Siemens CPU 1513-1 PN Technisches Dokument

EQUIPMENT MANUAL

Edition

CPU 1513-1 PN

SIMATIC

S7-1500

11/2022

support.industry.siemens.com

6ES7513-1AM03-0AB0

Introduction 1

Safety instructions 2

Product overview 3

Connecting up 4

Interrupts, error messages,

diagnostics and system

alarms 5

Technical specifications 6

Dimensional drawing A

SIMATIC

S7-1500

CPU 1513-1 PN

(6ES7513-1AM03-0AB0)

Equipment Manual

11/2022

A5E40881673-AC

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E40881673-AC

Ⓟ 10/2022 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of SiemensAG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

1 Introduction........................................................................................................................................ 5

1.1 Guide documentation S7-1500/ET 200MP......................................................................... 6

1.1.1 Information classes S7-1500/ET 200MP............................................................................. 6

1.1.2 SIMATIC Technical Documentation.................................................................................... 7

2 Safety instructions.............................................................................................................................. 10

2.1 Security information......................................................................................................... 10

3 Product overview................................................................................................................................ 11

3.1 New functions.................................................................................................................. 11

3.2 Application....................................................................................................................... 12

3.3 Hardware properties......................................................................................................... 19

3.4 Firmware functions........................................................................................................... 21

3.5 Operating and display elements........................................................................................ 25

3.5.1 Front view of the CPU with closed front panel................................................................... 25

3.5.2 Front view of the CPU without front panel and view from below........................................ 27

3.5.3 Rear view of the CPU......................................................................................................... 28

3.6 Operating mode buttons................................................................................................... 29

4 Connecting up.................................................................................................................................... 30

5 Interrupts, error messages, diagnostics and system alarms.............................................................. 34

5.1 Status and error display of the CPU.................................................................................... 34

6 Technical specifications...................................................................................................................... 38

A Dimensional drawing.......................................................................................................................... 50

CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

Table of contents

Introduction 1

Purpose of the documentation

This manual supplements the system manual of the S7-1500 automation system/ET200MP

distributed I/O system as well as the function manuals. This manual contains a description of

the module-specific information. The system-related functions are described in the system

manual. All system-spanning functions are described in the function manuals.

The information provided in this equipment manual and the system manual enables you to

commission the CPU.

Conventions

STEP7: In this documentation, "STEP7" is used as a synonym for all versions of the

configuration and programming software "STEP7 (TIAPortal)".

Please also observe notes marked as follows:

NOTE

A note contains important information on the product described in the documentation, on

the handling of the product or on the section of the documentation to which particular

attention should be paid.

Recycling and disposal

For environmentally friendly recycling and disposal of your old equipment, contact a certified

electronic waste disposal company and dispose of the equipment according to the applicable

regulations in your country.

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

You can find catalogs for all automation and drive products on the Internet

(https://mall.industry.siemens.com).

CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

1.1 Guide documentation S7-1500/ET 200MP

1.1.1 Information classes S7-1500/ET 200MP

The documentation for the SIMATIC S7-1500 automation system and the ET200MP

distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require. Changes and

supplements to the manuals are documented in a Product Information.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC S7-1500 and ET200MP systems.

The STEP7 online help supports you in the configuration and programming.

Examples:

•Getting Started S7-1500

•S7-1500/ET 200MP System Manual

•Online help TIA Portal

Device information

Equipment manuals contain a compact description of the module-specific information, such

as properties, wiring diagrams, characteristics and technical specifications.

Examples:

•Equipment Manuals CPUs

•Equipment Manuals Interface Modules

•Equipment Manuals Digital Modules

•Equipment Manuals Analog Modules

•Equipment Manuals Communications Modules

•Equipment Manuals Technology Modules

•Equipment Manuals Power Supply Modules

6CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

Introduction

1.1 Guide documentation S7-1500/ET 200MP

General information

The function manuals contain detailed descriptions on general topics relating to the SIMATIC

S7-1500 and ET200MPsystems.

Examples:

•Function Manual Diagnostics

•Function Manual Communication

•Function Manual Motion Control

•Function Manual Web Server

•Function Manual Cycle and Response Times

•PROFINET Function Manual

•PROFIBUS Function Manual

Product Information

Changes and supplements to the manuals are documented in a Product Information. The

Product Information takes precedence over the device and system manuals.

You can find the latest Product Information on the S7-1500 and ET200MP systems on the

Internet (https://support.industry.siemens.com/cs/de/en/view/68052815).

Manual Collection S7-1500/ET200MP

The Manual Collection contains the complete documentation on the SIMATIC S7‑1500

automation system and the ET200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet.

(https://support.industry.siemens.com/cs/ww/en/view/86140384)

SIMATIC S7-1500 comparison list for programming languages

The comparison list contains an overview of which instructions and functions you can use for

which controller families.

You can find the comparison list on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86630375).

1.1.2 SIMATIC Technical Documentation

Additional SIMATIC documents will complete your information. You can find these

documents and their use at the following links and QR codes.

The Industry Online Support gives you the option to get information on all topics. Application

examples support you in solving your automation tasks.

Introduction

1.1 Guide documentation S7-1500/ET 200MP

CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

Overview of the SIMATIC Technical Documentation

Here you will find an overview of the SIMATIC documentation available in Siemens Industry

Online Support:

Industry Online Support International

(https://support.industry.siemens.com/cs/ww/en/view/109742705)

Watch this short video to find out where you can find the overview directly in Siemens

Industry Online Support and how to use Siemens Industry Online Support on your mobile

device:

Quick introduction to the technical documentation of automation products per

video (https://support.industry.siemens.com/cs/us/en/view/109780491)

YouTube video: Siemens Automation Products - Technical Documentation at a

Glance (https://youtu.be/TwLSxxRQQsA)

mySupport

With "mySupport" you can get the most out of your Industry Online Support.

Registration You must register once to use the full functionality of "mySupport". After registra

tion, you can create filters, favorites and tabs in your personal workspace.

Support requests Your data is already filled out in support requests, and you can get an overview of

your current requests at any time.

Documentation In the Documentation area you can build your personal library.

Favorites You can use the "Add to mySupport favorites" to flag especially interesting or fre

quently needed content. Under "Favorites", you will find a list of your flagged

entries.

Recently viewed

articles

The most recently viewed pages in mySupport are available under "Recently viewed

articles".

CAx data The CAx data area gives you access to the latest product data for your CAx or CAe

system. You configure your own download package with a few clicks:

• Product images, 2D dimension drawings, 3D models, internal circuit diagrams,

EPLAN macro files

• Manuals, characteristics, operating manuals, certificates

• Product master data

You can find "mySupport" on the Internet. (https://support.industry.siemens.com/My/ww/en)

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

8CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

Introduction

1.1 Guide documentation S7-1500/ET 200MP

You can find the application examples on the Internet.

(https://support.industry.siemens.com/cs/ww/en/ps/ae)

Introduction

1.1 Guide documentation S7-1500/ET 200MP

CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

CPU 1513-1 PN (6ES7513-1AM03-0AB0)

Equipment Manual, 11/2022, A5E40881673-AC

Safety instructions 2

2.1 Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/cert).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Industrieanlagen Handbücher

Siemens

Siemens SIRIUS 3RT105/145 A/N Series Bedienungsanleitung

Siemens

Siemens SIMATIC NET RUGGEDCOM RX1500 Bedienungsanleitung

Siemens

Siemens 3VT9500-8CH30 Bedienungsanleitung

Siemens

Siemens SITRANS L Administratorhandbuch

Siemens

Siemens 3VL9100-4PA Series Bedienungsanleitung

Siemens

Siemens 1MB115 Handbuch

Siemens

Siemens LDS 6 Bedienungsanleitung

Siemens

Siemens 3VT9100-8LB00 Bedienungsanleitung

Siemens

Siemens SIPROTEC T103 Bedienungsanleitung

Siemens

Siemens SENTRON VL630 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Technisches Dokument

Siemens

Siemens 3VA9157-0HA 0 Series Bedienungsanleitung

Siemens

Siemens SIRIUS S00 Bedienungsanleitung

Siemens

Siemens FLENDER H SH Series Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Technisches Dokument

Siemens

Siemens S7-1200 PROFIBUS Bedienungsanleitung

Siemens

Siemens EBS SENTRON 3VM Bedienungsanleitung

Siemens

Siemens SIMATIC S7-400H Bedienungsanleitung

Siemens

Siemens Reyrolle 7SR5 Bedienungsanleitung

Siemens

Siemens 3VL9800-8BG00 Bedienungsanleitung

Siemens

Siemens 3VT9100-1U.00 Bedienungsanleitung

Siemens

Siemens SIMATIC NET S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC Compact FF Link Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Rioned

Rioned UrbanJet Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung