SII DPU-S445 SERIES Bedienungsanleitung

USER’S GUIDE

Thermal Printer

DPU-S445 SERIES

Read this user’s guide carefully before using the printer.

Keep this user’s guide in a place where it can be

accessed quickly.

Seiko Instruments Inc.

DPU-S445 SERIES THERMAL PRINTER USER’S GUIDE

Document Number: U00110291508

First Edition: April 2008

Second Edition: May 2008

Third Edition: July 2008

Fourth Edition: September 2008

Fifth Edition: October 2008

Sixth Edition: January 2009

Seventh Edition: July 2009

Eighth Edition: January 2010

Ninth Edition: July 2010

The information contained herein is the property of SII and shall not be reproduced in whole or in part

without prior written approval of SII.

SII reserves the right to make changes in the specifications and materials contained herein without

notice and shall not be responsible for any damages (including consequential) caused by reliance on

the materials presented, including but not limited to typographical, arithmetic, and listing errors.

is a trademark of Seiko Instruments Inc.

BHT-Ir is a trademark of DENSO CORPORATION

Bluetooth is registered trademarks of Bluetooth SIG, Inc.

All other trademarks are the properties of their respective companies.

This product complies with EU RoHS Directive(2002/95/EC).

Please refer to the page in Chinese for the information of the hazardous substances under China

RoHS（Management Methods for Controlling Pollution by Electronic Information Products）.

For use in Turkey

Complies with Electrical and Electronic Equipment Directive.

Türkiye’ deki Kullanıcılar için

EEE Yönetmeliğine Uygundur.

Applicable EC Directive and Standards

Product: Thermal Printer DPU-S445-01A-E

Directive: Title

1999/5/EC EC Radio and Telecommunications Terminal Equipment Directive

Standards

EN 301 489-1 V 1.6.1

EN 301 489-17 V 1.2.1

EN 300 328 V1.7.1

EN 60950-1

This product may be used in following all EU and EFTA countries:

EU Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, The Netherlands, United Kingdom

EFTA

Iceland, Norway, Switzerland, Liechtenstein

Product: Thermal Printer DPU-S445-00A-E, DPU-S445-01A-E

Directive: Title

2004/108/EC EC Electromagnetic Compatibility Directive

Standards

EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

Product: AC adapter PW-0904-W2-E

Directive: Title

2004/108/EC EC Electromagnetic Compatibility Directive

2006/95/EC EC Low Voltage Directive

Standards

EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 60950-1

Product: Battery Charger PWC-L07A1-W1-E

Directive: Title

2004/108/EC EC Electromagnetic Compatibility Directive

2006/95/EC EC Low Voltage Directive

Standards

EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 55024

EN 60950-1

Federal Communications Commission (FCC) compliance statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes in this certified device could void your legal right to operate it.

RF exposure compliance

1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at least

20 cm must be maintained between the antenna of this device and all persons.

2) This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Industry Canada (IC) compliance statement

Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

- 1-

INTRODUCTION

Thank you for purchasing the DPU-S445 thermal printer.

This USER’S GUIDE explains how to handle DPU-S445 thermal printer (hereinafter

referred to as printer), specified AC adapter, specified battery charger, specified battery

pack and specified AC cable (hereinafter, omit “specified”).

Read through the SAFETY PRECAUTIONS and OPERATING PRECAUTIONS

carefully before using the printer. Also read the instruction manuals of the optional

equipment that you purchased with the printer.

Keep this user’s guide in a place where it can be accessed quickly.

For more detailed technical information on this printer, refer to the DPU-S445 SERIES

THERMAL PRINTER TECHNICAL REFERENCE.

The User’s Guide consists of the following sections.

SAFETY PRECAUTIONS..............................................................................2

OPERATING PRECAUTIONS.......................................................................9

1 PREPARATION..................................................................................12

2 EACH PART OF PRINTER ................................................................13

3 POWER CONNECTION.....................................................................16

4 PAPER SETTING...............................................................................19

5 TEST PRINTING................................................................................21

6 FUNCTION SETTING ........................................................................22

7 CONNECTING TO THE HOST DEVICE............................................30

8 RECHARGING THE BATTERY PACK...............................................34

9 THERMAL HEAD MAINTENANCE ....................................................37

10 TROUBLESCHOOTING.....................................................................38

11 SPECIFICATIONS..............................................................................39

12 OPTIONS AND CONSUMABLE PARTS............................................42

- 2-

SAFETY PRECAUTIONS

The following symbols are used in this User’s Guide in order to make use of the printer

properly and prevent the printer from being damaged.

Follow the instructions marked with the symbol.

WARNING Failure to follow the guidelines marked with this

symbol could result in severe personal injury or

death.

CAUTION

Failure to follow the guidelines marked with this

symbol could result in minor personal injury or

product and/or peripheral damage.

Symbol Examples

The symbol indicates caution (including danger and warning).

The example on the left indicates warning or caution.

The symbol indicates prohibition.

The example on the left means prohibition of disassembling.

The symbol indicates requirement or what must be done.

The example on the left means “pull the power plug out of the outlet.”

- 3-

WARNING

DO NOT use the printer, the AC adapter, the AC cable and the battery

charger in countries where these items do not comply with the

regulations. See Section 11 SPECIFICATIONS, List of Compliance with

Regulation.

Doing so, we do not assure the safety of these products and you will be

responsible for violation of regulations.

POWER OFF the printer, unplug the power cable from the power outlet,

and remove the battery pack in any of the following cases:

The printer does not recover from an error.

Smoke, strange noise, overheat or smells erupt from the printer.

A piece of metal or any liquid touches the internal parts or slot of the

printer.

Case is broken.

Doing so may cause fire or electric shock. Please contact your vender to

repair the products.

DO NOT insert any foreign objects such as a piece of metal or any liquid

in the internal parts or slot of the printer.

Doing so may cause fire or electric shock.

DO NOT disassemble or remodel the printer. DO NOT REPAIR THE

PRINTER YOURSELF.

Doing so may cause fire, a failure or other accidents.

DO NOT use an AC adapter, AC cable, battery charger or battery pack

other than that which is specified.

Doing so may cause explosion, overheating or fire leading to serious

accidents.

DO NOT use any power supply of the AC adapter and the battery charger

other than specified range of one.

Doing so may cause fire, a failure or other accidents.

DO NOT touch the output terminal or metallic area of the connector to

avoid short-circuiting.

Doing so may cause fire, a failure or other accidents.

- 4-

DO NOT connect except specified battery pack with the battery charger.

Doing so may cause explosion, overheating or fire leading to fire or

injury.

DO NOT put the printer into water in a place where it could get wet.

Doing so may cause fire, a failure or other accidents.

DO NOT touch the printer by wet hand.

If not, it might cause electric shock.

POWER OFF the printer before removing/inserting the battery pack.

If not, it might cause electric shock.

UNPLUG the AC plug from the outlet when there is any AC cable of the

AC adapter or the battery charger damaged.

Doing so may cause fire, a failure or electric shock.

Keep the AC plug of the AC adapter or the battery charger away from

dust and metallic materials.

If not, it might cause fire or electric shock.

PLUG the AC plug of the AC adapter or the battery charger completely.

If not, it might cause fire or electric shock.

DO NOT destroy the AC cable or plug of the AC adapter or the battery

charger. Moreover, DO NOT bend, pull or twist the AC cable forcibly, or

place heavy object on the cable.

Doing so may cause fire, a failure or electric shock.

UNPLUG the AC cable of the AC adapter or the battery charger from the

outlet, do not pull on the cable but hold onto the plug.

Exposure or disconnection of the cable might cause fire or electric shock.

The antenna(s) used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be

co-located or operating in conjunction with any other antenna or

transmitter.

- 5-

CAUTION

If the printer is not used for a long time, unplug the AC plug from the

outlet and remove the battery pack from the printer.

If not, it might cause fire or electric shock.

When cleaning the printer, unplug the AC plug from the outlet and

remove the battery pack from the printer.

If not, it might cause fire or electric shock.

Keep the printer out of the reach of children.

If not, it might cause injury.

DO NOT subject the printer to the following places as it may lead to fire,

a failure or injury.

Places of direct sunlight or high temperature

Places of extreme humidity or any place where it can possibly be

splashed by any liquids.

Places with strong vibration or is inclined.

DO NOT cover the printer with any clothes.

Doing so may cause fire or a failure.

NEVER touch the thermal head immediately after printing because it

becomes very hot. Make sure that the thermal head is cool before

clearing a paper jam or cleaning the thermal head.

Doing so may cause injury.

NEVER touch the portions such as the thermal head or the paper sensor

or the platen roller directly while opening the paper cover to install the

paper for example.

Doing so may cause injury or other accidents.

Andere Handbücher für DPU-S445 SERIES

Inhaltsverzeichnis

Andere SII Drucker Handbücher

SII

SII IP-5610 Bedienungsanleitung

SII

SII DPU-30 Gebrauchs- und Pflegehandbuch

SII

SII IP-7900 Bedienungsanleitung

SII

SII IP-7700 Bedienungsanleitung

SII

SII DPU-S445-00A-E Bedienungsanleitung

SII

SII SLP720RT Series Bedienungsanleitung

SII

SII IP-5520 Bedienungsanleitung

SII

SII IP-7900-20 Bedienungsanleitung

SII

SII Color Painter W-64s Bedienungsanleitung

SII

SII IP-7700-02 Bedienungsanleitung

SII

SII IP-6600 Bedienungsanleitung

SII

SII LTP3445 Gebrauchs- und Pflegehandbuch

SII

SII SLP720RT Series Bedienungsanleitung

SII

SII IP-6900 Bedienungsanleitung

SII

SII RP-B10 Bedienungsanleitung

SII

SII MP-A40 SERIES Bedienungsanleitung

SII

SII IP-6620 Bedienungsanleitung

SII

SII RP-E10 Series Bedienungsanleitung

SII

SII DPU-S445 SERIES Gebrauchs- und Pflegehandbuch

SII

SII IP-7900 Bedienungsanleitung

SII

SII RP-D10 Series Bedienungsanleitung

SII

SII IP-6600-01 Bedienungsanleitung

SII

SII MTP Series Gebrauchs- und Pflegehandbuch

SII

SII DPU-S245 Gebrauchs- und Pflegehandbuch

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung