5 Software
5.1 Software installation
Install application ST171 on android device from «Play.google.com»or «Play Маrkеt»application.
5.2 Description
Application consists from 5 sections:
2 main: «GENERAL OPTIONS», «DETECTION». Using of this assumes automatic and intuitive device
setup with no need in special knowledge in signal analysis.
3 subsidiaries, intended for advanced users: radio frequency setup («RF Options»), ultrasonic
settings («US Options») и«SPECTRUM».
Manual selection of sections is done from list, which can be found by pressing on appropriate icons on top
left and top right corners.
5.3 Section «GENERAL SETTINGS»
Working mode selection: «OFFICE», «CAR»or «MANUAL».
«STATUS»LED –when ticked-off indicator «STATUS»located on RM is not active.
Initially activated
.
«Vibration» - when ticked-off vibration is not active.
Initially activated
.
«Keep awake in the foreground mode» - when selecting this option with opened
application display will not turn off.
Iinitially activated.
«Alarm delay» - Delay is made for prevention of false alarms when moving the
device. Delay period is about 3 seconds. Disabling delay is convenient for testing.
Initially disabled.
«
Take a photo when alarm
»
- when ticked-on during alarm a photo will be taken
on smartphone camera. It can be useful in «CAR»mode in case of entering/exiting
of cars on parking or during the blockers control of cars moving along the highway.
Smartphone camera should be directed toward moving cars. Photos can be seen in Log of events. Initially
disabled
.
«
Get a location when alarm
» -
when ticked-on location of the smartphone will be defined. Location data will
be stored in Log of events with latitude, longitude and actual address.
«Background mode and Notification» When selecting this option application will work in background mode
and with turned-off display. Depending on smartphone model this option can be unavailable.
When selecting this option notification icon(«ST») will appear in statusbar of the smartphone. When signal
detected «Bell»notification will appear.
«Background Update Rate»- Background update rate of the RM is set.
Initially set for 2 seconds.
«Default» - returns device to default settings.
