Siemens ATI510 Bedienungsanleitung

Building Technologies

Fire Safety & Security Products

ATI5100

Intrusion Arming Terminal

Installation

Technical specifications and availability subject to change without notice.

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights

and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our

prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

1About this document ....................................................................................4

2Safety..............................................................................................................5

2.1 Target Group...................................................................................................5

2.2 General Safety Precautions............................................................................5

2.2.1 General Information.........................................................................5

2.2.2 Transport..........................................................................................5

2.2.3 Installation........................................................................................5

2.2.4 Service and Maintenance................................................................6

3Standards and Guidelines............................................................................6

3.1 EU-Directives ..................................................................................................6

3.2 FCC.................................................................................................................6

3.3 C-Tick..............................................................................................................7

3.4 UL-Directives...................................................................................................7

4Technical Data...............................................................................................7

4.1 Recommended Cable Specifications..............................................................8

5Details for Ordering ......................................................................................9

6Package Contents.........................................................................................9

7Description of Equipment ............................................................................9

7.1 Service Description.........................................................................................9

7.2 Product overview...........................................................................................10

7.3 Set Jumpers..................................................................................................11

8Installation ...................................................................................................12

8.1 Opening the housing.....................................................................................12

8.2 Connecting cables.........................................................................................13

8.3 Mounting the base.........................................................................................13

8.4 Mounting the cover........................................................................................14

8.5 Programming and firmware download..........................................................14

9Disposal .......................................................................................................15

Table of contents

About this document

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

1About this document

This document contains information on the installation of the product.

For information on usage refer to the user manual. For information on configuration

refer to the SiPass integrated user manual.

Contacting us

If you have questions or suggestions regarding the product or this documentation,

please contact our Customer Support Center:

Intranet: Customer Support Center

Internet: Worldwide contacts

Email: fs.support.sbt@siemens.com

Tel.: +49 89 9221 8000

Training courses

Siemens Building Technologies Fire Safety & Security Products provides training

courses for all products.

Safety

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

2Safety

2.1 Target Group

Target

readers

Qualification Activity Condition of the

product

Installer Technical training for

electrical installations.

Installs the product,

individual components

of the product or

replacement parts.

Components of the

product are not yet

installed or need to be

replaced or modified.

2.2 General Safety Precautions

2.2.1 General Information

Read the general safety precautions before installing/configuring/operating the

device.

Keep this document for reference.

Always pass this document on together with the product.

Liability claim

Use only spare parts and accessories that have been approved by the

manufacturer.

Danger of electrical shock on the open device

Only qualified personnel should open the unit.

2.2.2 Transport

Damage during transport

Keep the packaging material for future transportation.

Do not expose the device to mechanical vibrations or shocks.

2.2.3 Installation

Refer installation to a qualified electrician.

When handling modules that are susceptible to electrostatic discharge, please

observe the ESD guidelines.

Damage due to unsuitable mounting location

Standards and Guidelines

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

The environmental conditions recommended by the manufacturer must be

observed.

The device should only be used for indoor applications.

Connect the device only to power sources with the specified voltage. Voltage

supply requirements can be found on the rating label of the device.

Protect the device against moisture.

2.2.4 Service and Maintenance

Do not attempt to service or modify this device yourself. Refer this work to

qualified service personnel.

3Standards and Guidelines

3.1 EU-Directives

This product complies with the requirements of the following European directives.

The EU declaration of conformity is available to the responsible agencies at:

Siemens Building Technologies

Fire & Security Products GmbH & Co. oHG

76181 Karlsruhe

Germany

European Directive 2004/108/EC „Electromagnetic Compatibility”

Compliance with the European Directive 2004/108/EC has been proven by testing

according to the following standards:

Emitted interference: EN 55022 class B

Interference resistance: EN 50130-4

3.2 FCC

This equipment complies with the FCC Rules CFR 47 Part 15 Emission Class B

limits.

This equipment has been tested and found to comply with the limits for a Class B,

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turnings the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

Reorient or relocate receiving antenna.

Technical Data

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

3.3 C-Tick

Standard for Australia and New Zealand (equivalent to EN 55022 of European

Directive)

3.4 UL-Directives

UL 294 Access control units, not UL evaluated for Household or Commercial

Burglary.

4Technical Data

ATI5100

Tamper contact Integrated in housing

Display LC: 128 x 64 dots

4 lines with 16 characters per line

Operating voltage 9 to 30 VDC

Current consumption 35 to 82 mA @ 12 V

Operating temperature 0 to +50 °C

Relative humidity 93 % (no dew)

Buzzer Integrated

Sound level: Different settings for alarms and key press

Housing Polycarbonate

IP rating IP30

Colour RAL 9003

Weight 0.38 kg

Dimensions (W x H x D) 112 x 185 x 28 mm

Please note that the ATI5100 is not intended for use with Intrunet SI400 series

(previously known as Sintony) intrusion systems.

