Siemens SIMATIC NET MODEM MD720 Benutzerhandbuch

SIMATIC NET

GPRS/GSM-Modem

MODEM MD720

System manual

DRAFT

Preface, Contents

Introduction

Inserting the SIM card

Connecting the device and

switching on the device

MODEM MD720 in Terminal

Mode

MODEM MD720 in OPC Mode

Service function

Technical Data

Glossary

Release 07/2013

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and only in

connection with devices or components from other manufacturers which have been approved or recommended by

Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly

as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Postfach 48 48

90437 NÜRNBERG

DEUTSCHLAND

Release 05/2006

Technical data subject to change

Fehler! Verweisquelle konnte nicht gefunden werden. 3

General

The product MODEM MD720 complies with European standard EN60950-1 Safety of

Information Technology Equipment.

Read the installation instructions carefully before using the device.

Keep the device away from children, especially small children.

The device must not be installed or operated outdoors or at damp locations.

Do not operate the device if the connecting leads or the device itself are damaged.

External power supply

Use only an external power supply which also complies with EN60950-1. The output

voltage of the external power supply must not exceed 30VDC. The output of the

external power supply must be short-circuit proof.

Warning

The power supply unit to supply the MODEM MD720 must comply with NEC Class 2

circuits as outlined in the National Electrical Code (ANSI/NFPA 70) only.

When connecting to a battery or accumulator, make sure that an all-pole circuit-

breaker (main battery switch) with sufficient selectivity and a fuse with sufficient

selectivity (e.g 32 V, 3A) are provided between the device and the battery or

accumulator.

Please pay regard to section 7Technical Data of the system manual, as well as the

installation and utilization regulations of the respective manufacturers of the power

supply, the battery or the accumulator.

Handling cables

Never pull a cable connector out of a socket by its cable, but pull on the connector

itself. Cable connectors with screw fasteners (D-Sub) must always be screwed on

tightly. Do not lay the cable over sharp corners and edges without edge protection. If

necessary, provide sufficient strain relief for the cables.

For safety reasons, make sure that the bending radius of the cables is observed.

Failure to observe the bending radius of the antenna cable results in the deterioration

of the system's transmission and reception properties. The minimum bending radius

static must not fall below 5 times the cable diameter and dynamic below 15 times the

cable diameter.

4 Fehler! Verweisquelle konnte nicht gefunden werden.

Radio device

Warning

Never use the device in places where the operation of radio devices is prohibited. The

device contains a radio transmitter which could in certain circumstances impair the

functionality of electronic medical devices such as hearing aids or pacemakers. You

can obtain advice from your physician or the manufacturer of such devices. To prevent

data carriers from being demagnetized, do not keep disks, credit cards or other

magnetic data carriers near the device.

Installing antennas

Warning

The emission limits as recommended by the Commission on Radiological Protection

(13/14 September 2001) must be observed.

Installing an external antenna

Caution

The use of an outdoor antenna without adequate additional protection circuits is not

allowed. Installation must be done by a qualified person and in accordance to nationa

regulations.

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer / installer or an experienced radio/TV technician for help.

Fehler! Verweisquelle konnte nicht gefunden werden. 5

FCC Part 15.19

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference that

may cause undesired operation.

FCC Part 15.21

Modifications not expressly approved by this company could void the user's authority

to operate the equipment.

Installation by qualified personnel only

You may only use the MODEM MD720 with an antenna of the MODEM MD720

accessory program.

The installation of the MODEM MD720 and the antenna as well as servicing is to be

performed by qualified technical personnel only. When servicing the antenna, or

working at distances closer than those listed below, ensure the transmitter has been

disabled.

RF Exposure mobile

Caution

Typically, the antenna connected to the transmitter is an omni-directional antenna with

0dB gain. Using this antenna the total composite power in PCS mode is smaller than 1

watt ERP.

The internal / external antennas used for this mobile transmitter must provide a

separation distance of at least 20 cm from all persons and must not be co-located

or operating in conjunction with any other antenna or transmitter."

Caution

This is a class B equipment. This equipment can disturb other electric equipment in

living areas; in this case the operator can be demanded to carry out appropriate

measures.

6 Fehler! Verweisquelle konnte nicht gefunden werden.

Caution

Please note that data packets exchanged for setting up connections, reconnecting,

connect attempts (e.g. Server switched off, wrong destination address, etc.) as well as

keeping the connection alive are also subject to charge.

Fehler! Verweisquelle konnte nicht gefunden werden. 7

Preface

Purpose of this documentation

This documentation will support you on your way to successful application of

MODEM MD720. It will introduce you to the topic in clear and

straightforward steps and provide you with an overview of the hardware of

the MODEM MD720 GSM/GPRS modem. This documentation will help you

during installation and commissioning of SINAUT GSM/GPRS modem and

explains the diagnostics and service options available.

Validity of the documentation

This manual relates to the following product versions

GPRS/GSM modem MD720 hardware release 1.x

SIMATIC Technical Support

You can contact Technical Support for all A&D products

Phone: +49 (0) 180 5050 222

Fax: +49 (0) 180 5050 223

You will find further information on our Technical Support on the Web at

http://www.siemens.com/automation/service

Service & Support on the Internet

In addition to our documentation services, you can also make use of all our

knowledge on the Internet:

http://www.siemens.com/automation/service&support

Here, you will find:

Up-to-date product information (Updates), FAQs (Frequently Asked

Questions), Downloads, Tips and Tricks.

The Newsletter keeps you constantly up to date with the latest

information on the products you use.

The Knowledge Manager will find the documents you need.

In the Forum, users and specialists exchange information and

experience.

You can find your local contact for Automation & Drives in our contacts

database.

You will find information on local service, repairs, spares and much more

under the rubric "Service".

You will find the latest version of this documentation under the entry ID

22549543.

Preface

8 Fehler! Verweisquelle konnte nicht gefunden werden.

Do you still have questions relating to the use of the products described in

the manual? If so, then please talk to your local Siemens contact.

You will find the addresses in the following sources:

On the Internet at: http://www.siemens.com/automation/partner

On the Internet at http://www.siemens.com/simatic-net specifically for

SIMATIC NET products

In the catalog CA 01

In the catalog IK PI specifically for SIMATIC NET products

SIMATIC training center

To familiarize you with the systems and products, we offer a range of

courses. Please contact your regional training center or the central training

center in

D-90327 Nuernberg.

Phone: +49 (911) 895-3200

http://www.sitrain.com

SIMATIC NET training center

For courses specifically on products from SIMATIC NET, please contact:

SIEMENS AG

Siemens AG, A&D Informations- und Trainings-Center

Dynamostr. 4

D-68165 Mannheim

Phone: +49 (621) 4 56-23 77

Fax: +49 (621) 4 56-32 68

Fehler! Verweisquelle konnte nicht gefunden werden. 9

Contents

Preface.......................................................................................................................................... 7

1Introduction................................................................................................................... 11

2Inserting the SIM card.................................................................................................. 13

3Connecting the device and switching on the device................................................ 14

4MODEM MD720 in Terminal Mode ............................................................................. 19

4.1 Terminal mode activation................................................................................... 19

4.2 Operating requirements in Terminal Mode: GPRS subscriber contract............ 20

4.3 Functions of the LEDs in Terminal Mode .......................................................... 20

4.4 Terminal mode operation................................................................................... 21

4.5 Entering AT commands..................................................................................... 22

4.6 Use AT commands............................................................................................ 24

4.7 Supported AT commands in Terminal Mode..................................................... 26

5MODEM MD720 in OPC Mode..................................................................................... 53

5.1 OPC Mode activation......................................................................................... 54

5.2 Operating requirements in OPC Mode: GPRS subscriber contract .................. 54

5.3 Functions of the LEDs in OPC Mode................................................................. 55

5.4 PIN in OPC-Mode.............................................................................................. 56

5.5 Log in to SINAUT MICRO SC............................................................................ 58

6Service functions.......................................................................................................... 59

6.1 Switching between Terminal mode and OPC Mode.......................................... 59

6.2 Getting the current settings and values............................................................. 61

6.3 Load factory defaults ......................................................................................... 62

7Technical Data .............................................................................................................. 63

Glossary ..................................................................................................................................... 67

Contents

10 Fehler! Verweisquelle konnte nicht gefunden werden.

Inhaltsverzeichnis

Andere Siemens Modem Handbücher

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens EDGE Speed ES75 Bedienungsanleitung

Siemens

Siemens SINAUT MD720-3 Bedienungsanleitung

Siemens

Siemens 1015N-2MFM-1A Bedienungsanleitung

Siemens

Siemens TC35 Bedienungsanleitung

Siemens

Siemens SITRANS TK Bedienungsanleitung

Siemens

Siemens SE505 Bedienungsanleitung

Siemens

Siemens SpeedStream 4200 Bedienungsanleitung

Siemens

Siemens SINAUT MD720-3 Benutzerhandbuch

Siemens

Siemens MC35 Terminal Bedienungsanleitung

Siemens

Siemens Gigaset USB Stick 54 Bedienungsanleitung

Siemens

Siemens Insys 56k Bedienungsanleitung

Siemens

Siemens C2-010 Bedienungsanleitung

Siemens

Siemens TC35i Terminal Bedienungsanleitung

Siemens

Siemens Gigaset SX685 WiMAX Bedienungsanleitung

Siemens

Siemens 7XV5655-0BB00 Bedienungsanleitung

Siemens

Siemens 7NG3092-8KU Bedienungsanleitung

Siemens

Siemens Brodersen MC55 AT Montageanleitung

Siemens

Siemens 7XV5655-0BB00 Bedienungsanleitung

Siemens

Siemens Gigaset USB Stick 108 Bedienungsanleitung

Siemens

Siemens SINAUT ST7 Bedienungsanleitung

Siemens

Siemens TC35i Terminal Bedienungsanleitung

Siemens

Siemens Gigaset USB Stick 108 Bedienungsanleitung

Siemens

Siemens SE366 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung