1. Please read the manual carefully to understand the precautions and installation requirements;
2. It is ensured the installation environment and installation accessories meet the load-bearing requirements;
3. Check whether the delivered installation parts are damaged, and install them on the lamp reliably;
4. Different installation accessories correspond to different installation environments,
please do not use or modify at will;
5. If the installation accessories have auxiliary parts such as non-slip screws, etc.,
pay attention to its function and do not ignore it;
6. If there is vibration in the installation environment of the lamp,
a safety rope to prevent falling should be installed to ensure the reliability of the installation;
7. After completing the installation, check whether the components are reliable and effective.
1. Please read the product manual carefully to ensure that the use environment meets the requirements of the
manual before use;
2. This product should be installed by professionals;
3. Non-professionals must not maintain the product;
4. If the parts are damaged, they should be replaced by the manufacturer, service agent,
or similarly qualified personnel;
5. The use environment cannot exceed the specified anti-corrosion level.
If you have special requirements, please consult first;
6. If the lamp is installed in the northern hemisphere, the solar panel should face south as much as possible during
installation, and if it is in the southern hemisphere, the solar panel should face north during installation;
7. Please avoid buildings or trees when installing, so as not to affect the normal power generation efficiency of solar
panels, resulting in short working hours of lamps;
8. When installing, please avoid large billboards or mains lamps to to irradiate the solar panels,
which will cause the solar panels to perceive as daytime and cause the lamps not to work;
9. If the product is stored for a long time, the lamp needs to be charged at least once every six months,
and the lamp is placed outdoors during the day, with the solar panel facing the sun,
and charging is sufficient for 6-7 hours;
10. Please do not cover the light-emitting surface of the lamp with paper or cloth,
and the lamp should not be close to flammable materials.
11. It is forbidden to introduce external electrical signals into the lighting system.
External electrical signals may cause permanent damage to the equipment.
Installation requirements
Notice
