Signady SCU91T Bedienungsanleitung

SCU91T

4K Scaler Switcher (with PoH)

Version: SCU91T_2017V1.0

User Manual

4K Compact Scaler Switcher (with PoH)

Preface

Read this user manual carefully before using the product. Pictures shown in this manual

is for reference only. Different models and specifications are subject to real product.

This manual is only for operation instruction only. The functions described in this version

are updated till June 20, 2017. In the constant effort to improve our product, we reserve

the right to make functions or parameters changes without notice or obligation. Please

refer to the dealers for the latest details.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in which

case the user at their own expense will be required to take whatever measures may be

necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

4K Compact Scaler Switcher (with PoH)

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing material for

possible future shipment

Follow basic safety precautions to reduce the risk of fire, electrical shock and

injury to persons.

Do not dismantle the housing or modify the module. It may result in electrical

shock or burn.

Using supplies or parts not meeting the products’ specifications may cause

damage, deterioration or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain, moisture or install

this product near water.

Do not put any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheat.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage.

If an object or liquid falls or spills on to the housing, unplug the module

immediately.

Do not twist or pull by force ends of the cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

Unplug the power cord when left unused for a long period of time.

Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

4K Compact Scaler Switcher (with PoH)

Contents

1. Introduction........................................................................................................................................ 1

1.1 Introduction to SCU91T............................................................................................................1

1.2 Feature.....................................................................................................................................1

1.3 Package List.............................................................................................................................2

2. Specification...................................................................................................................................... 3

3. Panel Description............................................................................................................................... 4

3.1 Front Panel...............................................................................................................................4

3.2 Rear Panel...............................................................................................................................5

4. System Connection............................................................................................................................ 7

4.1 Usage Precautions...................................................................................................................7

4.2 System Diagram.......................................................................................................................7

4.3 Microphone Connection............................................................................................................7

5. Button Control...................................................................................................................................10

5.1 Manual Switching ...................................................................................................................10

5.2 Auto Switching........................................................................................................................10

5.3 Volume Adjustment.................................................................................................................10

6. IR Control.........................................................................................................................................11

6.1 IR Remote Control..................................................................................................................11

6.2 IR Pass-through Control .........................................................................................................12

6.2.1 To Control Far-end Source/Display..............................................................................12

6.2.2 To Control Local Source/Display..................................................................................12

7. RS232 Control..................................................................................................................................13

7.1 RS232 Connection .................................................................................................................13

7.2 RS232 Control Software.........................................................................................................13

7.3 RS232 Commands .................................................................................................................15

8. GUI Control.......................................................................................................................................18

8.1 Control Menu..........................................................................................................................19

8.2 Volume Menu .........................................................................................................................20

8.3 Configuration Menu................................................................................................................21

8.4 Password Menu......................................................................................................................23

8.5 GUI Update............................................................................................................................23

9. OSD Control .....................................................................................................................................24

10. Panel Drawing ................................................................................................................................25

11. Troubleshooting & Maintenance......................................................................................................26

12. Customer Service ...........................................................................................................................27

4K Compact Scaler Switcher (with PoH)

1. Introduction

1.1 Introduction to SCU91T

The SCU91T is a 9 inputs multi format A/V presentation auto 4k Scaler Switcher that

scales video signals to HDMI and HDBaseT outputs simultaneously. The HDBaseT

output supports PoH and can connect to a compatible HDBaseT Receiver up to a

maximum of 100 meters / 328 feet.

With 1 IR ALL IN and 1 IR ALL OUT, the IR control signals can be transmitted

bi-directionally between the SCU91T and compatible HDBaseT Receiver or HDBaseT

Transmitter.

The SCU91T can be controlled either by front panel buttons, IR Remote, RS232 or GUI.

With a microphone input that supports phantom power and a balanced stereo audio

output for audio reinforcement, the SCU91T can handle a myriad of A/V applications.

1.2 Feature

Compliant with HDMI2.0& HDCP2.2.

Supports video source auto-switching function.

HDBaseT input with distances up to 230 ft (70m) at 1080p and 131 ft (40m) at

4Kx2K on a single CAT5e/6/7 cable.

HDBaseT output with distances up to 328 ft (100m) at 1080p and 230ft (70m) at

4Kx2K on a single CAT5e/6/7 cable.

Output resolutions selectable to assure preferred output, and supports various

output resolutions, such as 1280x720(default), 1920x1080, 1024x768,

3840x2160@30Hz, 3840x2160@60Hz.

DP, HDMI and VGA video inputs can be embedded with external audio.

Support Line or Mic audio inputs, and MIC port supports balance/unbalance signal,

suppress the external noise effectively.

Controllable via buttons, IR Remote, RS232 & GUI.

Powerful OSD function.

Bi-directional IR & RS232 pass-through.

Supports online software upgrading.

4K Compact Scaler Switcher (with PoH)

1.3 Package List

Scaler Switcher

1 x SCU91T Scaler Switcher

2 x Mounting Ears with 4 Screws

4 x Plastic Cushions

1 x IR Remote

1 x IR Receiver

1 x IR Emitter

6 x 3-Pin Phoenix Connectors

1 x 5-Pin Phoenix Connector

1 x RS232 Cable (3-Pin to DB9)

1 x Power Cord

HDBaseT Receiver

1 x TPUH421R HDBaseT Receiver

2 x Mounting Ears with 4 Screws

4 x Plastic Cushions

1 x RS232 Cable (3-Pin to DB9)

1 x User Manual

Note: Please contact your distributor immediately if you found any damage or defect in

the components.

4K Compact Scaler Switcher (with PoH)

2. Specification

Video

Video Input

(1) HDBaseT;(1) Display Port; (5) HDMI; (2) VGA

Video Input Connector

(1) RJ45; (1) Female Display Port; (5) Type A HDMI;

(2) 15-pin Female VGA

Video Output

(1) HDMI; (1) HDBaseT

Video Output Connector

(1) Type A HDMI; (1) RJ45

Output Resolution

1280x720 (default), 1920x1080, 1024x768, 3840x2160@30Hz,

3840x2160@60Hz

Standards

Input video support HDMI 2.0 & HDCP2.2;

Output video support HDMI 2.0 & HDCP1.4.

Audio

Audio Input

(1) Stereo Audio Input for 2-DP; (1) Stereo Audio Input for

3-HDMI; (2) Stereo Audio Inputs for 8-VGA and 9-VGA;

(1) LINE Audio; (1) MIC Audio

Audio Input Connector

(4) 3.5mm Stereo Jacks; (2) 3-pin Phoenix Connector

Audio Input Impedance

>10kΩ

Audio Output

(1) Dual-Mono Analog Audio;

(1) Power Amplifier with Fixed Voltage

Audio Output Connector

(1) 5-pin Phoenix Connector; (1) 3-pin Phoenix Connector

Audio Output Impedance

70Ω

Frequency Response

20Hz~20K Hz

Stereo Channel Separation

>80dB @1KHz

Control Part

Control Port

(1) FIRMWARE; (1) IR EYE; (1) IR ALL IN; (1) IR ALL OUT;

(3) RS232; (1) TCP/IP

Control Connector

(1) Type-A USB (3) 3.5mm Mini Jacks; (3) 3-pin Phoenix

Connectors; (1) RJ45

General

Transmission Distance

HDBaseT Input: 1080p≤70m, 4Kx2K≤40m;

HDBaseT Output: 1080p≤100m, 4Kx2K≤70m.

