Siemens SIMATIC ET 200SP Technisches Dokument
EQUIPMENT MANUAL
Edition
CPU 1512SP-1 PN
SIMATIC
ET 200SP
11/2022
support.industry.siemens.com
6ES7512-1DM03-0AB0
Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E33591411-AE
Ⓟ 10/2022 Subject to change
Copyright © SiemensAG 2014 - 2022.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of SiemensAG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
4
1 Introduction........................................................................................................................................ 5
1.1 ET 200SP Documentation Guide........................................................................................ 6
1.1.1 Information classes ET 200SP............................................................................................ 6
1.1.2 SIMATIC Technical Documentation.................................................................................... 7
2 Safety instructions.............................................................................................................................. 10
2.1 Security information......................................................................................................... 10
3 Product overview................................................................................................................................ 11
3.1 New functions.................................................................................................................. 11
3.2 Hardware properties......................................................................................................... 12
3.3 Firmware functions........................................................................................................... 15
3.4 Operating and display elements........................................................................................ 19
3.4.1 Front view of the module with BusAdapter........................................................................ 19
3.5 Mode switch..................................................................................................................... 19
4 Wiring................................................................................................................................................. 21
5 Interrupts, error messages, diagnostics and system alarms.............................................................. 25
5.1 Status and error display of the CPU.................................................................................... 25
6 Technical specifications...................................................................................................................... 28
A Dimension drawing............................................................................................................................ 42
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
Table of contents
Introduction 1
Purpose of the documentation
This manual supplements the ET200SP distributed I/O system
(https://support.automation.siemens.com/WW/view/en/58649293) system manual as well as
the function manuals. This manual contains a description of the module-specific information.
The system-related functions are described in the system manual. All system-spanning
functions are described in the function manuals.
The information provided in this equipment manual and the system manual allows you to
commission the CPU.
Conventions
STEP7: In this documentation, "STEP7" is used as a synonym for all versions of the
configuration and programming software "STEP7 (TIAPortal)".
Please also observe the notes marked as follows:
NOTE
A note contains important information on the product described in the documentation, on
the handling of the product or on the section of the documentation to which particular
attention should be paid.
Recycling and disposal
For environmentally friendly recycling and disposal of your old equipment, contact a certified
electronic waste disposal company and dispose of the equipment according to the applicable
regulations in your country.
Industry Mall
The Industry Mall is the catalog and order system of Siemens AG for automation and drive
solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power
(TIP).
You can find catalogs for all automation and drive products on theInternet
(https://mall.industry.siemens.com).
5
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
1.1 ET 200SP Documentation Guide
1.1.1 Information classes ET 200SP
The documentation for the SIMATIC ET200SP distributed I/O system is arranged into three
areas.
This arrangement enables you to access the specific content you require.
You can download the documentation free of charge from the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109742709).
Basic information
The System Manual describes in detail the configuration, installation, wiring and
commissioning of the SIMATIC ET200SP distributed I/O system.
The STEP7 online help supports you in the configuration and programming.
Examples:
•ET200SP System Manual
•System Manual ET200SP HA/ET200SP modules for devices used in a hazardous area
•Online help TIA Portal
Device information
Equipment manuals contain a compact description of the module-specific information, such
as properties, wiring diagrams, characteristics and technical specifications.
Examples:
•Equipment Manuals CPUs
•Equipment Manuals Interface Modules
•Equipment Manuals Digital Modules
•Equipment Manuals Analog Modules
•Equipment Manuals Motor Starter
•BaseUnits Equipment Manuals
•Equipment Manual Server Module
•Equipment Manuals Communications Modules
•Equipment Manuals Technology Modules
6CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
Introduction
1.1 ET 200SP Documentation Guide
General information
The function manuals contain detailed descriptions on general topics relating to the SIMATIC
ET200SP distributed I/O system.
Examples:
•Function Manual ET200AL/ET200SP Mixed Configuration
•Function Manual Diagnostics
•Function Manual Communication
•PROFINET Function Manual
•PROFIBUS Function Manual
•Function Manual Designing Interference-free Controllers
•MultiFieldbus Function Manual
Product Information
Changes and supplements to the manuals are documented in a Product Information. The
Product Information takes precedence over the device and system manuals.
You can find the latest Product Information on the ET200SP distributed I/O system on the
Internet. (https://support.industry.siemens.com/cs/de/en/view/73021864)
Manual Collection ET200SP
The Manual Collection contains the complete documentation on the SIMATICET200SP
distributed I/O system gathered together in one file.
You can find the Manual Collection on the Internet.
(https://support.industry.siemens.com/cs/cn/en/view/84133942)
Manual Collection fail-safe modules
The Manual Collection contains the complete documentation on the fail-safe SIMATIC
modules, gathered together in one file.
You can find the Manual Collection on the Internet.
(https://support.industry.siemens.com/cs/ww/en/view/109806400)
1.1.2 SIMATIC Technical Documentation
Additional SIMATIC documents will complete your information. You can find these
documents and their use at the following links and QR codes.
The Industry Online Support gives you the option to get information on all topics. Application
examples support you in solving your automation tasks.
7
Introduction
1.1 ET 200SP Documentation Guide
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
Overview of the SIMATIC Technical Documentation
Here you will find an overview of the SIMATIC documentation available in Siemens Industry
Online Support:
Industry Online Support International
(https://support.industry.siemens.com/cs/ww/en/view/109742705)
Watch this short video to find out where you can find the overview directly in Siemens
Industry Online Support and how to use Siemens Industry Online Support on your mobile
device:
Quick introduction to the technical documentation of automation products per
video (https://support.industry.siemens.com/cs/us/en/view/109780491)
YouTube video: Siemens Automation Products - Technical Documentation at a
Glance (https://youtu.be/TwLSxxRQQsA)
mySupport
With "mySupport" you can get the most out of your Industry Online Support.
Registration You must register once to use the full functionality of "mySupport". After registra
tion, you can create filters, favorites and tabs in your personal workspace.
Support requests Your data is already filled out in support requests, and you can get an overview of
your current requests at any time.
Documentation In the Documentation area you can build your personal library.
Favorites You can use the "Add to mySupport favorites" to flag especially interesting or fre
quently needed content. Under "Favorites", you will find a list of your flagged
entries.
Recently viewed
articles
The most recently viewed pages in mySupport are available under "Recently viewed
articles".
CAx data The CAx data area gives you access to the latest product data for your CAx or CAe
system. You configure your own download package with a few clicks:
• Product images, 2D dimension drawings, 3D models, internal circuit diagrams,
EPLAN macro files
• Manuals, characteristics, operating manuals, certificates
• Product master data
You can find "mySupport" on the Internet. (https://support.industry.siemens.com/My/ww/en)
Application examples
The application examples support you with various tools and examples for solving your
automation tasks. Solutions are shown in interplay with multiple components in the system -
separated from the focus on individual products.
8CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
Introduction
1.1 ET 200SP Documentation Guide
CPU 1512SP-1 PN (6ES7512-1DM03-0AB0)
Equipment Manual, 11/2022, A5E33591411-AE
10
Safety instructions 2
2.1 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please
visit (https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers' exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed visit (https://www.siemens.com/cert).
Andere Handbücher für SIMATIC ET 200SP
101
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Siemens Industrieanlagen Handbücher
Siemens
Siemens SIMATIC NET RUGGEDCOM RX1511 Bedienungsanleitung
Siemens
Siemens MindConnect Nano Bedienungsanleitung
Siemens
Siemens DMA1104D Bedienungsanleitung
Siemens
Siemens 45BJ20A Series Bedienungsanleitung
Siemens
Siemens SIREMOBIL Iso-C Bedienungs- und Wartungsanleitung
Siemens
Siemens SITRANS WFS300 Bedienungsanleitung
Siemens
Siemens SIMATIC NET OBT Bedienungsanleitung
Siemens
Siemens SIRIUS 3RA142-8XB20 Series Bedienungsanleitung
Siemens
Siemens FM 450-1 Technisches Dokument
Siemens
Siemens RUGGEDCOM APE Series Merkblatt
Siemens
Siemens SICAM A8000 Series Bedienungsanleitung
Siemens
Siemens 3WN6 Bedienungsanleitung
Siemens
Siemens SIRIUS S0 Bedienungsanleitung
Siemens
Siemens SIRIUS 3RH24 Series Bedienungsanleitung
Siemens
Siemens SIMATIC IPC MD-34A Bedienungsanleitung
Siemens
Siemens RUGGEDCOM WIN7249 Bedienungsanleitung
Siemens
Siemens SIMATIC RTLS4030T EX1 Bedienungsanleitung
Siemens
Siemens SITRANS FC300 DN 4 Bedienungsanleitung
Siemens
Siemens SIMATIC ET 200SP HA Technisches Dokument
Siemens
Siemens SIWAREX R Bedienungsanleitung
