- 4 -
Using the thermal jug
Opening / Closing the lid
➪To open the thermal jug 0, turn the lid 9so
far to the side that the arrow on the lid 9points
to the symbol . You can now lift the lid 9
upwards.
Risk of personal injury!
Should you want to remove the lid 9directly after
the brewing process, ensure that you hold the lid 9
so that the hot condensed water, which can collect
on the lid 9, is not able to run onto your hand. Risk
of scalding!
➪To close the lid 9, place it so that the arrow on
the lid 9points to the symbol . Then turn it
so far back that the arrow on the lid 9points to
the symbol . The lid 9is now secured and
cannot fall off.
Pouring coffee
You do not have to remove the lid 9from the thermal
jug 0to pour coffee.
➪With the lid 9secured, press on the pouring
lever 8and hold it down. You can now
pour out the coffee.
➪When you have finished pouring, release the
pouring lever 8.
Preparing coffee
➪Swing out the filter holder 4and insert a filter
bag (Size 1x4) with the sides folded. Put coffee
powder into it (medium to fine ground). For one
cup of coffee you will require about one measuring
spoon qof coffee powder. Subject to taste, the
amount of coffee powder can vary.
➪Fill the water tank 1with the required amount
of water.
For this, use the scale 3on the water tank 1.
Note:
• Never fill it with water for more than 10 large
cups/ 15 small cups. Pay heed to the Max
marking in the water tank. The appliance can
overflow. Before use, check to ensure that the
thermal jug 0is empty.
• Before every brewing process, rinse the thermal
jug 0with hot mains water. This will ensure that
the coffee remains hot for longer.
➪Place the thermal jug 0in the coffee machine.
➪Press the switch 7to start the brewing process.
The red indicator lamp glows.
➪The coffee maker switches itself off automatically
when the brewing process has ended.
Note:
You cannot stop the brewing process manually.
All of the water that is in the water tank 1passes
through the coffee maker. Should you wish to stop
the brewing process you must disconnect the plug
6from the power socket.
➪You can extract the thermal jug 0and serve the
coffee when the red indicator light has extinguished.
Tip:
Should you wish to keep the coffee warm in the
thermal jug 0for an extended period, remove the
thermal jug 0from the coffee maker when the bre-
wing process is finished. When the thermal jug 0is
standing in the coffee maker the lid 9, due to the
brewing mechanism, is pressed down. As soon as
the brewing process is complete, hot air escapes
through the lid 9. The coffee cools faster. When
the thermal jug 0is removed from the coffee ma-
ker, the lid 9closes itself automatically. The coffee
stays hot for longer.
