SIGMA TEK CP 313 Bedienungsanleitung
CP 313
S-DIAS CPU Module
Operating Manual
Date of creation: 24.10.2019
Version date: 29.05.2020
Article number: 20-004-313-E
Publisher: SIGMATEK GmbH & Co KG
A-5112 Lamprechtshausen
Tel.: +43/6274/4321
Fax: +43/6274/4321-18
WWW.SIGMATEK-AUTOMATION.COM
Copyright © 2019
SIGMATEK GmbH & Co KG
Translation from German
All rights reserved. No part of this work may be reproduced, edited using an electronic system, duplicated or
distributed in any form (print, photocopy, microfilm or in any other process) without express permission.
We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible
for technical or printing errors in this handbook and assumes no responsibility for damages that occur through its
use.
S-DIAS CPU MODULE CP 313
29.05.2020 Page 1
S-DIAS CPU Module CP 313
with 1 Ethernet
1 EtherCAT Drive Controller
1 VARAN Out
1 USB Device
1 microSD
1 USB Host
1 CAN
The S-DIAS CP 313 CPU module is a high-performance
processor unit for the S-DIAS I/O modules. Through the
various interfaces, such as Ethernet, EtherCAT, VARAN,
CAN bus, USB and an exchangeable microSD card, this
module can be used for a variety of applications.
Additionally, a RealTimeClock and zero voltage proof
RAM space with buffer battery are provided.
The CPU and the I/O modules are powered by the
integrated power supply module.
CP 313 S-DIAS CPU MODULE
Page 2 29.05.2020
Contents
1Introduction............................................................................. 5
1.1 Target Group/Purpose of this Manual ........................................5
1.2 Important Reference Documentation .........................................5
1.3 Contents of Delivery.....................................................................5
2Basic Safety Guidelines......................................................... 6
2.1 Symbols Used...............................................................................6
2.2 Disclaimer......................................................................................7
2.3 General Safety Guidelines ...........................................................8
3Norms and Guidelines............................................................ 9
3.1 Guidelines......................................................................................9
3.1.1 EU Declaration of Conformity..............................................................9
4Technical Data .......................................................................10
4.1 Performance Data.......................................................................10
4.2 Standard Configuration..............................................................11
4.3 Electrical Requirements.............................................................12
4.3.1 Module Supply (Input) .......................................................................12
4.3.2 S-DIAS Bus Supply (Output) .............................................................12
4.4 Miscellaneous .............................................................................14
4.5 Environmental Conditions.........................................................14
5Mechanical Dimensions........................................................15
S-DIAS CPU MODULE CP 313
29.05.2020 Page 3
6Connector Layout..................................................................16
6.1 Status LEDs Interface Part.........................................................17
6.2 Status LEDs Supply Part............................................................18
6.3 Connectors..................................................................................19
6.4 Applicable Connector Cables....................................................22
6.5 Applicable Connectors...............................................................23
6.6 Label Field ...................................................................................24
7CAN Bus Setup......................................................................25
7.1 CAN Bus Station Number ..........................................................25
7.2 Number of CAN Bus Participants..............................................25
7.3 CAN Bus Data Transfer Rate .....................................................25
7.4 CAN Bus Termination.................................................................26
8Buffer Battery ........................................................................27
9Wiring.....................................................................................28
9.1 Wiring Example...........................................................................28
9.2 Note..............................................................................................29
9.3 Shielding......................................................................................30
9.4 ESD Protection............................................................................30
10 Process Diagram...................................................................31
11 Status and Error Messages..................................................32
12 Application Exceptions.........................................................40
CP 313 S-DIAS CPU MODULE
Page 4 29.05.2020
12.1 The File System does not Support Safe Writing through SRAM
......................................................................................................40
12.2 Data Breakpoint ..........................................................................40
13 Strain Relief............................................................................41
14 Recommended Shielding......................................................42
14.1 Wiring from the Control Cabinet to an External Component.43
14.2 Wiring Outside of the Control Cabinet .....................................44
14.3 Interference SourcesShielding for Wiring Within the Control
Cabinet.........................................................................................45
14.4 Connecting Noise Generating Components............................46
14.5 Shielding Between Two Control Cabinets ...............................47
15 Working with and on the CP 313 ..........................................48
16 Transport/Storage..................................................................48
17 Mounting.................................................................................49
18 Maintenance...........................................................................51
18.1 Service.........................................................................................51
18.2 Repair...........................................................................................51
19 Disposal..................................................................................52
S-DIAS CPU MODULE CP 313
29.05.2020 Page 5
1 Introduction
1.1 Target Group/Purpose of this Manual
This manual contains all information required for operating the CP 313.
