Siemens 1000 CA Bedienungsanleitung
SIEMENS
Teleprinter Model 1000 CA
Operating Instructions
CONTENTS Page
1 Teleprinter Model T1000 CA 1-1
2 Control elements 2-1
2.1 Keyboard 2-1
2.2 Manual communications controls 2-2
2.3 Manual device controls 2-2
3 Off-line mode 3-1
3.1 Basic key 3-1
3.2 Enciphering, using the buffer 3-2
3.3 Enciphering without buffer 3-3
3.4 Deciphering, using the buffer 3-4
3.5 Deciphering without buffer 3-6
3.6 Plain text 3-8
3.7 Preparation of a perforated tape 3-9
3.8 Verification of a perforated tape 3-11
3.9 Duplication of a perforated tape 3-12
3.10 Correction of a perforated tape by overpunching 3-14
3.11 Correction of a perforated tape by duplication 3-15
4. Line-connected mode 4-1
4.1 Transmission of an enciphered message from the tape 4-1
4.2 Transmission of an enciphered message from the cryptomemory 4-3
4.3 Transmission of plain text 4-5
4.4 Operation over dedicated circuits 4-7
4.5 Reception of a teleprinter message 4-8
4.6 Reception of enciphered text 4-8
4.7 Reception of plain text 4-9
5 Options 5-1
5.1 Function of CORR button 5-1
5.2 Correction during input for enciphering, using the buffer 5-1
5.3 Correction during input for deciphering, using the buffer 5-2
5.4 Plain text inserted ahead of message 5-4
5.5 Plain text added at end of message 5-4
5.6 Function of Zeroizing button 5-5
5.7 Battery drain indicator 5-5
5.8 Break-in procedure 5-5
6 Variant-dependent functions 6-1
6.1 Manual loading of message key 6-1
6.2 Page information 6-2
6.3 Omitting NNNN at end of message 6-2
6.4 Loading plain text into the storage, using the pedal 6-2
6.5 Plain text transmission, using the pedal 6-3
Zust.: 4 0-1 A22713-A1000-Y1 -*-761 9
Page
7 Replacing the paper roll 7_-|
8 Adjusting the line spacing, print force and telegraph speed 8-1
9 Replacing the paper tape roll 9_1
10 Replacing the ink ribbon 10-1
11 Replacing the print wheel 11_1
12 Cleaning the teleprinter 12-1
13 Functional test with test tape 13-1
14 Ordering data 14_1
Zust.: 4 0-2 . A22713-A1000-Y1-*-7619
1 TELEPRINTER MODEL 1000 CA
11 10
1 . Keyboard
2. Manual device controls
3- Manual communications controls
4. Tape punch
5. Punch control buttons
6. Tape reader
7. Crypto module
8. Security lock 2
9. Zeroizing button
10. Security lock 1
11. Battery drain indicator
Zust.: 5 1-1 A22713-A1000-Y1-*-7619
2 CONTROL ELEMENTS
2.1 Keyboard
Bell Run-out Carriage Return
The distant subscriber
is called to the tele
printer
The character last
entered is repeated as long
as this button is held de
pressed, except for New Line
New Line Line Feed Figures Shift
Who-are-you?
Identification code
(answerback) of distant
s t a t i o n i s s o l i c i t e d
and printed
Here-is
Identification code of
local station is trans
mitted and simultane
ously printed
Letters Shift
Only for correcting
a perforated tape
Space
Zust.: 5 2-1 A22713-A1000-Y1-*-76l 9
2.2 Manual communications controls
Eiaeai
Line button KS. Off-line button Off button
Not assigned
2.3 Manual device controls
0"0 red red green white white red yellow green
PROC P. S . ENCI OUTPUT M.P. PLAIN CORR DECI
Punch Standby button
All incoming messages are punched
into tape
PROC button
Depression of this button initiates the
enciphering process. Its release terminates
this process
P. S . b u t t o n
The POST SCRIPTUM mode permits plain
text to be inserted at the end of the
enciphered message
ENCI button
Beginning of enciphering process
OUTPUT button
The message held in the crypto-
memory is put out. Output is stopped
by operating this button during
message output
M. P. button
The message is transferred to the crypto-
memory
PLAIN button
Permits plain text operation in the
off-line mode
CORR button
The message put in for deciphering or
enciphering, using the buffer, can be
corrected character by character.
DECI button
Cut-over to the deciphering mode
Zust.: 4 2-2 A22713-A1000-Y1-*-76l9
3 OFF-LINE MODE
Off-line operation is interrupted by an incoming telex message.
At the end of the message, check the characters put in and re-insert
missing characters.
3.1 Basic key
Loading the basic key
V
EinEBI
1. Depress Off-line button Lamp comes on i
Printer carriage moves to
beginning-of-line position
Paper is advanced by one
line
Internal illumination is
turned on
V
• c = 3 OC=o
V
• c = 3 oC=o
2. Physical key S1
has to be inserted and
turned (for compartment
addresses A-W and Z)
3. Physical key S2
must be inserted in addition
and turned
(for compartment
addresses X and Y)
INSERT is printed
Only if required
No printout!
4. Enter compartment address
of basic key by means of
keyboard or perforated tape
Selected address is
printed
5. Enter key number, basic key
and CR or check word by
means of keyboard or per
forated tape
6. Press Carriage Return key
(only if a further basic key
is to be entered)
Key number and check word
are printed
No printout of basic key!
INSERT is printed
VV
o=3 Q C==o
7. Remove and store away
physical keys S1 and S2
II2L
V8. Press Off button
Note:
Lamp goes dark
If the basic key is entered by way of perforated
tape, the reader must be started several times.
Zust.: 4 3-1 A22713-A1000-Y1-*-7619
PREPARATION OF PERFORATED TAPE FOR BASIC KEYS
V
Ein EH I
1. Operate Off-line button Lamp comes on I
Printer carriage moves to
beginning-of-line position
Paper is advanced by one
line
V
PLAIN
2. Operate PLAIN button
Internal illumination is
turned on
Lamp PLAIN comes on
Paper is advanced by one
line
3. Operate punch On/Off
button Lamp comes on 0H
4. Hold Tape Feed-out button depressed until several LTRS
code combinations (5 x hole) have been punched
5. Enter address of basic key
compartment by means of
keyboard
Selected address is printed
and punched
6. Look up key number, basic
key and check word of key
list and enter by means of
keyboard
Key number, basic key and
check word are printed
and punched
Zust.: 4 3-1A A22713-A1000-Y1-*-76l 9
7. Hold Tape Feed-out button depressed until several LTRS
code combinations (5 x hole) have been punched
-
8. Operate Carriage Return key
The next basic key can now
be processed
INSERT is printed
9. Tear off tape upwards
V
PLAIN
V
E1EDEBI
10. Operate PLAIN button
11. Operate Off button
Lampe PLAIN goes dark
Lamps in Off-line button
and punch On/Off button |
go dark
Note:
LF and CR may not occur in the text.
The individual basic keys must be clearly separated
by LTRS code combinations.
Punch basic keys into a colored, durable tape.
Zust.: 4 3-1B A22713-A1000-Y1-*-76l 8
3.2 Enciphering, using the buffer
V
V
PROC
1. Operate Off-line button
2. Operate PROC button
Lamp comes on
Printer carriage moves to
beginning-of-line postion
Paper is advanced by one
line
Internal illumination is
turned on
Lamp PROC lights up
Paper is advanced by one
line
SELECT is printed
V
M.P.
3. Operate M. P. button
4. Enter address of basic key
compartment by means of
keyboard
Lamp M.P. lights up
Key compartment address,
number of key and check
word are printed
CR and
15 x LF are carried out
V
ENCI
5. Press ENCI button Lamp ENCI comes on
Lamp PROC goes out
10 slants III HUH I are
printed
6. Enter text by means of
keyboard or tape reader
Text is printed in plain
form
V
PROC
7. Operate PROC button Lamp ENCI goes dark
10 slants 11IIII III I are
printed
Note:
When the message memory is full, 10 slants 1111111111
are automatically printed
Zust.: 5 3-2 A22713-A1000-Y1-*-7618
Inhaltsverzeichnis
Andere Siemens Schreibmaschine Handbücher
Beliebte Schreibmaschine Handbücher anderer Marken
IBM
IBM Selectric II Bedienungsanleitung
Panasonic
Panasonic KX-R530 - Electronic Typewriter Bedienungsanleitung
Brother
Brother AX-425 Bedienungsanleitung
Olivetti
Olivetti LINEA 88 Bedienungsanleitung
Remington Rand Inc.
Remington Rand Inc. Noiseless 10 Bedienungsanleitung
Scheidegger
Scheidegger TYPOMATIC-TMS Handbuch
