For Product Service on this model,
Please Call 603-610-3000
27100 SW Parkway Ave.
Wilsonville, OR 97070 USA
sigsauer.com
P/N 7403260-01 R00
SIG SAUER Electro-Optics Innite Guarantee™
Sig Sauer has manufactured the most rugged, dependable
high-performance firearms for over two centuries. Our heritage
of design, engineering and precision-manufactured quality
predates the existence of any other optics company worldwide.
We understand the importance of quality in the line of fire, at
the shooting range or on your next hunt. Sig Sauer Electro-Optics had to earn
the right to wear that badge and the Infinite Guarantee has your back, forever.
Period.
We will repair or replace your SIG SAUER product in the event it becomes
damaged or defective, at no charge to you. If we cannot repair your product, we
will replace it with a product in perfect working order of equal or better physical
condition. It doesn’t matter how it happened, whose fault it was, or where you
purchased it.
SIG SAUER Innite Guarantee™
• Unlimited Lifetime Guarantee
• No Receipt Required
• Fully Transferable
• No Time Limit Applies
• No Warranty Card Required
• No Charge
If you ever have a problem, no matter the cause, we promise to take care of you
when it counts. Please note that our Infinite Guarantee does not provide
coverage for intentional damage, misuse, cosmetic damage that does not affect
the performance of the optic, loss, theft or unauthorized repair or modification.
Excludes electronic components.
SIG SAUER Electronic & Tritium Component
Limited 5-Year Warranty
For components not included under the SIG SAUER®Infinite
Guarantee™, this warranty covers any defects in materials
and workmanship in the electronic and Tritium components
of illuminated riflescopes/sights, pistol sights, electronic sights, flashlights,
lasers, binoculars, spotting scopes, and rangefinders. This warranty lasts for
five years from the date of manufacture. If, during that five-year period, these
products are found to have electronic or Tritium component defects in materials
or workmanship, SIG SAUER will repair your product, at no charge to you. If we
cannot repair your product, we will replace it with a product in perfect working
order of equal or better physical condition.
I
N
F
I
N
I
T
E
G
U
A
R
A
N
T
E
E
S
I
G
S
A
U
E
R
L
I
M
I
T
E
D
5
Y
E
A
R
W
A
R
R
A
N
T
Y
E
L
E
C
T
R
O
N
I
C
&
T
R
I
T
I
U
M
FOXTROT1X SPECIFICATIONS
Dimensions 2.4” L x 1.2” W x 1.3” H
Weight without battery 1.8 oz
Peak Lumen Output 450
Battery (1) CR123A Lithium
Activation Switch Type Side Switches w/ Momentary and
Latching Modes
Water Resistance IPX7
NOTICE: Export restrictions may apply –
This product may be controlled either by the ITAR or EAR.
WARNING:
CANCER AND REPRODUCTIVE HARM—www.P65warnings.ca.gov
INSTALLATION:
1. Use a athead screwdriver to turn the cross bolt head counterclockwise
until it is stopped by the E-clip on the end of the bolt.
2. The rail interface insert piece can be slid forward or back in 4 micro-
adjustment positions, for maximum location adjustment of the light on
the rail.
3. Press the head of the cross bolt to open up the rail clamp to it’s maximum
width.
4. Place the xed side of the rail clamp against the rearm rail and swing
the light into position until the recoil lug of the rail interface insert piece is
resting completely inside a slot in the rearm rail and release the tension
on the cross bolt head so that the rail mount keeper grabs onto the rail.
5. While pushing forward on the FOXTROT1X (toward the rearm muzzle),
turn the cross bolt head clockwise completely until the FOXTROT1X is
secured onto the rail and cannot be moved forward or back.
OPERATION:
The FOXTROT1X has press-in activation switches on both sides of the flashlight
housing. There are 2 modes of operation:
• Momentary Mode - Press and hold either activation switch. The light will
stay on until you release the activation switch.
• Latching Mode - Press and release either activation switch within 1/4
second. The light will stay on continuously until either activation switch is
pressed and released again.
The FOXTROT1X contains a lockout feature, to prevent unintended activation
of the light during storage or transport when a battery is installed. Turn the
bezel approximately 1/4 turn counterclockwise. Press either activation switch, to
determine if the lockout feature is properly set. The light should not turn on. If it
does, continue turning the bezel counterclockwise until the light turns off.
The FOXTROT1X will produce its peak brightness output upon initial activation,
when using a fresh battery. If left on continuously, the light will get very warm and
the brightness will gradually taper down over time, but will continue to produce
usable levels of light for over 1.5 hours, or until a fresh battery is installed.
CLEANING & MAINTENANCE:
After repeated fire, the lens may become clouded with gunpowder residue. For
best results, it is recommended that this area be cleaned, along with the firearm,
after each use. To clean the lens, follow these steps:
1. Keep rearm pointed in a safe direction
2. Ensure rearm is unloaded
3. Conrm light is o
4. In a small circular pattern use a soft, degreased, lint-free cloth to clean
the lens. Be sure to clean around lens edge.
Firearm should be cleaned and lubricated exactly as directed in your firearm
owner’s manual. Submerging, Flushing, and or Excess lubrication, can interfere
with the proper function of both firearm and FOXTROT1X™ Pistol Mounted
White Light.
