Siemens Codelock K44 Duo Bedienungsanleitung

1 2 3

Fire Safety & Security Products

Siemens Building Technologies

Codelock K44 Duo

Installation & User Manual

Book Contents

English ............................................................3

Svenska......................................................... 27

Deutsch ......................................................... 51

Francais.........................................................79

Dansk.......................................................... 107

Suomi...........................................................131

Norsk............................................................155

K44 Duo Installation & User manual 3

ENG

English

Data and design subject to change without notice.

Supply subject to availability.

We reserve all rights in this document and in the subject thereof. By acceptance

of the document the recipient acknowledges these rights and undertakes not

to publish the document nor the subject thereof in full or in part, nor to make

them available to any third party without our prior express written authoriza-

tion, nor to use it for any purpose other than for which it was delivered to him.

4 K44 Duo Installation & User manual

ENG

Contents

What is K44 Duo?........................................... 5

Duress or alert.......................................................................... 6

Zero opening............................................................................ 6

Unlock the door permanently.................................................... 6

Door bell .................................................................................. 6

The keypad.................................................... 7

Wiring............................................................8

Programming............................................... 10

Buzzer and LEDs ..................................................................... 10

Choose password ...................................................................11

Change password....................................................................11

Programming commands ..............................11

Program codes ........................................................................12

Erase codes.............................................................................13

Change codes..........................................................................14

Set opening time.....................................................................15

Background lighting on/off......................................................15

Buzzer on/off...........................................................................16

Toggle function on/off .............................................................16

Duress or Alert.........................................................................17

Door monitoring on/off........................................................... 18

Set door held warning time......................................................19

Delay on/off........................................................................... 20

Erase the memory................................................................... 20

Using K44 Duo............................................. 21

Entrance..................................................................................21

Unlock the door permanently...................................................21

Enter duress code ................................................................... 22

Technical data.............................................. 23

K44 Duo Installation & User manual 5

ENG

What is K44 Duo?

K44 Duo is a compact code lock with two relay outputs. This

makes K44 Duo capable of controlling two doors – or one

door and an optional function, e.g. a light switch. Either

a four- or a six-digit code can be used to open connected

doors. All programming is done from the keypad.

Open two doors using one code

The advantage of using two relay outputs is that two func-

tions can be activated at the same time, using only one

code. For example, the code can open the lock and turn on

a light switch at the same time.

Another setup is to connect the code lock to two doors.

One code is programmed to operate both doors, while the

other only opens one of the doors.

If the code is programmed to open both doors, you can

set K44 Duo so that the other door does not open until

the ﬁrst door has been opened and closed (see the Delay

section).

For each code, choose whether to activate both relay

outputs, only one or only the other.

Disable the codes whenever needed

K44 Duo offers the possibility to disable codes at certain

times. For example, the cleaning staff’s access to the build-

ing can be limited to certain hours, while tenants/staff can

have access to the door 24 hours a day.

By connecting two time clocks to K44 Duo, three different

time zones can be used to control the codes: one controlled

by time clock 1, one controlled by time clock 2 and one that

is valid 24 hours a day, i.e. no time control.

6 K44 Duo Installation & User manual

ENG

Duress or alert

K44 Duo is equipped with an output that can be activated

for one of the following reasons:

A user enters a duress code

The door held warning time expires or the door is

forced open

Choose which alternative to use. Then connect e.g. a bur-

glar alarm or similar to the output.

Zero opening

To make entrance easier, e.g. during ofﬁce hours, connect

an external contact. Then use the contact to activate or

deactivate zero opening, i.e. opening the door by pressing

the zero button on the keypad. Note that this is only applies

to relay output 1.

Unlock the door permanently

If the Toggle function is activated, the code can be used to

unlock the door. The door remains open until a valid code is

entered once again (see the Toggle on/off section).

Door bell

If needed, a door bell can be connected to K44 Duo. To ring

the bell, the visitor presses the button labelled with a bell

on the code lock’s keypad.

•

K44 Duo Installation & User manual 7

ENG

The keypad

1 2 3

Red LED

For optional

use, e.g.

to indicate

alarm on.

Red LED

For optional

use, e.g.

to indicate

alarm on.

Yellow LED

Indicates

keypresses.

Yellow LED

Indicates

keypresses.

Green LED.

Lit when

the door is

unlocked.

Green LED.

Lit when

the door is

unlocked.

= A.

Acts as a door bell

button and starts

the sequence telling

the K44 Duo what to

you want to program.

E.g. A21 to program

codes.

= A.

Acts as a door bell

button and starts

the sequence telling

the K44 Duo what to

you want to program.

E.g. A21 to program

codes.

Press B and enter

the 6-digit pass-

word to programme

the K44 Duo. Press

B to leave the pro-

gramming mode.

Press B and enter

the 6-digit pass-

word to programme

the K44 Duo. Press

B to leave the pro-

gramming mode.

8 K44 Duo Installation & User manual

ENG

Wiring

12-24V

SW1

LED

TAMPER

”0”





LOCK 1

EXIT 1

CONTACT 1

LOCK 2

EXIT 2

CONTACT 2



K44 Duo Installation & User manual 9

ENG

Power in, terminal nos 1(+) and 2. 12-24 V.

Input for extra LED (red), terminal nos 3 and 4. 10-35

V DC.

Tamper switch, terminal nos 5 and 6. Closed when

the housing is closed.

Code disabling from external time clock.

Input 1: Close terminal nos 8 and 7.

Input 2: Close terminal nos 9 and 7.

Output for alert or duress. Use E7 relay. Connect

between terminal nos 10 and 1(+).

Contact for zero (0) opening. Close terminal nos 11

and 7.

Output for Door bell (buzzer). Use E7 relay. Connect

between terminal nos 12 and 1(+).

Input for door contacts. The contact is closed when

the door is closed. Terminal nos 13 and 15 (19 and 21

respectively).

Exit button. The door opens on closing terminal nos

14 and 15 (20 and 21 respectively).

Electric locking device. Dashed line refers to locks

with fail-safe function.

SW1 push button. Used when choosing password

and erasing memory.

10 K44 Duo Installation & User manual

ENG

Programming

Before you start programming K44 Duo, make a note

of the codes to be used, to what timing group they

should belong and which relay output they should

control. At the back of this manual you will ﬁnd a

chart designed for this purpose. Look at the chart

as you program K44 according to the instructions

below.

Buzzer and LEDs

During programming you will be guided by the buzzer

and the LEDs.

In programming mode before a function is chosen:

Green and yellow LED ﬂashes.

During programming: Yellow LED goes out. Green

LED is lit.

Correct instruction: Conﬁrmed by a rising signal

consisting of two quick beeps.

Faulty instruction: Conﬁrmed by a falling signal

consisting of two quick beeps.

NOTE!

During programming mode, if a button is not

pressed within 20 seconds, the code lock

goes back to normal operation.

Andere Handbücher für Codelock K44 Duo

Inhaltsverzeichnis

Sprachen:

Andere Siemens Sicherheitssystem Handbücher

Siemens

Siemens SIMATRIX NEO 2GF2211-8EA Gebrauchsanweisung

Siemens

Siemens FDM275 Leitfaden

Siemens

Siemens ISRW6-12 Bedienungsanleitung

Siemens

Siemens SIPASS SK5 Installations- und Betriebshandbuch

Siemens

Siemens FDS229-A Bedienungsanleitung

Siemens

Siemens FDM225 Bedienungsanleitung

Siemens

Siemens IGS6-10 Bedienungsanleitung

Siemens

Siemens MI291A Leitfaden

Siemens

Siemens FDCAI181 Bedienungsanleitung

Siemens

Siemens Cerberus PACE Compact Service-Handbuch

Siemens

Siemens WAC 12 Bedienungsanleitung

Siemens

Siemens Cerberus PACE Leitfaden

Siemens

Siemens FDM223-Ex Bedienungsanleitung

Siemens

Siemens RB-6 L-801A Bedienungsanleitung

Siemens

Siemens FS20 Betriebsanleitung

Siemens

Siemens HFPO-11 Bedienungsanleitung

Siemens

Siemens FDM275 Bedienungsanleitung

Siemens

Siemens SPCY130 Bedienungsanleitung

Siemens

Siemens IMKW6-10 Bedienungsanleitung

Siemens

Siemens FC700A Technische Daten

Siemens

Siemens FDM221 Bedienungsanleitung

Siemens

Siemens FDAI91 Bedienungsanleitung

Siemens

Siemens IC60 Bedienungsanleitung

Siemens

Siemens MM8000 Kurzanleitung zur Einrichtung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung