Siemens DB-ADPT Bedienungsanleitung

The SIEMENS Model DB-ADPT detector/base adapter

interfaces Series 11 detectors with previously installed

DB-3S bases For Series 3 air duct detector models

AD-3P, AD-3ILP, and SA-3P, use Series 11 Air Duct

Update Kit AD-11UK, which contains both the DB-ADPT and

the required DA-304 air duct cover for Series 11 detectors

WARNING:

When replacing a detector with a different model, be

aware that existing detector accessories connected

to the base or air duct housing that were compatible

with the old detector may not be compatible with the

new detector Always read the Installation Instruc-

tions accompanying the detector to determine detec-

tor and accessory compatibility

P/N 315-094200-6

Installation Instructions

Model DB-ADPT

Detector/Base Adapter

Fire Safety

Siemens Building Technologies, Inc.

Fernwood Road

Florham Park, New Jersey 07932

Siemens Building Technologies, Ltd.

2 Kenview Boulevard

Brampton, Ontario L6T 5E4 CN

INSTALLATION

For DB-3S Bases:

1 Remove the existing detector from the DB-3S base

2 To install the DB-ADPT adapter into the DB-3S base,

align the notch in the outer flange of the adapter to the

raised surface on the outer ring of the base (Refer to

Figure 1)

3 Push the adapter into the base and rotate clockwise to

engage the electrical connections The adapter will

automatically stop and lock into place

4 To make the adapter to DB-3S interface tamperproof

in the base, use the Model DB-LK

5 Install a Series 11 detector following the installation

instructions included with the detector

NOTE: If it becomes necessary to remove the

adapter, push the adapter up into the base

while rotating the adapter counterclockwise

Continue to rotate counterclockwise until stop

is reached Then pull downward to disengage

from the base When the DB-LK lock is used,

disengage the locking mechanism prior to

removing the adapter

Figure 1

Installing the DB-ADPT to the DB-3S Base

For Series 3 Airduct Housings using the AD-11UK

Air Duct Update Kit:

1 Remove the sensing compartment cover from the

existing duct housing

2 Remove the existing detector from the duct housing

3 To install the adapter into the duct housing, rotate

the adapter counterclockwise on the outer ring of

the base located in the duct housing until the

adapter drops into place

P/N 315-094200-6

4 Push the adapter down into the base and rotate

clockwise to engage electrical connections The

adapter will automatically stop and lock into place

5 Install a Series 11 detector following the installation

instructions included with the detector and then

install the new DA-304 sensing compartment cover

Tighten the cover snugly, but not so tightly as to

warp cover and cause leakage around the edges

NOTE: If it becomes necessary to remove the

adapter, push the adapter down into the

duct housing while rotating the adapter

counterclockwise Continue to rotate

counterclockwise until stop is reached

Then pull upward to disengage from the

housing

Inhaltsverzeichnis

Andere Siemens Rauchmelder Handbücher

Siemens

Siemens DELTA reflex SD230N Service-Handbuch

Siemens

Siemens OP121 Bedienungsanleitung

Siemens

Siemens FDBZ292 Bedienungsanleitung

Siemens

Siemens FDL241-9 Leitfaden

Siemens

Siemens AD1-C11 Bedienungsanleitung

Siemens

Siemens OP121 Bedienungsanleitung

Siemens

Siemens DM1101 Bedienungsanleitung

Siemens

Siemens Cerberus DBW1171 Bedienungsanleitung

Siemens

Siemens Cerberus DOT1151A-Ex Stücklistenhandbuch

Siemens

Siemens Cerberus DLO1191 Bedienungsanleitung

Siemens

Siemens Cerberus DO1101A-Ex Stücklistenhandbuch

Siemens

Siemens DB721-CN Bedienungsanleitung

Siemens

Siemens FDA2 1 Series Bedienungsanleitung

Siemens

Siemens OP121 Bedienungsanleitung

Siemens

Siemens FDA241 Leitfaden

Siemens

Siemens DELTA reflex SD9L Service-Handbuch

Siemens

Siemens AD2-C11 Bedienungsanleitung

Siemens

Siemens OP921 Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

Siemens

Siemens TITANUS 3000 Bedienungsanleitung

Siemens

Siemens Cerberus DLO1191 Leitfaden

Siemens

Siemens DOW1171 Bedienungsanleitung

Siemens

Siemens FDA241 Technisches Handbuch

Siemens

Siemens FDOT421 Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

LST

LST ÜMS-55000-841 Bedienungsanleitung

Radal Technology

Radal Technology Cig-Arrête CSA-POD Bedienungsanleitung