Silex technology SX-ULPGN-BTZ Bedienungsanleitung

APPLICATION NOTE:

SX-ULPGN-BTZ

Development

Quick Start Guide

Silex Technology America

201 East Sandpointe, Suite 245

Santa Ana, CA 92707

Revision 1.5, February 2020

140-00217-100

Revision History

Rev. No.

Date

Revision by

Description

1.0

Mar 22, 2019

T.Nakase

Initial draft

1.1

Apr 1, 2019

T.Nakase

Section 3 and Appendix B, EVB_V01 update

1.2

Apr 23, 2019

T.Nakase

Section 6, Jumper setting update/correction

1.3

Aug 23, 2019

T.Nakase

Section 4.2 OpenOCD availability note, Section 5 BDF

update, Section 6.2 minor wording change

1.4

Aug 29, 2019

T.Nakase

Section 4.6 Winbond SPI flash note

1.5

Feb 10, 2020

T.Nakase

EVB_V02 update, 3.3V Power Supply jumpers. QCA4020

SDK update.

 

 
140-00217-100 
 
Table of Contents 
Scope......................................................................................................................................................4 
References .............................................................................................................................................4 
1 QDN Document..............................................................................................................................4 
2 Software Download Links ..............................................................................................................4 
Equipment..............................................................................................................................................5 
1 Hardware .......................................................................................................................................5 
2 Host PC Configuration....................................................................................................................5 
Software Install ......................................................................................................................................5 
1 Toolchain........................................................................................................................................5 
2 Debugger........................................................................................................................................5 
3 Python............................................................................................................................................6 
4 Oracle JDK ......................................................................................................................................6 
5 Eclipse IDE Package for C/C++ Developer......................................................................................6 
6 QCA4020 SDK.................................................................................................................................6 
Software Configuration..........................................................................................................................7 
1 WiFi Board Data File ......................................................................................................................7 
2 Bluetooth LE and IEEE 802.15.4 NVM Configuration File..............................................................7 
3 GNU MCU Eclipse Plug-in...............................................................................................................8 
4 Create External Tools Configuration for Firmware Flashing .......................................................10 
Hardware Setup ...................................................................................................................................11 
1 Jumper .........................................................................................................................................11 
2 Host PC FTDI Driver for JTAG .......................................................................................................13 
Build Sample Demo Project: QCLI_demo ............................................................................................13 
1 Import QCLI_demo Project to Eclipse IDE ...................................................................................13 
2 Disable Deep Sleep Mode............................................................................................................15 
3 Update Project Property..............................................................................................................15 

140-00217-100

7.4 Create Debug Configuration........................................................................................................17

7.5 Build Demo Project......................................................................................................................19

8. Flash Firmware.....................................................................................................................................20

9. Run Firmware.......................................................................................................................................20

10. Debug Firmware ..............................................................................................................................21

Appendix A: Emergency Loader (EDL) .........................................................................................................25

Appendix B: What’s different from Qualcomm CDB20/M20? ....................................................................26

Jumper Header.........................................................................................................................................26

Debug Header ..........................................................................................................................................27

Arduino Header........................................................................................................................................27

External PA...............................................................................................................................................27

Onboard Sensor .......................................................................................................................................27

140-00217-100

1. Scope

The purpose of this document is to provide instructions for setting up firmware development

environment of SX-ULPGN-BTZ EVK on Windows 10 with Intel Architecture 64bit CPU.

2. References

2.1 QDN Document

2.1.1 QCA402x (CDB2x) Development Kit User Guide, 80-YA121-140 Rev.D, Section 3

https://developer.qualcomm.com/hardware/qca4020-qca4024/tools-qca4020

2.2 Software Download Links

2.2.1 GNU Arm Embedded Toolchain 6-2016-q4-major

https://developer.arm.com/open-source/gnu-toolchain/gnu-rm/downloads

2.2.2 OpenOCD 20170609

http://gnutoolchains.com/arm-eabi/openocd/

2.2.3 Python 2.7.15

https://www.python.org/downloads/

2.2.4 Oracle JDK 8u202

https://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html

2.2.5 Eclipse IDE Oxygen 2 Package for C/C++ Developers

https://www.eclipse.org/downloads/packages/release/oxygen/2

2.2.6 QCA4020 SDK: QCA4020.OR.3.0 QCA OEM SDK+CDB

https://developer.qualcomm.com/hardware/qca4020-qca4024/tools-qca4020

2.2.7 Zadig 2.4

https://zadig.akeo.ie

140-00217-100

3. Equipment

3.1 Hardware

•The EVK board, SX-ULPGN-BTZ EVK (WCBN3516A_EVB V02)

•Host PC

•USB 2.0 Cable (Type A male –Type A male) x2

•Jumper Cap x14

•Jumper Cable (female –female) x3

3.2 Host PC Configuration

•Intel Core i7-4790 Processor @ 3.60 GHz

•8 GB RAM

•160GB HDD

•USB 2.0/3.0 x2

•Gigabyte Ethernet Port x1

•Windows 10 Professional

•Username: silex, Account type: Administrator

4. Software Install

4.1 Toolchain

1. Download gcc-arm-none-eabi-6_2-2016q4-20161216-win32.exe from the download link (Section

2.2.1 above.)

2. Run installer with default settings.

3. Add following path to PATH user variables

C:\Program Files (x86)\GNU Tools ARM Embedded\6.2 2016q4\bin

4.2 Debugger

1. Download OpenOCD-20170609.zip from the download link (Section 2.2.2 above.)

Note: OpenOCD version 20170609 is the latest release known to work well with EVK board. Please

contact Silex if it is not available from the internet.

2. Extract it to:

C:\Program Files (x86)\openocd

If your account doesn’t have PATH variable, please click New button and create it as new variable.

140-00217-100

3. And add following path to PATH user variables:

C:\Program Files (x86)\openocd\bin

4.3 Python

1. Download python-2.7.15.amd64.msi from the download link (Section 2.2.3 above.)

2. Run installer with default settings.

3. Add following path to PATH user variables:

C:\Program Files\Python27

4.4 Oracle JDK

1. Download jdk-8u202-windows-x64.exe from the download link (Section 2.2.4 above.)

2. Run installer with default settings.

4.5 Eclipse IDE Package for C/C++ Developer

1. Download eclipse-cpp-oxygen-2-win32-x86_64.zip from the download link (Section 2.2.5 above.)

2. Extract it to:

C:\Program Files\eclipse

4.6 QCA4020 SDK

1. Download QCA4020.OR.3.0 QCA OEM SDK+CDB from the download link (Section 2.2.6 above.)

2. Extract it to:

C:\Users\silex\qca4020-or-3.0_qca_oem_sdk-cdb.git

This document refers this directory as <SDK_source> hereafter.

Note: Current SDK OR-3.0 supports EVK V01 board only. EVK V02 and SX-ULPGN-BTZ mass

production module needs OR-3.1 or newer because it has Winbond SPI flash onboard. If you need

help, please contact Silex.

3. Open Command Prompt and go to SDK directory <SDK_source>\target

4. Run eclipseSupport.bat to install Eclipse project files of demo projects, .cproject, .project,

and .settings folder.

140-00217-100

5. Software Configuration

5.1 WiFi Board Data File

1. Copy updated Board Data File (BDF) wlan_fw_img.wcbm3516a_ctl_20190402.bin to:

<SDK_source>\target\bin\wlan

2. Backup original BDF wlan_fw_img.bin as wlan_fw_img.cdb.bin.

3. Overwrite original BDF with updated BDF.

5.2 Bluetooth LE and IEEE 802.15.4 NVM Configuration File

1. Copy updated NVM file QCA4020_2p0_WCBN3516A_20190322.nvm to:

<SDK_source>\target\quartz\nvm\config\2.0\4020\CDB

2. Backup original NVM file QCA4020_2p0.nvm as QCA4020_2p0_CDB.nvm.

3. Overwrite original NVM file with updated NVM file.

140-00217-100

5.3 GNU MCU Eclipse Plug-in

1. From Eclipse IDE top menu, click Help > Install New Software.

2. In Install dialog, set Work with to:

http://gnu-mcu-eclipse.netlify.com/v4-neon-updates

3. Click Add.

4. In Add Repository dialog, set Name to:

GNU MCU Eclipse plug-ins

5. Click OK.

6. In Install dialog, add check mark to GNU ARM & RISC V C/C++ Cross Development Tools.

140-00217-100

7. Click Next and finish install by following the instruction of dialog. If you see Security Warning

dialog during the installation, click Install Anyway.

8. Restart Eclipse.

9. From top menu, click Window > Preference.

10. At left pane of Preference dialog, select MCU > Global OpenOCD Path.

11. Set Folder to:

C:\Program Files (x86)\openocd\bin

Inhaltsverzeichnis

Beliebte Mikrocontroller Handbücher anderer Marken

AMS

AMS AS7261 Demo Kit Bedienungsanleitung

Novatek

Novatek NT6861 Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266 SDK Einrichtungshandbuch

Nuvoton

Nuvoton ISD61S00 ChipCorder Leitfaden

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Bedienungsanleitung

Texas Instruments

Texas Instruments Chipcon CC2420DK Bedienungsanleitung

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Bedienungsanleitung

NEC

NEC 78GK0S/K 1+ Series Montage- und Bedienungsanleitung

Mikroe

Mikroe SEMITECH N-PLC Click Montage- und Bedienungsanleitung

Intel

Intel Agilex Bedienungsanleitung

Cypress

Cypress CY4607 HX2VL Bedienungsanleitung

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Bedienungsanleitung

Texas Instruments

Texas Instruments TMS320F2837 D Series Bedienungsanleitung

CYPRES

CYPRES CY14NVSRAMKIT-001 Bedienungsanleitung

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Bedienungsanleitung

Espressif Systems

Espressif Systems ESP8266EX Betriebsanleitung

Abov

Abov AC33M8128L Bedienungsanleitung

Laird

Laird BL654PA Bedienungsanleitung