This manual is intended for:
•Project planners
•Technicians
•Commissioning engineers
•Machine operators
•Maintenance/test technicians
General knowledge of automation technology is required.
Further help and training information, as well as the appropriate accessories can be found
on our website www.sigmatek-automation.com
Our support team is happily available to answer your questions.
Please see our website for our hotline number and business hours.
1.2 Important Reference Documentation
•Design specification VARAN
These documents can be downloaded from our website or obtained through SIGMATEK
Support.
1.3 Contents of Delivery
1x CP 313
1x opposing connector
On receipt and before first use, check the device for damage. If the device
is damaged, contact our customer service and do not install it in your
system.
Damaged components can disturb or damage the system.
CP 313 S-DIAS CPU MODULE
Page 6 29.05.2020
2 Basic Safety Guidelines
2.1 Symbols Used
The following symbols are used in the operator documentation for warning and danger
messages, as well as informational notes:
DANGER
Identifies an immediate danger with high risk, which will lead to immediate
death or serious injury if not avoided.
WARNING
Identifies a possible danger with a mid-level risk, which can lead to death or
(serious) injury if not avoided.
CAUTION
Identifies a low risk danger, which can lead to injury or property damage if
not avoided.
Provides user tips, informs of special features and identifies especially
important information in the text.
Danger for ESD-sensitive components
S-DIAS CPU MODULE CP 313
29.05.2020 Page 7
2.2 Disclaimer
The contents of this document were prepared with the greatest care.
However, deviations cannot be ruled out. This document is regularly
checked and required corrections are included in the subsequent versions.
The machine manufacturer is responsible for the proper assembly, as well
as device configuration. The machine operator is responsible for safe
handling, as well as proper operation.
The current document can be found on our website. If necessary, contact
our support.
Subject to technical changes, which improve the performance of the
devices. The following documentation is purely a product description. It
does not guarantee properties under the warranty.
Please thoroughly read the corresponding data sheets, operating
instructions and this system handbook before handling a product.
SIGMATEK GmbH & Co KG is not liable for damages caused through
non-compliance with these instructions or applicable regulations.
The general and special safety instructions described in the following
sections, as well as technical regulations, must therefore be observed.
CP 313 S-DIAS CPU MODULE
Page 8 29.05.2020
2.3 General Safety Guidelines
According to EU Guidelines, the operating instructions are a component of
a product.
This manual must therefore be accessible in the vicinity of the machine
since it contains important instructions.
This technical documentation should be included in the sale, rental or
transfer of the product, or its online availability indicated.
Maintain this manual in readable condition and keep it accessible for
reference.
Operate the unit with devices and accessories approved by SIGMATEK
only.
Handle the device with care and do not drop or let fall.
Prevent foreign bodies and fluids from entering the device.
The device must not be opened, otherwise it could be damaged!
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere SIGMA TEK Computerhardware Handbücher
SIGMA TEK
SIGMA TEK CP 731 Bedienungsanleitung
SIGMA TEK
SIGMA TEK FDD 3000 Bedienungsanleitung
SIGMA TEK
SIGMA TEK C-DIAS CSCP 012 Bedienungsanleitung
SIGMA TEK
SIGMA TEK CP 212-1 Bedienungsanleitung
SIGMA TEK
SIGMA TEK CP 311 Bedienungsanleitung
SIGMA TEK
SIGMA TEK SIB 061 Bedienungsanleitung
SIGMA TEK
SIGMA TEK S-DIAS AI 084 Bedienungsanleitung
SIGMA TEK
SIGMA TEK CP 733 Bedienungsanleitung
SIGMA TEK
SIGMA TEK C-IPC Bedienungsanleitung
SIGMA TEK
SIGMA TEK CP 111-1 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
