Siemens SIMATIC IFP Basic Series Bedienungsanleitung

IFP Basic

SIMATIC HMI

Industrial Flat Panels Basic

IFP Basic

Operating Instructions

03/2019

A5E46178354

- AB

Preface

Overview

Safety information

Installing and connecting the

device

Commissioning the device

Operating the device

Maintaining and servicing

your device

Technical information

Technical Support

Markings and symbols

List of abbreviations

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

Document order number: 6AV7862-2BC00-0AA0;6AV7862-2BD00-

0AA0;6AV7862

-2BE00-0AA0;6AV7862-2BF00-0AA0

Ⓟ

04/2019 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

IFP Basic

Operating Instructions, 03/2019, A5E46178354 - AB 3

Preface

These operating instructions contain all the information you need for commissioning and

operation of the SIMATIC Industrial Flat Panels (IFP) Basic.

It is intended both for programming and testing personnel who commission the device and

connect it with other units (automation systems, programming devices), as well as for service

and maintenance personnel who install add-ons or carry out fault/error analyses.

Basic knowledge required

A solid background in personal computers and Microsoft operating systems are required to

understand this manual. General knowledge in the field automation control engineering is

recommended.

Scope of the operating instructions

These operating instructions apply to the following Industrial Flat Panels:

Product name

MLFB

SIMATIC IFP1200 Basic

6AV7862-2BC00-0AA0

SIMATIC IFP1500 Basic

6AV7862-2BD00-0AA0

SIMATIC IFP1900 Basic

6AV7862-2BE00-0AA0

SIMATIC IFP2200 Basic

6AV7862-2BF00-0AA0

Scope of this documentation

The SIMATIC IFP Basic is supplied with the following documents:

●In printed form: Quick Install Guide which includes the device description, installation and

commissioning Instructions.

●Electronically as PDF file on the "Tools, Drivers, and Documentation" DVD: SIMATIC IFP

Basic operating instructions.

●Electronically as PDF that can be download from Product Support in SIOS. The updates

of the document will be published in SIOS.

Conventions

In these operating instructions, the SIMATIC IFP Basic is also referred to as "IFP Basic" or

"device".

A touch device generally refers to a device with a touch screen, as opposed to a pure

"display device". Touch screen is the general term for a capacitive multi-touch screen and

resistive single touch screen.

Preface

IFP Basic

4Operating Instructions, 03/2019, A5E46178354 - AB

At some places in these operating instructions, the general term "Windows Embedded

Standard" is used to refer to "Windows Embedded Standard 7" . "Windows 7" is used as an

abbreviation for "Windows 7 Ultimate".

Figures

This manual contains figures of the described devices. The supplied device may differ in

some details from the figures. Within some of the figures, one device is used to represent all

SIMATIC IFP Basic.

History

Edition

Comment

03/2019

First Edition

IFP Basic

Operating Instructions, 03/2019, A5E46178354 - AB 5

Table of contents

Preface ................................................................................................................................................... 3

1 Overview................................................................................................................................................. 7

1.1 Product description ...................................................................................................................7

1.2 Scope of delivery ......................................................................................................................8

1.3 Exterior design ..........................................................................................................................9

1.3.1 IFP Basic...................................................................................................................................9

1.3.2 Interfaces ................................................................................................................................10

1.4 Accessories.............................................................................................................................11

2 Safety information ................................................................................................................................. 12

2.1 General safety instructions .....................................................................................................12

2.2 Data protection........................................................................................................................14

2.3 Notes about usage..................................................................................................................14

3 Installing and connecting the device ...................................................................................................... 18

3.1 Preparing for installation .........................................................................................................18

3.1.1 Checking the delivery package...............................................................................................18

3.1.2 Identification data of the device ..............................................................................................20

3.1.3 Permitted mounting positions .................................................................................................21

3.1.4 Preparing the mounting cutout................................................................................................22

3.1.5 Checking clearances...............................................................................................................24

3.2 Installing the IFP Basic ...........................................................................................................25

3.2.1 Notes on installation................................................................................................................25

3.2.2 Secure with mounting clips .....................................................................................................26

3.2.3 Fastening a device using a VESA adapter .............................................................................28

3.3 Connecting the device ............................................................................................................30

3.3.1 Notes on connection ...............................................................................................................30

3.3.2 Earthing the device .................................................................................................................32

3.3.3 Connecting devices with 24 VDC 2-pin ..................................................................................33

3.3.4 Connecting IFP Basic to a PC ................................................................................................35

3.3.5 Connecting a USB device.......................................................................................................36

3.4 Installing the tool and driver....................................................................................................36

4 Commissioning the device .................................................................................................................... 39

5 Operating the device............................................................................................................................. 40

5.1 Operator input options ............................................................................................................40

5.2 Operating a device with resistive single touch screen............................................................41

5.3 Using the Brightness Adjustment Tool....................................................................................42

5.4 Using the touch driver .............................................................................................................43

Table of contents

IFP Basic

6Operating Instructions, 03/2019, A5E46178354 - AB

6 Maintaining and servicing your device ................................................................................................... 47

6.1 General information on maintenance and servicing .............................................................. 47

6.2 Cleaning the screen ............................................................................................................... 47

6.3 Spare parts and repairs ......................................................................................................... 48

6.4 Recycling and disposal .......................................................................................................... 48

7 Technical information............................................................................................................................ 49

7.1 Certificates and approvals ..................................................................................................... 49

7.2 Directives and declarations.................................................................................................... 51

7.2.1 ESD guideline ........................................................................................................................ 51

7.3 Dimension drawings............................................................................................................... 54

7.3.1 Dimension drawing of the IFP1200 Basic.............................................................................. 54

7.3.2 Dimension drawing of the IFP1500 Basic.............................................................................. 55

7.3.3 Dimension drawing of the IFP1900 Basic.............................................................................. 56

7.3.4 Dimension drawing of the IFP2200 Basic.............................................................................. 57

7.4 Rating plate ............................................................................................................................ 58

7.5 Technical specifications ......................................................................................................... 58

7.5.1 General technical specifications ............................................................................................ 58

7.5.2 Ambient conditions................................................................................................................. 60

7.5.2.1 Transport and storage conditions .......................................................................................... 60

7.5.2.2 Operating conditions .............................................................................................................. 61

7.5.2.3 Electromagnetic compatibility ................................................................................................ 62

7.5.2.4 Information on protection class and degree of protection...................................................... 64

7.6 Interface description............................................................................................................... 65

7.6.1 VGA interface......................................................................................................................... 65

7.6.2 24 VDC Power Supply ........................................................................................................... 65

7.6.3 DisplayPort............................................................................................................................. 66

7.6.4 USB interface, Type B ........................................................................................................... 67

7.6.5 USB interface, Type A ........................................................................................................... 67

A Technical Support................................................................................................................................. 68

A.1 Service and support ............................................................................................................... 68

A.2 Troubleshooting ..................................................................................................................... 69

B Markings and symbols .......................................................................................................................... 70

B.1 Safety-relevant symbols......................................................................................................... 70

C List of abbreviations .............................................................................................................................. 72

Glossary ............................................................................................................................................... 73

Index .................................................................................................................................................... 75

IFP Basic

Operating Instructions, 03/2019, A5E46178354 - AB 7

Overview

1.1

Product description

SIMATIC IFP Basic are touch monitors suitable for industrial use with a brilliant TFT (Thin

Film Transistor) display which can be connected to all SIMATIC IPCs as well as almost all

generally available PCs.

Features

●Rugged front

●Brilliant TFT display with a wide reading angle;

Resistive single touch screen in sizes 12", 15", 19" and 22"

●Can be placed up to 5 m from the IPC

●VGA and DisplayPort V1.2 interface

●Backlighting can be dimmed through software

●24 VDC power supply

Overview

1.2 Scope of delivery

IFP Basic

8Operating Instructions, 03/2019, A5E46178354 - AB

●Degree of protection IP65 for cabinet installation

●Up to 16 million colors

1.2

Scope of delivery

The product package includes the following components:

Name

Figure

Number

SIMATIC IFP Basic

Installation instructions

(Quick Install Guide)

Accessory kit

"Mounting clips

and

power supply connector"

"Tools, Drivers and Documenta-

tion" DVD

Overview

1.3 Exterior design

IFP Basic

Operating Instructions, 03/2019, A5E46178354 - AB 9

1.3

Exterior design

1.3.1

IFP Basic

This section describes the design of the monitor and touch devices, using the IFP1500 Basic

as an example.

Front view and side view

①

Display/touch screen

②

Interfaces

③

Recesses for mounting clips

Overview

1.3 Exterior design

IFP Basic

10 Operating Instructions, 03/2019, A5E46178354 - AB

Rear view

①

Rating plate

②

Holes for VESA mounting

③

Recesses for mounting clips

1.3.2

Interfaces

①

X80 connector for 24 VDC power supply

②

X72 VGA interface

③

X71 DisplayPort interface

④

X61, X62 USB 2.0 Type A

⑤

X60 USB 2.0 Type B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Touch-Screen Handbücher

Siemens

Siemens SIMATIC IFP1200 Basic Bedienungsanleitung

Beliebte Touch-Screen Handbücher anderer Marken

Elecro Engineering

Elecro Engineering Poolsmart Plus Montageanleitung

Crestron

Crestron TPMC-3SM Bedienungsanleitung

Racelogic

Racelogic MFD Touch Bedienungsanleitung

J2 580 Benutzerhandbuch

HAI

HAI OmniTouch 10p Bedienungsanleitung

panel

panel PC PSR108-FM Series Bedienungsanleitung

Tipro

Tipro FREE+ Bedienungsanleitung

Systemline

Systemline Commander Bedienungsanleitung

BeiJer

BeiJer T21C-C24 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E534869 Bedienungsanleitung

Dell

Dell C8618QT Bedienungsanleitung

Tipro

Tipro FREE+ 12.1" Bedienungsanleitung

Advantech

Advantech IDP31-215W Series Bedienungsanleitung

Element

Element VK Series Bedienungsanleitung

Johnson Controls

Johnson Controls Advanced Graphic Touchscreen Display Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2799L Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems 2020L Stücklistenhandbuch

Wiggly-Amps

Wiggly-Amps Engage Bedienungsanleitung