Sime MURELLE PRO HE MkII Handbuch

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

UK Cod. 6316191 - 08/2013

6322984B - 06/2019 - R5

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

UK Cod. 6316191 - 08/2013

BRAVA DGT HE

25 - 30 - 35

199838

INSTALLATION AND SERVICING INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

Cod. 6316191 - 08/2013

please position here a sticker

from installation pack

BOILER DETAILS

USER, INSTALLATION AND SERVICING INSTRUCTIONS

MURELLE PRO HE MkII

Condensing wall mounted boiler

Cod.

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

199839

Authorised User No. 02285

SAFE HANDLING

IMPORTANT NOTICE

For the first year all of our appliances are protected by our manufacturer’s guarantee which covers both parts and

labour.

As you would expect from Sime Ltd, it is our aim to provide our valued customers with the best in after sales and

service.

To take advantage of any extended warranty offered, all you have to do is to adhere to these 3 simple conditions:

The installation must be carried out to Manufacturers/Benchmark Standards by a Gas Safe Registered

Engineer, and recorded in the installation manual.

The appliance must be registered with both Sime Ltd and Gas Safe within 30 days of installation.

The appliance must be serviced every 12 months, within 30 days of the anniversary of the installation date, by either

Sime Ltd or a Gas Safe registered engineer- ensuring that the Benchmark service record in the installation

manual is completed.

Failure to comply with the above will result in only the 12 month warranty being offered.In the absence of any proof

of purchase, the 12 month warranty period will commence from the date of manufacture of the boiler as shown on the

appliance data plate.

This boiler may require 2 or more operatives to move it into its installation site, remove it from its packaging and

during movement into its installation location. Manoeuvring the boiler may include the use of a sack truck and involve

lifting pushing and pulling.

Caution should be exercised during these operations.

Operatives should be knowledgeable in handling techniques when performing these tasks and the following precau-

tions should be considered:

– Grip the boiler at the base

– Be physically capable

– Use personal protective equipment as appropriate e.g. gloves, safety footwear.

During all manoeuvres and handling actions, every attempt should be made to ensure the following unless unavoi-

dable and/or the weight is light.

– Keep back straight

– Avoid twisting at the waist

– Always grip with the palm of the hand

– Keep load as close to the body as possible

– Always use assistance

WARNING

Caution should be exercised when performing any work on this appliance.

Protective gloves and safety glasses are recommended.

– Avoid direct contact with sharp edges.

– Avoid contact with any hot surfaces.

NOTICE

Please be aware that due to the wet testing of the appliance, there may some residual water in the hydraulic circuit.

– Protect any surfaces, carpets or floorings.

– Use a suitable container to catch any water that escape when removing the protective caps from the connections.

All descriptions and illustrations provided in this manual have been carefully prepared but we reserve the right to make

changes

and improvements in our products that may affect the accuracy of the information contained in this manual.

The Benchmark Scheme

Sime Ltd is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and

commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise

safety, efficiency and performance.

Benchmark is managed and promoted by the Heating and Hotwater Industry Council.

For more information visit www.centralheating.co.uk.

Please ensure that the installer has fully completed the Benchmark Checklist in the use and maintenance section of

the installation instructions supplied with the product and that you have signed it to say that you have received a full

and clear explanation of its operation.

The installer is legally required to complete a commissioning checklist as a means of complyng with the appropriate

Building Regulations (England and Wales).

All installations must be notified to Local Area Building Control either directly or through a Competent Persons

Scheme.

A Building Regulations Compliance Certificate will then be issued to the customer who should, on receipt, write the

Notification Number on the Benchmark Checklist.

This product should be serviced regularly to optimise its safety, efficiency and performance.

The service engineer should complete the relevant Service Record on the Benchmark Checklist after each service.

The Benchmark Checklist may be required in the event of any warranty work and as supporting documentation

relating to home improvements in the optional documents section of the Home Information Pack.

Please refer to commissioning instructions for filling in the checklist at the back of this installation guide.

Note: All Gas Safe registered installers carry a ID Card.

You can check your installer is Gas Safe Registered by calling 0800 408 5577

SIME COMBINATION BOILERS

Installer checklist

Important Information

IT IS A STATUTORY REQUIREMENT THAT ALL GAS APPLIANCES ARE INSTALLED BY COMPETENT PERSONS,

IN ACCORDANCE WITH THE GAS SAFETY (INSTALLATION AND USE) REGULATIONS (CURRENT EDITION). The

manufacturer’s instructions must not be taken as overriding any statutory requirements, and failure to comply

with these regulations may lead to prosecution.

No modifications to the appliance should be made unless they are fully approved by the manufacturer.

GAS LEAKS: DO NOT OPERATE ANY ELECTRICAL SWITCH, OR USE A NAKED FLAME. TURN OFF THE GAS SUPPL

AND VENTILATE THE AREA BY OPENING DOORS AND WINDOWS CONTACT THE GAS EMERGENCY SERVICE

0800111999.