Operation Temperature

0 ~ +40℃

Storage Temperature

-10 ~ +55℃

Relative Humidity

10% ~ 90%

External Power Supply

100V~240V AC

Power Consumption

45W (Max)

Dimension (W*H*D)

436.4mm x 44mm x 276.5mm

Net Weight

3.17Kg

4K Compact Scaler Switcher (with PoH)

3. Panel Description

3.1 Front Panel

①Power Indicator:

Off when there is no power to the device.

Green when the device is in standby mode.

Red when the device is powered on.

②Auto switching mode selector and activity LED

③1-HDBT input selector and activity LED

④2-DP input selector and activity LED

⑤3-HDMI input selector and activity LED

⑥4-HDMI input selector and activity LED

⑦5-HDMI input selector and activity LED

⑧6-HDMI input selector and activity LED

⑨7-HDMI input selector and activity LED

⑩8-VGA input selector and activity LED

⑪9-VGA input selector and activity LED

⑫OUTPUT BACK/720P: Press this to let the display be black screen or long-press for

3 seconds to reset the output resolution to 1280×720p.

⑬MUTE: Press this to mute output.

⑭Volume Knob

Press this knob to select AMP (amplifier), SOURCE or MIC audio input, and then

turn the knob to adjust the volume.

VOLUME

2-DP 8-VGAAUTO 1-HDBT 7-HDMI

5-HDMI 6-HDMI OUTPUT BLACK

720P 3s\

4-HDMI MUTE

SOURCE

LINE

MIC

3-HDMI

12345678910 11 12 13 14

4K Compact Scaler Switcher (with PoH)

3.2 Rear Panel

INPUTS:

①1-HDBT/PoH& RS232:

HDBaseT input port: support PoH, connect with an HDBaseT Transmitter to

receive AV signal or IR/RS232 control signal.

The RS232 port and that one on HDBaseT Transmitter can transmit RS232

commands each other by pass-through function.

②2-DP: DP input with external audio input.

③3-HDMI: HDMI input port with external audio input, support 4k@60Hz 4:4:4, HDCP

2.2.

④4-HDMI~7-HDMI: 4 HDMI input ports, support 4k@60Hz 4:4:4, HDCP 2.2.

⑤8-VGA~9-VGA: 2 VGA input ports with VGA auxiliary audio inputs.

⑥LINE: Line audio input port.

⑦MIC: MIC audio input port. DIP switch for selecting the below 3 mode:

48V phantom power mode (connect with condenser microphone).

MIC mode (connect with dynamic microphone).

LINE mode (connect with wireless microphone or line audio).

OUTPUTS:

A. HDMI: HDMI video output port.

B. HDBT/PoH: Support PoH. Connect with an HDBaseT Receiver to transmit AV

signal or IR/RS232 control signal.

C. AUDIO: Audio output port, the audio comes from the input audio corresponding to

the selected video source and is mixed with MIC audio.

D. RS232: The RS232 port and that one on HDBaseT Receiver can transmit RS232

commands each other by pass-through function.

1234AB

abcdef D

567

4K Compact Scaler Switcher (with PoH)

CONTROL:

a. FIRMWARE: Type-A USB port for updating system firmware or loading customized

EDID data.

b. IR EYE: Connect with IR Receiver (with carrier wave only) to receive IR signal

send by IR Remote to control this Scaler Switcher.

c. IR ALL IN: IR input port used with far-end IR output port. Connect with IR Receiver

(with carrier) to receive IR signal from all kinds of IR Remote to control far-end

devices from local.

d. IR ALL OUT: IR output port used with far-end IR input port. Connect with IR emitter

(with carrier) to send IR signal to control local devices from remote.

e. RS232: Serial port, 3-pin phoenix connector, connect with a control device (such

as PC) to control SCU91T.

f. TCP/IP: Ethernet port, connect PC to control SCU91T via GUI.

I: AUDIO AMP: Audio output port, connect with 70V/100V constant voltage audio

amplifier.

II: AC100V-240V: Power port, connect to an AC 100V~240V power via the included

power cord.

Inhaltsverzeichnis

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung