SIGMA TEK CP 733 Bedienungsanleitung
CP 733
S-DIAS CPU Unit
Technical Manual
Date of creation: 06.12.2019
Version date: 06.12.2019
Article number: 20-004-733-E
Publisher: SIGMATEK GmbH & Co KG
A-5112 Lamprechtshausen
Tel.: +43/6274/4321
Fax: +43/6274/4321-18
WWW.SIGMATEK-AUTOMATION.COM
Copyright © 2019
SIGMATEK GmbH & Co KG
Translation from German
All rights reserved. No part of this work may be reproduced, edited using an electronic system, duplicated or dis-
tributed in any form (print, photocopy, microfilm or in any other process) without express permission.
We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible
for technical or printing errors in this handbook and assumes no responsibility for damages that occur through its
use.
S-DIAS CPU UNIT CP 733
06.12.2019 Page 1
S-DIAS CPU Unit CP 733
with 1 Ethernet
2 VARAN Out (2 VARAN Managers)
1 EtherCAT Master
1 CAN
1 USB 3.0
1 USB Device 2.0 (Micro USB Type B)
1 microSD Card
1 S-DIAS
The S-DIAS CPU unit 733 is an industrial PC with an Intel
Atom E3827 processor.
The CPU unit is used to control S-DIAS modules and has
various interface connections such as CAN, Gigabit Ether-
net, EtherCAT Master and with two VARAN Out interfaces.
14 status LEDs directly on the CPU unit provide current
CPU status information. A microSD card can be used to
store program memory. The CP 733 can be operated with
two independent VARAN Managers.
The CP 733 does not currently support visualization via VNC, LRM etc.
CP 733 S-DIAS CPU UNIT
Page 2 06.12.2019
Contents
1Introduction............................................................................. 5
1.1 Target Group/Purpose of this Manual ........................................5
1.2 Important Reference Documentation .........................................5
1.3 Contents of Delivery.....................................................................5
2Basic Safety Guidelines......................................................... 6
2.1 Symbols Used...............................................................................6
2.2 Disclaimer......................................................................................7
2.3 General Safety Guidelines...........................................................8
3Residual Risks ........................................................................ 9
3.1 Guidelines......................................................................................9
3.1.1 EU Declaration of Conformity..............................................................9
4Technical Data .......................................................................10
4.1 Performance Data.......................................................................10
4.2 Standard Configuration..............................................................11
4.3 Electrical Requirements.............................................................11
4.4 Temperature Sensor...................................................................13
4.5 Miscellaneous .............................................................................14
4.6 Environmental Conditions.........................................................14
5Mechanical Dimensions........................................................15
6Connector Layout..................................................................16
S-DIAS CPU UNIT CP 733
06.12.2019 Page 3
6.1 Connectors..................................................................................18
6.2 Applicable Connectors...............................................................20
7Wiring Guidelines..................................................................21
7.1 Ground.........................................................................................21
7.2 Shielding......................................................................................21
7.3 ESD Protection............................................................................21
8CAN Bus Setup......................................................................22
8.1 CAN Bus Station Number ..........................................................22
8.2 Number of CAN Bus Participants..............................................22
8.3 CAN Bus Data Transfer Rate .....................................................23
9CAN Bus Termination ...........................................................24
10 Buffer Battery ........................................................................25
11 Exchanging the Battery ........................................................26
11.1 Exchanging the Battery: 1. Option............................................26
11.2 Exchanging the Battery: 2. Option............................................27
12 Process Diagram...................................................................28
13 Recommended Shielding .....................................................29
13.1 Wiring from the Control Cabinet to an External Component.30
13.2 Wiring Outside of the Control Cabinet .....................................31
13.3 Shielding for Wiring Within the Control Cabinet .....................32
13.4 Connecting Noise Generating Components............................33
CP 733 S-DIAS CPU UNIT
Page 4 06.12.2019
13.5 Shielding Between Two Control Cabinets ...............................34
14 Transport/Storage..................................................................34
15 Status and Error Messages...................................................35
16 Mounting.................................................................................42
16.1 Dismounting................................................................................44
17 Maintenance...........................................................................45
17.1 Service.........................................................................................45
17.2 Repair...........................................................................................45
18 Disposal..................................................................................45
S-DIAS CPU UNIT CP 733
06.12.2019 Page 5
1 Introduction
1.1 Target Group/Purpose of this Manual
This manual contains all information required for operating the CP 733.
