Siemens Sinteso Cerberus PRO FDA221 Bedienungsanleitung

A6V10331032_j_en_-- Building Technologies

2019

Control Products and Systems

Sinteso™ Cerberus™ PRO

FDA241, FDA221

ASD Aspirating smoke detector

Siemens aspirating smoke detector (ASD) for the addressed FDnet/C

NET

detector line or for standalone operation

●Patented technology

●Early detection of a wider spectrum of particle sizes in the air

●Configuration using the USB interface or the control panel via FDCC221S

(optional)

●'ASD Asyst-Tool' software to assist with pipe configuration

●Unique dust-resistant detection chamber

●Intuitive front indicator for airflow and smoke value

●Access to service functions

●Different event protocols

●Offline/online configuration supported

●Cleaning function (FDA241)

●4…20 mA output

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Properties

●Extended optical detection thanks to dual wavelengths (blue and infrared): The

aspirating smoke detectors FDA241 and FDA221 use dual-wavelength technology to

trigger an alarm at the earliest possible moment. They are designed to protect small and

medium-sized business-critical environments for monitoring areas of up to 800 m2

(FDA241) or 500 m2(FDA221). The detectors continually suck in air through a pipe

system via their aspirating holes. The air is fed into a uniquely designed detection

chamber, in which tiny smoke particles are detected by scattered light.

●Lower mounting and service costs: The aspirating smoke detectors FDA241 and

FDA221 can be used on an FDnet/C-NET detector line. For this purpose, communication

transponder FDCC221S is required.

●Configuration using the USB interface or the control panel via FDCC221S (optional): All

detector configurations, maintenance work, and alarm and fault management processes

can be carried out at a central location – the fire control panel. This ensures better

control while also reducing the costs of the overall solution.

●'Out-of-the-box' mounting and commissioning: Installation is simple thanks to combined

functions for normalizing smoke values and airflow, as well as appropriate presettings for

alarm and fault thresholds.

●ASD filter box FDAZ292 available as an accessory: Dust and other dirt is filtered out of

the aspirated air and does not get into the aspirating smoke detector. The filters in the

ASD filter box are easy to replace.

Use

Aspirating smoke detectors are used for early detection of smoke-generating fires in rooms

and equipment. They are especially suited to applications in which point detectors are

pushed to their limits, cannot be used or can only be used with restrictions.

The aspirating smoke detector continually takes air from the monitored room using a

connected pipe system with defined aspirating holes. The air is supplied to the detection

chamber and is analyzed for smoke particles using the detector installed there. The

sensitivity of the detector can be adjusted.

The position and size of the aspirating holes are calculated with the 'FXS2056 ASD Asyst

Tool V2' software. The calculation ensures that the air passes from the aspirating hole to the

detector in the time specified and with the required calculated sensitivity.

The '

FXS2056

ASD Asyst Tool V2

' software is replacing the '

FXS2055

ASD Asyst Tool

software.

Examples of application

●Cavities such as false ceilings or false floors

●Clean rooms

●Rooms the height of which is greater than that permitted for point detectors

●Rooms with electromagnetic fields which influence the function of point detectors

●Large rooms up to 800 m²

●Separate monitoring of control cabinets and electronics cabinets

●Data centers

●Telecommunication centers

●Mounting lines

●Cable tunnels

●Conveyor belts

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Applications with a filter box

●Rooms with polluted air, in which the pollution has impaired the performance of optical

point detectors

●Mounting lines

●Recycling facilities

●Cement factories

●Mining industry

●Subway stations

●Agricultural operations

●All other applications with visible dust load

Functions

Indication

The display contains clear, comprehensible bar graphs for smoke and airflow, as well as an

alarm indicator, an error indicator, and a dust indicator (FDA241).

When the housing cover is open, the operator has access to the 'Reset', 'Normalize Smoke',

and 'Normalize Flow' functions, as well as the mini USB connector.

Front indicator FDA241

Front indicator FDA221

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Legend for the response indicators

Operation Flow warnings Smoke alarm Info alarm

Blowing

out

High flow

Normal flow

Low flow

Fire 2 No smoke

Error Fire 1

Pre-alarm

Fault/test

Dust

Opening the detector

CAUTION

Damage to the

connection cable

In order to prevent damage to the connection cable when positioning the housing cover,

make sure that the connection cable has been routed correctly.

The service area for the detector can be accessed in two ways.

●Partial access:

– Remove the two screws on the top of the detector.

– Slide the housing cover up until you hear it snap into place.

●Full access:

– Remove the two screws on the top of the detector.

– Slide the housing cover up until you hear it snap into place.

– Pull the housing cover out slightly at the sides and lift it up.

– Remove the housing cover.

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Service LED indicators and buttons

Flow OK

As soon as the selftest for normal operation has been completed successfully, the 'Flow OK'

LED starts to flash.

Smoke OK

As soon as the selftest for normal operation has been completed successfully, the

'Smoke OK' LED starts to flash.

Alarm

In the event of a smoke alarm, the 'Alarm' LED starts to flash.

Normalization of the airflow

To determine the nominal airflow of the detector, perform this function during commissioning.

The nominal value established during normalization of the airflow forms the setpoint value for

monitoring the airflow during normal operation.

To perform this function, use a thin object (such as a paper clip or a watchmaker's

screwdriver) to press the button in the opening.

Once you have finished with this function, press the button in the opening again.

The smoke detector uses standard values for monitoring during normalization.

Normalization of the smoke density

To determine the nominal air quality in relation to the smoke density, perform this function

during commissioning. The nominal value established during normalization forms the

setpoint value for monitoring the smoke density during normal operation.

To perform this function, use a thin object (such as a paper clip or a watchmaker's

screwdriver) to press the button in the opening.

Once you have finished with this function, press the button in the opening again.

The smoke detector uses standard values for monitoring during normalization.

The detector provides information about the current normalization process via

FDnet/C-NET (no distinction is made between smoke and airflow).

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Reset button

Use the reset button to reset all of the detector's status indicators. These indicators can refer

to fire alarms or airflow events. Resetting the fire alarm also resets the associated relay.

If the detector is operated on the

FDnet/C

NET

, the alarms and the associated relays are

not reset.

USB connection

You can use a mini USB cable to connect the detector to a Windows PC. To set up the

detector, use the configuration tool 'FXS2051 ASD Configuration Tool'.

Test function LED

Hold the 'Buzzer silence' button down for 5 seconds. The LEDs on the display are tested

with 3 different brightness settings.

If the aspirating smoke detector is to be operated on the FDnet/C-NET, the communication

interface FDCC221S (S24218-A201-A2) must be ordered separately.

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Accessories

Communication interface FDCC221S

●For connecting the aspirating smoke detector to FDnet/C-NET

●Integrated 'line separator' function

●Additional MC link interface (port for 3.5 mm jack)

●Tool-free mounting on a designated PCB slot

●Supplied with:

– 2x spacers with thread

– 4-pin plug-in terminal

– ID adhesive label

Power supply kit FP120-Z1

●Standalone power supply (70 W)

●Supply to external devices and components in accordance with EN 54-4 and

VdS

●With operating and fault indicator, shown via a green and a yellow LED

●With potential-free relay contacts for fault messages

●Additional installation of an I/O module possible

●Uninterruptible power supply with battery charging

●Batteries: max. 17 Ah

●Dimensions: (W x H x D) 430 x 399 x 124 mm

Battery FA2003-A1 (12 V, 7 Ah, VdS)

●For supplying fire control panels and aspirating smoke detectors with power

●Compatible with:

– Fire control panels for the 'Sinteso' and 'Cerberus PRO' product lines

– External power units for the aspirating smoke detectors FDA241 and

FDA221

Battery FA2004-A1 (12 V, 12 Ah, VdS)

●For supplying fire control panels and aspirating smoke detectors with power

●Compatible with:

– Fire control panels for the 'Sinteso' and 'Cerberus PRO' product lines

– External power units for the aspirating smoke detectors FDA241 and

FDA221

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Battery FA2005-A1 (12 V, 17 Ah, VdS)

●For supplying fire control panels and aspirating smoke detectors with power

●Compatible with:

– Fire control panels for the 'Sinteso' and 'Cerberus PRO' product lines

– External power units for the aspirating smoke detectors FDA241 and

FDA221

FDAZ291 aspirator (FDA241/FDA221)

●Spare part for the aspirating smoke detectors FDA241 and FDA221

●You will find more information in document A6V10916366

FDAZ292 ASD filter box

●Filter box for installation in the pipe system for aspirating smoke detectors

●Filters dust and other dirt out of the air aspirated by the aspirating smoke

detector

●Minimizes internal contamination of the aspirating smoke detector

●Contains filter set FDAZ292-AA with three filters, coarse/medium/fine

●Compatible with the aspirating smoke detectors FDA241 and FDA221

●You will find more information in document A6V10877841

FDAZ292-AA ASD filter set

●Spare part for the ASD filter box FDAZ292

●Filter set contains one coarse filter, one medium filter, and one fine filter

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Type Overview

Type Designation Order number Weight [kg]

FDA241 Aspirating smoke detector (8H) S54333-F17-A1 1.495

FDA221 Aspirating smoke detector (5S) S54333-F15-A1 1.495

Accessories

FDCC221S Communications interface S24218-A201-A2 0.019

FP120-Z1 Power supply kit A (70 W) S54400-S122-A1 3.920

FA2003-A1 Battery (12 V, 7 Ah, VdS) A5Q00019353 2.450

FA2004-A1 Battery (12 V, 12 Ah, VdS) A5Q00019354 3.930

FA2005-A1 Battery (12 V, 17 Ah, VdS) A5Q00019677 5.640

FDAZ292 ASD filter box S54333-C92-A1 0.220

Spare parts

FDAZ292-AA ASD filter set S54333-S91-A1 0.009

FDAZ291 Aspirator (FDA241/FDA221) S54333-G1-A1 0.106

Product documentation

Document ID Title

A6V10334410 Technical manual Aspirating smoke detector FDA241, FDA221

A6V10393194 Technical manual Power supply kit A 70 W FP120-Z1

A6V10345654 Installation, Mounting Aspirating Smoke Detectors FDA241, FDA221

A6V10340094 User Manual 'ASD Asyst Tool FXS2055'

A6V10728226 User Manual 'ASD Asyst Tool V2 FXS2056'

A6V10334435 Planning, Installation ASD Pipe system

A6V10332759 Installation, Operation Manual, Configuration 'ASD Configuration Tool FXS2051'

A6V10877841 Installation ASD Filterbox FDAZ292

A6V10916591 Installation Aspirator (FDA241/FDA221) FDAZ291

Related documents such as environmental declarations, CE declarations, etc., can be

downloaded at the following Internet address:

http://siemens.com/bt/download

Notes

Disposal

The device is considered an electronic device for disposal in accordance

with the European Guidelines and may not be disposed of as domestic

garbage.

●Dispose of the device through channels provided for this purpose.

●Comply with all local and currently applicable laws and regulations.

Building Technologies

A6V10331032_j_en_

Fire Safety 2019-01-24

Technical data

FDA241 FDA221

Operating voltage DC 19…30 V

Operating current at DC 24 V 150 mA (nominal), 250 mA (during alarm)

Dimensions (W x H x D) 162 x 285 x 120 mm

Protection category IP30

Installation position Vertically upward, vertically downward

Sound power level LWA [dBA]: 1) -

At suction speed

- High

- Medium

- Low

Operating temperature -20…+60 °C

Air humidity 5…95 % (no moisture condensation)

Dust indicator Yes -

Maximum pipe length

- Single line

- Branched lines

60 m

2x 60 m

30 m

2x 25 m

Options for aspirating holes Prefabricated option or the maximum pipe length must correspond to the

calculation made using the 'FXS2056 ASD Asyst Tool V2' software

Air intake/exhaust pipe Metric: 25 mm outer diameter (OD)

Monitoring area (dependent on local

provisions and standards)

Up to 800 m² Up to 500 m²

System compatibility Compatible with all Siemens FC20/FC720 (FS20/FS720 systems)

Relay alarm outputs

Can be selected with/without lock

Nominal current 2.0 A at DC 30 V.

Contact: NO/NC

4 3

Fault relay 1 1

Cable inlet 10 cm x 2.5 cm on the rear or from above

Terminal configuration Screw terminals

Cable cross section 0.2…2.5 mm2(AWG 12…30)

Other interfaces Power supply, 4…20 mA

Alarm threshold for parameter sets:

Fire 1 10 sets

0.05…2.0 %/m obs

5 sets

0.20…2.0 %/m obs

Fire 2 10 sets

2.0…20 %/m obs

5 sets

6.0…20 %/m obs

Alarm delay, can be set individually 0…300 seconds: default value 0 seconds smoke density and

15 seconds flow

Dieses Handbuch passt für folgende Modelle

Andere Siemens Rauchmelder Handbücher

Siemens

Siemens FDA2 Series Technisches Handbuch

Siemens

Siemens DELTA Reflex SD9 Service-Handbuch

Siemens

Siemens FDOT421 Bedienungsanleitung

Siemens

Siemens AD2-C11 Bedienungsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

Siemens

Siemens DB721-CN Bedienungsanleitung

Siemens

Siemens FDA241 Leitfaden

Siemens

Siemens FDBZ292 Bedienungsanleitung

Siemens

Siemens BH17 7ER Bedienungsanleitung

Siemens

Siemens Synco living AP260 Bedienungsanleitung

Siemens

Siemens DELTA reflex SD9L Service-Handbuch

Siemens

Siemens Cerberus Pyrotronics PB-1191 Bedienungsanleitung

Siemens

Siemens Cerberus DOT1151A-Ex Stücklistenhandbuch

Siemens

Siemens FDA2 1 Series Bedienungsanleitung

Siemens

Siemens TITANUS 3000 Bedienungsanleitung

Siemens

Siemens 5TC1292-6 Bedienungsanleitung

Siemens

Siemens OP121 Bedienungsanleitung

Siemens

Siemens DOW1171 Bedienungsanleitung

Siemens

Siemens DOW1171 Bedienungsanleitung

Siemens

Siemens DM1101 Bedienungsanleitung

Siemens

Siemens ILP-1 Bedienungsanleitung

Siemens

Siemens DELTA reflex SD230N Service-Handbuch

Siemens

Siemens OP921 Bedienungsanleitung

Siemens

Siemens AD1-C11 Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

BRK electronic

BRK electronic First Alert P1010 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Safetec

Safetec SDS-2/6 Betriebsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung

Aparton

Aparton ASD-10 Bedienungsanleitung