Technical Data

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

4.1 Recommended Cable Specifications

NOTICE

Guideline for selecting cables

The table provides a guideline for selecting an appropriate cable type only.

Other cable types are also compatible with the system and can be used to

achieve the same results.

Recommended Cable Specifications Communica-

tion Type Cores Pairs AWG Cores J-Y(St)Y

Diameter

(mm)

Wire

Type

Insulation Shield Jacket

5 2

6 3

RS485

8 4

28 7 x 36 0.6 Tinned

Copper

Foam

Polyethylene

Aluminium foil -

Polyester tape /

braided shield

PVC

4 2

6 3

RS232

8 4

24 7 x 32 0.6 Tinned

Copper

Foam

Polyethylene

Aluminium foil -

Polyester tape /

no braid

PVC

4 2

6 3

RS422

8 4

24 7 x 32 0.6 Tinned

Copper

Foam

Polyethylene

Aluminium foil -

Polyester tape /

no braid

PVC

8 4 Solid Bare

Copper

RJ45

8 4

7 x 32

0.6

Tinned

Copper

Polyethylene Unshielded PVC

8 4 Solid Bare

Copper

RJ12

8 4

7 x 32

0.6

Tinned

Copper

Polyethylene Aluminium foil -

Polyester tape /

no braid

PVC

Power (12/24

V DC)

2 1 18 19 x 30 1.0 Tinned

Copper

Foam

Polyethylene

Unshielded PVC

Details for Ordering

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

5Details for Ordering

Type Part no. Designation Weight

ATI5100 S24246-F2605-A1 Intrusion Arming Terminal 0.38 kg

6Package Contents

1 x ATI5100

1 x Installation manual

Accessories pack

7Description of Equipment

7.1 Service Description

The ATI5100 is an intrusion arming terminal that operates as a part of an

integrated access control and security system. The ATI5100 provides a local

interface between an advanced access controller (ACC) and the cardholder, to arm

and disarm alarm areas.

The following diagram displays where the ATI5100 fits in the SiPass integrated

architecture.

FLN Bus - RS485

ATI5100

DC12 DC22

DRI

DRI IPMIPM

Exit

Reader

Ent r y

Reader

ATI5100 in the SiPass integrated system

Description of Equipment

Building Technologies 020_ATI5100_A6V10235012_a_en

Fire Safety & Security Products 23.09.2009

7.2 Product overview

F3 EOL A

K2 K3

K1 L

Product overview

A Lugs G Screws for mounting

B Printed circuit board H Screw for tamper contact

C Screw terminal I Cable duct

D Tamper switch K1-K3 Breakout pieces

E Fixing screw for printed circuit board L Cable entry hole

EOL Jumper X3 Jumper

F1-F3 Lugs holding the PCB

Inhaltsverzeichnis

Andere Siemens Touch-Terminal Handbücher

Siemens

Siemens 3VA9 Series Bedienungsanleitung

Siemens

Siemens TA5P600 Bedienungsanleitung

Siemens

Siemens SIDATA 9756 Bedienungsanleitung

Siemens

Siemens Simatic RTU303xC Series Bedienungsanleitung

Siemens

Siemens 3VM9 Series Bedienungsanleitung

Siemens

Siemens 3VT9100-4TA30 Bedienungsanleitung

Siemens

Siemens 3VF7 Bedienungsanleitung

Siemens

Siemens MICROMASTER 420 Bedienungsanleitung

Siemens

Siemens 3RV1 Bedienungsanleitung

Siemens

Siemens Ay Bedienungsanleitung

Siemens

Siemens FT2080 Leitfaden

Siemens

Siemens A5E01621433-01 Bedienungsanleitung

Siemens

Siemens DESIGO RXT20.1 Bedienungsanleitung

Siemens

Siemens FT2080 Bedienungsanleitung

Siemens

Siemens 3VL9800-4RG00 Bedienungsanleitung

Siemens

Siemens SIMATIC HMI IPC477C PRO Bedienungsanleitung

Siemens

Siemens 3VM9 0-0WC00 Series Bedienungsanleitung

Siemens

Siemens 3VL9400-4RA00 Bedienungsanleitung

Siemens

Siemens SIMATIC NET PG PROFIBUS Bedienungsanleitung

Siemens

Siemens Gigaset M1 professional Bedienungsanleitung

Siemens

Siemens Climatix HMI-DM Bedienerhandbuch

Siemens

Siemens FTI2001-U1 Bedienungsanleitung

Siemens

Siemens 3UF1900-1KA00 Bedienungsanleitung

Siemens

Siemens SENTRON 3TW1CG20PT Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung