SIIG 1 FireWire 800 CardBus DV-Ki Bedienungsanleitung

FireWire 800 CardBus DV-Kit

Quick Installation Guide

04-0461B

Introducing the FireWire 800 DV-Kit

The FireWire 800 Cardbus DV-Kit is designed to add

FireWire 800 (1394b) and 1394a (6-pin) interfaces to your

notebook computer. For your convenience, one FireWire

(1394a) 6-pin/4-pin DV cable is included for connecting

DV camcorders and other 1394 devices using 4-pin

connector. Ulead VideoStudio video editing software is

also included for producing greeting cards, video

e-mails, or home videos complete with attractive titles,

effects, and background music.

Features and Benefits

• Provides 2 FireWire 800 (9-pin) and 1 FireWire 400

(6-pin) ports for multiple device connections

• Supports serial bus data transfer rates of 100, 200,

400 and 800 Mbps

• Hot-swappingallowsyoutoconnect/detachdevices

without turning your system off

• Works with DV camcorders, CD-RW/DVD-ROM

drives, scanners, FireWire hard disks, digital

cameras, video game systems and other

audio/video devices

System Requirements

• Pentium®III or equivalent notebook PC with an

available PC Card slot

• Windows®2000/XP (32-/64-bit)/Server 2003 (32-/

64-bit)/Vista (32-/64-bit)

For video capturing/editing:

•Pentium 4 or equivalent notebook PC

•256MB RAM (512MB for Vista) and 5GB or more

available hard disk drive space

PackageContents

•FireWire 800 CardBus DV-Kit adapter

•Driver CD

•Ulead VideoStudio DV editing software CD

•1394 6-pin/4-pin DV cable

•Quick Installation Guide

Layout

Figure 1. Layout

Note: 1394 devices that have their own power supply

donot require theoptional power adapterto be connected

in order to work. However, non-powered 1394 devices

require this optional power adapter to work. The power

adapter can be purchased at SIIG's online store.

FireWire 400

(6-pin)

Power Adapter Jack

FireWire 800

(9-pin)

FireWire 800

(9-pin)

Hardware Installation

General instructions for installing the card are provided

below. Since the design of notebook computers may

vary, refer to your system’s reference manual for further

information, if needed.

1. Power off your notebook computer and any other

connected peripheral devices.

2. Insert the PC Card into the CardBus Type II slot of

your notebook computer with its 68-pin connector

facing the slot. Make sure it is inserted all the way

in for a solid connection.

3. Power on your notebook computer.

Software Installation

This section provides information on how to install the

FireWire 800 CardBus DV-Kit software.

Windows 2000

Windows2000automatically installsit's built-inFireWire

400 driver for the FireWire 800 CardBus DV-Kit. To get the

full speed out of this controller, install the Firewire 800

driver using the directions below.

1. Insert the driver CD. Click Start, then click Run.

Type D:\setup.exe, click OK. (Change D: to match

your CD-ROM drive letter)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. Type in your customer information, then click Next.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At the Select Program Folder screen, click Next.

8. At the Digital Signature screen, click Yes, then click

Finish.

9. Select the restart Windows option, then click Finish.

Windows XP

Windows XP automatically installs it's built-in FireWire

400 driver for the FireWire 800 CardBus DV-Kit. To get the

full speed out of this controller,install the Firewire 800

driver using the directions below.

1. Insert the driver CD. Click Start, Run. Type

32-bit : Type D:\setup32.exe, click OK. (Change D:

to match your CD-ROM drive letter)

64-bit: Type D:\setup64.exe, click OK. (Change D:

to match your CD-ROM drive letter)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. At the Destination Location screen, click Next.

5. Select Complete, then click Next.

6. At the Select Program Folder screen, click Next.

7. At the Software Installation screen, click Continue

Anyway, then click Finish.

8. Select the restart Windows option, then click Finish.

Windows Server 2003

Windows Server 2003 automatically installs it's

built-in FireWire 400 driver for the FireWire 800 CardBus

DV-Kit. To get the full speed out of this controller,install

the FireWire 800 driver using the directions in the next

page.

1. Insert the driver CD. Click Start, Run.

32-bit : Type D:\setup32.exe, click OK. (Change D:

to match your CD-ROM drive letter)

64-bit: Type D:\setup64.exe, click OK. (Change D:

to match your CD-ROM drive letter)

2. At the Welcome screen, click Next.

3. At the License Agreement screen, click Yes.

4. At the Destination Location screen, click Next.

5. Select Complete, then click Next.

6. At the Select Program Folder screen, click Next.

7. At the Security Alert box, click Yes. This step is for

32-bit operating system only.

8. At the Software Installation screen, click Continue

Anyway, then click Finish.

9. Select the restart Windows option, then click Finish.

Windows Vista™

WindowsVistaautomaticallyinstalls it's built-inFireWire

400 driver for the FireWire 800 CardBus DV-Kit. To get the

full speed out of this controller,install the FireWire 800

driver using the directions below.

1. Insert the driver CD. Click Start, in the Start Search

box.

32-bit : Type D:\setup32.exe, press Enter. (Change

D: to match your CD-ROM drive letter)

64-bit: Type D:\setup64.exe, press Enter. (Change

D: to match your CD-ROM drive letter).

2. Click Allow.

3. At the Welcome screen, click Next.

4. At the License Agreement screen, click Yes.

5. At the Destination Location screen, click Next.

6. Select Complete, then click Next.

7. At the Select Program Folder screen, click Next.

8. At the Windows Security box, click Install three

times, then click Finish.

9. Select the restart Windows option, then click Finish.

Verify Windows Installation

1. Check Device Manger for proper installation.

For 2000/XP/Server 2003: Right click My Computer,

click Manage, then click Device Manager.

For Window Vista: Right click Computer, click

Manage, click Continue, click Device Manager.

2. Double click 1394 Bus host controllers. Unibrain

driver/OHCI Compatible Board should be

displayed.

Connecting Devices

General driver installation steps are provided below.

Please review your device's user manual for more details.

Windows 2000

1. At the Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver..., then click Next.

3. Uncheck all check boxes, then click Next.

4. Click Next, then click Finish.

Windows XP

1. At the Found New Hardware Wizard.

For XP w/SP2 or later: Select No, not this time, then

click Next.

For XP w/SP1 or earlier: Go directly to step #2.

2. SelectInstalltheSoftwareAutomatically,clickNext.

3. Click Continue Anyway. (Skip if not prompted).

4. Click Finish to complete the installation.

Server 2003

1. At the Found New Hardware Wizard.

For 2003 w/SP1 or later: Select No, not this time, then

click Next.

For 2003 no service pack installed: Go to step #2.

2. SelectInstalltheSoftwareAutomatically,clickNext.

3. At the Security Alert box click Yes, or the Hardware

Installation box click Continue Anyway, then click

Finish to complete the installation.

Windows Vista™

Windows Vista will automatically detect and install

most FireWire devices when connected. For devices that

do not install automatically, follow the steps below.

Refer to the device's users manual for more information.

1. Click Locate and install driver software.

2. Click Continue to complete the installation.

Ulead VideoStudio Installation

The FireWire 800 CardBus DV-Kit includes Ulead

VideoStudio digital video editing software for producing

home videos complete with attractive titles, transitions

and sounds.

1. Insert the Ulead VideoStudio DV software CD. The

installation should start automatically. If not, click

Start, Run, type in X:\Autorun.exe, then click OK.

(Replace X: with the drive letter of your CD-ROM)

2. Follow the on-screen instructions to complete.

Note: For instructions on how to use Ulead

VideoStudio, refer to the VStudio.pdf file located

in the Document\Manual directory on the Ulead

VideoStudio DV editing software CD.

ubSwitch Utility

In order to use a DV camcorder with this controller,

Microsoft's FireWire 400 driver must be installed in the

system. We have supplied an easy to use utility that

allows switching between Microsoft's driver and the

FireWire 800 driver. Before using this utility, unplug all

devices from the FireWire 800 cardbus.

1. Click Start, Programs, Unibrain ubcore, Tools then

ubSwitch.

2. Right click the ubSwitch icon located in the system

tray by the clock.

3. Click the 1394 adapter that you want to switch, then

click on Microsoft 1394 Drivers.

Note: If your system has multiple 1394 adapters

installed, make sure that you click on the 1394

adapter that the camcorder will be plugged into.

4. Windows will display an information box when the

driver is ready for use. It may take a few seconds for

this box to appear. Wait for this box to appear then

connect your DV camcorder.

Note: To switch back to the FireWire 800 driver,

follow the same procedures, but in step 3 instead of

clickingonMicrosoft1394Drivers, clickonUnibrain

1394 Drivers.

Connecting a DV Camcorder

Before setting up the digital video camcorder, verify the

Microsoft FireWire 400 driver has been successfully

installed in your system, then follow the procedures

below.

1. Connect the 4-pin connector of the provided

FireWire 400 (1394a) DV cable to your camcorder.

2. Connect the 6-pin connector to the FireWire 400

(1394a) port.

3. Power on the camcorder. The camcorder should

appear in Device Manager.

Verify DV Camcorder Setup

1. Right click My Computer, click Manage,then click

Device Manager.

2. Double click Imaging Device(s), and Microsoft DV

Camera and VCR or DV Camcorder should be

displayed.

Andere Handbücher für 1 FireWire 800 CardBus DV-Ki

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere SIIG FireWire Handbücher

SIIG

SIIG FireWire 2-Port CardBus Bedienungsanleitung

SIIG

SIIG DP FireWire 800 PCI-32T Bedienungsanleitung

SIIG

SIIG FireWire ExpressCard Bedienungsanleitung

SIIG

SIIG FireWire 800 DV Kit Bedienungsanleitung

SIIG

SIIG 1 FireWire 800 CardBus DV-Ki Bedienungsanleitung

SIIG

SIIG DP FireWire PCIe Bedienungsanleitung

SIIG

SIIG FireWire 800 ExpressCard Bedienungsanleitung

SIIG

SIIG FireWire 3-Port CardBus Bedienungsanleitung

SIIG

SIIG FireWire 800 2-Port ExpressCard/34 Bedienungsanleitung

SIIG

SIIG DP FireWire 800 PCI-32T Bedienungsanleitung

Beliebte FireWire Handbücher anderer Marken

Kramer

Kramer 648 Bedienungsanleitung

Hawking

Hawking DV692 Bedienungsanleitung

IOGear

IOGear BattleHub GFH600BH Bedienungsanleitung

Philips

Philips SWV3514S/10 Bedienungsanleitung

Belkin

Belkin F5U501GEU Bedienungsanleitung

Mackie

Mackie D.2 Bedienungsanleitung

Plextor

Plextor PX-755UF Bedienungsanleitung

Mackie

Mackie FireWire Bedienungsanleitung

Belkin

Belkin F5U501NEU Bedienungsanleitung

StarTech.com

StarTech.com PEX1394A2V Bedienungsanleitung

WEISS

WEISS INT202 Bedienungsanleitung

Exsys

Exsys EX-6701 Bedienungsanleitung

Apogee

Apogee X-FireWire Card Bedienungsanleitung

StarTech.com

StarTech.com PEX1394A2 Bedienungsanleitung

WiebeTech

WiebeTech SDD Bedienungsanleitung

Sonnet

Sonnet TANGO Bedienungsanleitung

Hawking

Hawking DV1394 Bedienungsanleitung

Dat Optic

Dat Optic eBOX-F Bedienungsanleitung