SIIG CN-WR0512-S1 Bedienungsanleitung
1
Wireless-N Router
Quick Installation Guide
Introducing the Wireless-N Router
The Wireless-N Router is designed to support sharing
internet access wirelessly with range up to four times
farther than standard Wireless-G.
Features and Benefits
• High Internet Access throughput
• Allow multiple users to share a single Internet line
• Share a single Cable or xDSL internet connection
• Access private LAN servers from the internet
• Four wired LAN ports (10/100M) and one WAN
port (10/100M)
System Requirements
• Internet connection, provided by xDSL or cable
modem wih RJ-45 Ethernet port
• Computer or network devices with wired or
wireless network interface card
• Web browser (Microsoft Internet Explorer 4.0 or
above, Netscape Navigator 4.7 or above, Opera or
Safari)
• Windows®2000 / XP (32-/64-bit) / Server 2003 &
2008 (32-/64-bit) / Vista (32-/64-bit)
04-0538B
2
Package Contents
•Wireless-N Router
• Switching power adapter
• User's manual CD & Quick Installation Guide
Layout
Figure 1: Front Panel
3
LAN
Figure 2: Back Panel
AntennaA AntennaB
Reset/WPS
Power WAN
4
Safety Information
In order to keep the safety of users and your properties,
please follow the following safety instructions.
1. This router is designed for indoor use only. DO
NOT place this router outdoors.
2. DO NOT put this router at or near hot or humid
places, like kitchen or bathroom. Also, do not leave
this router in the car during summer.
3. DO NOT pull any connected cable with force;
disconnect cables from the router first.
4. If you want to place this router at high places or
hang on the wall, please make sure the router is
firmly secured. Falling from high places would
damagetherouteranditsaccessories,andwarranty
will be voided.
5. Accessories of this router, like antenna and power
supply, are a danger to small children and could
cause serious injury to them. KEEP THIS ROUTER
OUT THE REACH OF CHILDREN!
6. The router will become hot when being used for
long time. This is normal and is not a malfunction.
DO NOT put this router on paper, cloth, or other
flammable materials.
5
7. Therearenouser-serviceablepartsinsidetherouter.
If you find that the router is not working properly,
please contact your place of purchase for help. DO
NOT disassemble the router, doing so will void the
warranty.
8. If the router falls into water when it’s powered, DO
NOTuseyourhand topick itup. Switchtheelectrical
power off before you do anything, or contact an
experienced technician for help.
9. If you smell something strange, or even see some
smoke coming out from the router or power supply,
remove the power supply or switch the electrical
power off immediately, and call dealer of purchase
for help.
System and Network Setup
Please follow the instructions below to build the network
connection between your new wireless router and your
computers, network devices.
1. Connect your xDSL/cable modem to the WAN
port of router by Ethernet cable, shown in Figure
3.
Figure 3
6
2. Connect all your computers, network devices
(network-enabled consumer devices other than
computers, like game console, or switch / hub) to
the LAN port of the router, shown in Figure 4.
Figure 4
3. Connect the A/C power adapter to the wall socket,
and then connect it to the Power socket of the
router, shown in Figure 5.
Figure 5
4. Please check all LEDs on the front panel. PWR LED
should be steadily on, WAN and LAN LEDs should
be on if the computer / network device connected
to the respective port of the router is powered on
and correctly connected.
7
If PWD LED is not on, or any LED you expected is
not on, please recheck the cabling.
Connecting to Wireless Broadband Router
by Web Browser
After the network connection is built, the next step you
should do is setup the router with proper network
parameters, so it can work properly in your network
environment.
Beforeyou can connecttothe router and startconfiguration
procedures, your computer must be able to get an IP
address automatically (use dynamic IP address). If it’s set
to use static IP address, or you’re unsure, please follow the
following instructions to configure your computer to use
dynamic IP address.
Windows 2000
1. Click Start, then click Control Panel.
2. Double click Network and Dial-up Connections,
Local Area Connection, Local Area Connection,
then click Properties.
3. Select Internet Protocol (TCP/IP), then click
Properties.
4. SelectObtain an IP address automatically ,Obtain
DNS server address automatically, then click OK.
8
Windows XP/Server 2003
1. Click Start, then click Control Panel.
2. Double click Network Connections, double click
Local Area Connection, then click Properties.
3. Select Internet Protocol (TCP/IP) and then click
Properties.
4. Select Obtain an IP address automatically , Obtain
DNS server address automatically, then click OK.
Windows Vista™
1. Click Start,then click Control Panel.
2. Click View Network Status and Tasks, and then
click Manage Network Connections.
3. Right-click Local Area Network, then select
Properties.Right click Local Area Network, then
clickProperties.
4. Select Internet Protocol Version 4 (TCP / IPv4),and
then click Properties.
5. Select Obtain an IP address automatically and
Obtain DNS server address automatically, then
click OK.
Windows Server 2008
1. Click Start,then click Control Panel.
2. Click Classic View, double click Network and
Sharing Center.
9
3. Click Manage network connections.
4. RightclickLocal Area Connection,click Properties.
5. Select Internet Protocol Version 4 (TCP / IPv4),
and then click Properties.
6. Select Obtain an IP address automatically and
Obtain DNS server address automatically, then
click OK.
7 Select Internet Protocol Version 6 (TCP / IPv6),
and then click Properties.
8. Select Obtain an IP address automatically and
Obtain DNS server address automatically, then
click OK.
10
Router IP Address Lookup
1. After the IP address setup is complete, please click
Start then Run, type in cmd, then click OK.
2. At the command prompt, type ipconfig,then press
Enter.Please check the IP address followed by
Default Gateway (In this example, the IP address
of router is 192.168.2.1, please note that this value
may be different), shown in Figure 6.
Figure 6
Note: If the IP address of Gateway is not
displayed, or the address followed by IP
Address begins with 169, please recheck
network connection between your computer
and router, and / or go to the beginning of this
chapter, to recheck every step of network
setup procedure.
Inhaltsverzeichnis