This manual is intended for:
•Project planners
•Technicians
•Commissioning engineers
•Machine operators
•Maintenance/test technicians
General knowledge of automation technology is required.
Further help and training information, as well as the appropriate accessories can be found
on our website www.sigmatek-automation.com
Our support team is happily available to answer your questions.
Please see our website for our hotline number and business hours.
1.2 Important Reference Documentation
•Design specification VARAN
These documents can be downloaded from our website or obtained through SIGMATEK
Support.
1.3 Contents of Delivery
1x CP 733
1x opposing connector
This document can be downloaded from our website.
Additional documents may be included with delivery.
CP 733 S-DIAS CPU UNIT
Page 6 06.12.2019
2 Basic Safety Guidelines
2.1 Symbols Used
The following symbols are used in the operator documentation for warning and danger
messages, as well as informational notes:
DANGER
Identifies an immediate danger with high risk, which will lead to immediate
death or serious injury if not avoided.
Identifie un danger immédiat avec un risque élevé, entraînant le décès
immédiat ou des blessures graves s’il n’est pas évité
WARNING
Identifies a possible danger with a mid-level risk, which can lead to death or
(serious) injury if not avoided.
Indique un danger possible d’un risque moyen de décès ou de (graves)
blessures si les consignes de sécurité ne sont pas respectées
CAUTION
Identifies a low risk danger, which can lead to injury or property damage if
not avoided.
Indique un danger avec un niveau de risque faible des blessures légères ou
des dommages matériels si les consignes de sécurité ne sont pas re-
spectées
Hot surface warning.
Provides user tips, informs of special features and identifies especially
important information in the text.
Fournit des conseils d’utilisation, informe sur les fonctions particulaires et
souligne les informations particulièrement importantes dans le texte.
Danger for ESD-sensitive components.
Les signes de danger pour les composants sensibles aux décharges élec-
trostatiques.
S-DIAS CPU UNIT CP 733
06.12.2019 Page 7
2.2 Disclaimer
The contents of this document were prepared with the greatest care. How-
ever, deviations cannot be ruled out. This document is regularly checked
and required corrections are included in the subsequent versions. The
machine manufacturer is responsible for the proper assembly, as well as
device configuration. The machine operator is responsible for safe han-
dling, as well as proper operation.
The current document can be found on our website. If necessary, contact
our support.
Subject to technical changes, which improve the performance of the devic-
es. The following documentation is purely a product description. It does not
guarantee properties under the warranty.
Please thoroughly read the corresponding data sheets, operating instruc-
tions and this system handbook before handling a product.
SIGMATEK GmbH & Co KG is not liable for damages caused through
non-compliance with these instructions or applicable regulations.
The general and special safety instructions described in the following sec-
tions, as well as technical regulations, must therefore be observed.
CP 733 S-DIAS CPU UNIT
Page 8 06.12.2019
2.3 General Safety Guidelines
According to EU Guidelines, the operating instructions are a component of
a product.
This manual must therefore be accessible in the vicinity of the machine
since it contains important instructions.
This technical documentation should be included in the sale, rental or trans-
fer of the product, or its online availability indicated.
Maintain this manual in readable condition and keep it accessible for refer-
ence.
Operate the unit with devices and accessories approved by SIGMATEK
only.
CAUTION
Handle the device with care and do not drop or let fall.
Prevent foreign bodies and fluids from entering the device.
The device must not be opened, otherwise it could be damaged!
Manipulez l’appareil avec précaution et ne le laissez pas tomber.
Empêchez les corps étrangers et les liquides de pénétrer dans l’appareil.
L’appareil ne doit pas être ouvert, sinon il risque d’être endommagé!
Andere Handbücher für CP 733
1
Inhaltsverzeichnis
Andere SIGMA TEK Industrie-PC Handbücher
Beliebte Industrie-PC Handbücher anderer Marken
Dell
Dell Embedded Box PC 5000 Bedienungsanleitung
IBASE Technology
IBASE Technology ASB200-918 Series Bedienungsanleitung
Lenovo
Lenovo ThinkCentre M90q Betriebsanleitung
IXXAT
IXXAT Econ 100 Bedienungsanleitung
Kontron
Kontron KBox A-151-TGL Bedienungsanleitung
AXIOMTEK
AXIOMTEK ICO500-518 Series Bedienungsanleitung