Siemens ConnexxLink Bedienungsanleitung

ConnexxLink

Wireless Programming System

User Guide

WL_Programmer_en.indb 1WL_Programmer_en.indb 1 29.04.2008 09:17:0029.04.2008 09:17:00

ConnexxLink is a wireless programming system for all

hearing instruments equipped with e2e wireless 2.0.

Place ConnexxLink around your patient's neck and wire-

lessly connect your patient's hearing instruments to

the programming software on the PC. No programming

cables are necessary.

Follow these instructions to set up ConnexxLink and to

understand how ConnexxLink works.

For instructions on programming a hearing instrument

please refer to the specific Fitting Guide.

Introduction

ConnexxLink wireless programming system 4

Intended use 5

General notes on safety 6

Safety notes for batteries 8

Handling the rechargeable battery 9

Before first us

- e

Charging the wireless programming syste

- m

Running time of the rechargable batter

- y

Working with the wireless programming system 10

Before first us

- e

Bluetooth dongl

- e

Wearing the wireless programming syste

- m

Connecting wireless programming system

and Bluetooth dongle

Screens and symbols 12

Maintenance and care 13

Technical information 14

Disposal information 16

Contents

Features

1ConnexxLink

2On/Off button

3Lanyard

4USB Bluetooth Dongle

5Rechargeable battery

6Power supply and adapters

ConnexxLink wireless programming system

The ConnexxLink wireless programming system is intend-

ed to program hearing instruments wirelessly.

Read and follow the instructions of this user guide to

avoid injuries or damage to the wireless programming

system.

Symbols:

Be aware of information marked with the warning symbol

WARNING, CAUTION or NOTICE!

WARNING points out a situation that could lead

to serious injuries.

CAUTION indicates a situation that could lead to

minor and moderate injuries.

NOTICE NOTICE indicates possible property

damage.

Advice and tips on how to handle your

hearing instrument better.

Instruction. Indicates that something has to be

done.

Intended use 4

NOTICE

The wireless programming system is sensitive to extreme

heat, high humidity, strong magnetic fields (> 0.1T), X-

rays and mechanical stress.

Do not expose the wireless programming system to ex-

treme temperature or high humidity.

Do not leave it in direct sunlight.

Do not immerse it in water.X

CAUTION

The wireless programming system is a Bluetooth class 2

device. It may interfere with measuring devices and elec-

tronic equipment.

Turn the wireless programming system off when in

airplanes.

Observe restrictions for the use in hospitals.

Prior to use in conjunction with an electronic implantX

or life supporting system have the electromagnetic

compatibility verified.

5General notes on safety

In some countries restrictions for the usage of wireless

equipment exist.

Refer to local authorities for further information.

General notes on safety

WARNING

Risk in explosive environments, e.g. mining areas!

Don't use the wireless programming system in areas

where there is a danger of explosions.

WARNING

Risk of interference with cardiac pacemakers.

Do not use the wireless programming system if the pa-

tient is fitted with a cardiac pacemaker.

The function of the wireless link might be affected by

a nearby electro-magnetic noise source, such as com-

puter monitors.

Please keep an appropriate distance from these

sources.

WARNING

Strangulation hazard when lanyard gets entangled in

e.g. moving mechanical parts of machines.

Use only the delivered breakaway lanyard. It will

automatically snap when it gets entangled.

Do not throw old rechargeable batteries into house-X

hold trash.

Dispose of them according to national regulations.

To avoid short circuits cover the contacts of the re-X

chargeable Li-ion batteries with tape.

WARNING

Choking hazard posed by small parts.

Keep batteries, small parts and the wireless program-

ming system out of children‘s reach.

If swallowed consult a physician or hospital immedi-

ately.

Safety notes for batteries

WARNING

Risk of explosion when the rechargeable battery is

handled incorrectly.

Do not short circuit, pierce, crush or disassemble the

rechargeable battery.

Do not place in oven or fire.

Do not immerse in water.X

Charge the rechargeable battery between 0ºC and 45ºCX

Remove the rechargeable battery when the instru-X

ment is not in use for a prolonged period of time.

Before first use

Insert the rechargeable battery into the wireless pro-X

gramming system.

Charge the rechargeable battery before first use.X

Charging the wireless programming system

Connect the wireless programming systemX

with the power plug to a power supply.

The charging process starts. Charging time

is about 5 hours depending on the status of

the rechargeable battery.

Charging is complete when the battery sym-

bol shows a full battery.

Handling the rechargeable battery

Running time of the rechargable battery

The running time of the rechargable battery is about 6 to

7 hours.

Use the wireless programming system during the day

and charge it over night.

Keep an eye on the battery status when using theX

wireless programming system.

Charge the wireless programming system when the

battery is turning low.

Before first use

Make sure to have Connexx 6.0 or a higher version in-X

stalled.

Plug the Bluetooth dongle into a USB slot of your com-X

puter.

Bluetooth dongle

Bluetooth dongle and wireless programming

system need to be within a range of 10m (32 ft).

The green LED of the Bluetooth dongle blinks when the



Bluetooth dongle is searching for a connection to the

wireless programming system.

The green LED of the Bluetooth dongle is constantly lit



when a connection to the wireless programming system

is established.

Wearing the wireless programming system

The patient wears the hearing instruments while

the hearing instruments are programmed.

Use the lanyard to put the wireless program-

ming system around the patients neck.

This way the wireless programming system

has a distance up to 25cm (10 in) to the hea-

ring instruments.

The patient should maintain a forward facing

head position, same direction as the wireless

programming system. Turning the head can

lead to a disconnection during the program-

ming process.

8Working with the wireless programming system

Andere Handbücher für ConnexxLink

Inhaltsverzeichnis

Andere Siemens Hörgerät Handbücher

Siemens

Siemens Pure 500 CIC Bedienungsanleitung

Siemens

Siemens Intuis 2 SP Bedienungsanleitung

Siemens

Siemens ePocket Bedienungsanleitung

Siemens

Siemens Octiv Custom+ Bedienungsanleitung

Siemens

Siemens Acuris Bedienungsanleitung

Siemens

Siemens Life 500 BTE Bedienungsanleitung

Siemens

Siemens Triano Bedienungsanleitung

Siemens

Siemens Vibe Bedienungsanleitung

Siemens

Siemens INTUIS Bedienungsanleitung

Siemens

Siemens Life 300 BTE Bedienungsanleitung

Siemens

Siemens IMPACT ITE Bedienungsanleitung

Siemens

Siemens Octiv R+ Bedienungsanleitung

Siemens

Siemens Impact M Bedienungsanleitung

Siemens

Siemens Pure Bedienungsanleitung

Siemens

Siemens IT Bedienungsanleitung

Siemens

Siemens Pure Binax Bedienungsanleitung

Siemens

Siemens ConnexxLink Bedienungsanleitung

Siemens

Siemens ARTIS 2 P Bedienungsanleitung

Siemens

Siemens Ace binax Bedienungsanleitung

Siemens

Siemens Cellion primax Bedienungsanleitung

Siemens

Siemens easyTek Bedienungsanleitung

Siemens

Siemens miniTek Bedienungsanleitung

Siemens

Siemens Pure 700 CIC Bedienungsanleitung

Siemens

Siemens RIC Bedienungsanleitung

Beliebte Hörgerät Handbücher anderer Marken

Sonic

Sonic Bliss miniBTE Bedienungsanleitung

Lexie

Lexie B1 Stücklistenhandbuch

Widex

Widex FM+DEX Bedienungsanleitung

Camplicomms

Camplicomms HC-200 Bedienungsanleitung

Phonak

Phonak Q90 Bedienungsanleitung

Williams Sound

Williams Sound SoundPlus WIR 237 Leitfaden

Oticon Medical

Oticon Medical Ponto SoundConnector Bedienungsanleitung

Starkey

Starkey Destiny Bedienungsanleitung

Audicus

Audicus The Icon Bedienungsanleitung

Advanced Bionics

Advanced Bionics Slim HP Standard Bedienungsanleitung

Widex

Widex DREAM440 THE DREAM SERIES Bedienungsanleitung

Phonak

Phonak myPilot Bedienungsanleitung

NIKEN

NIKEN NK-401 Bedienungsanleitung

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Bedienungsanleitung

Sonetik

Sonetik GOHEAR Bedienungsanleitung

Widex

Widex FL-9 Bedienungsanleitung

Panasonic

Panasonic WH-216KZ Montageanleitung

Geemarc

Geemarc CL Bluehook Bedienungsanleitung