bedienungsanleitung
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