Please remember to carry out the following checks after installation. This will achieve complete customer

satisfaction, and avoid unnecessary service calls. A charge will be made for a service visit where the fault is not

due to a manufacturing defect.

Has a correct by-pass been fitted and adjusted?

Has the system and boiler been flushed?

Is the system and boiler full of water, and the correct pressure showing on the pressure gauge?

Is the Auto Air Vent open?

Has the pump been rotated manually?

Is the gas supply working pressure correct?

Is the boiler wired correctly? (See installation manual).

Has the D.H.W. ﬂow rate been set to the customer requirements?

Has the customer been fully advised on the correct use of the boiler, system and controls?

Has the Benchmark Checklist in the use and maintenance section of this manual, been completed?

––

SAFETY WARNINGS AND REGULATIONS

m

WARNINGS

– After having unpacked the boiler en-

sure that it is undamaged and com-

plete including the valve pack, hanging

bracket and template.

– The appliance must be used as intend-

ed.

Sime Ltd

declines all responsible

for any injury or damage to persons,

animals,or property as a result of im-

proper installation, adjustment, main-

tenance or use.

–In the event of water leaks, disconnect

the appliance from the mains pow-

er supply, close the water mains and

seek help from a qualiﬁed engineer.

– Periodically check that the operating

pressure of the water heating system

when cold is

1-1.2 bar

. If required, in-

crease the pressure or seek help from

a qualiﬁed engineer.

– If the appliance is not used for a long

period of time, the following opera-

tions must be carried out:

set the main isolation switch to "OFF";

close the gas and water valves for the

water heating system.

– To ensure continued efﬁcient opera-

tion of the appliance it is recommend-

ed that it is serviced regularly, at least

once a year. This is also a condition of

the boiler warranty.

– It is the law that any service or repair

is carried out by a Gas Safe Registered

engineer.

– Services must be recorded in the

maintenance section of this installa-

tion guide.

m

WARNINGS

–

This manual

is an integral part of the

appliance. It must therefore be kept

for future reference and must always

accompany the appliance.

–

Installation and maintenance

of this ap-

pliance must be carried out by a Gas

Safe Registered Engineer in accord-

ance with the instructions contained

in the manual. On completing the in-

stallation the boiler should be com-

missioned and details recorded in the

Benchmark section of this manual.

This is a condition of the warranty

RESTRICTIONS

d

DO NOT

– To allow children under the age of 8 to

use the appliance. The appliance can

be used by children no younger than

8 years old, by people with physical or

cognitive disabilities, and by people

lacking experience or the necessary

knowledge, provided that they are su-

pervised or have been instructed on

how to use the appliance safely and

that they understand the risks associ-

ated with it.

– To allow children to play with the ap-

pliance.

–To allow unsupervised children to per-

form user maintenance and cleaning.

–Do not use electrical devices or ap-

pliances such as switches, electrical

appliances etc if you can smell gas. If

this should happen:

open the doors and windows to venti-

late the room;

turn the gas off at the meter;

call the emergency service 0800

111999.

– Do not touch the appliance with bare

feet or with any wet part of the body.

– Do not carry out any repair, mainte-

nance or cleaning operation before

having disconnected the appliance

from the mains power by setting the

main switch to "OFF", and closing the

gas supply.

– Do not modify the safety or adjustment

devices without authorization and in-

structions from the manufacturer.

d

DO NOT

– Do not block the condensate drain.

– Do not pull, detach or twist the electri-

cal cables coming out of the appliance

even if the appliance is disconnected

from the mains power supply.

– Do not expose the boiler to atmos-

pheric agents. These boilers can also

be installed in partially covered are-

as, as per EN 15502, with a maximum

ambient temperature of 60 °C and a

minimum ambient temperature of - 5

°C. It is generally advisable to install

the boilers below weathered roofs, on

the balcony or in a protected niche, to

protect them from exposure to weath-

ering agents (rain, hail and snow). All

boilers provide a standard antifreeze

function.

– Do not block or reduce the size of the

ventilation openings of the room where

the appliance is installed, if present.

– Remove the mains power and gas sup-

ply from the appliance if the external

temperature could fall below ZERO

(risk of freezing).

– Do not leave containers with ﬂamma-

ble substances in the room where the

appliance is installed.

– Do not place or store items on or close

to the appliance.

RANGE

MODEL CODE GAS COUNCIL

NUMBER

Murelle Pro HE 30 MkII 8114223 47-283-81

Murelle Pro HE 35 MkII 8114248 47-283-85

COMPLIANCE

Our company declares that

Murelle Pro HE MkII

boilers comply

with the following directives:

– Gas Appliances EU Regulation 2016/426

– Boiler Efﬁciency Directive 92/42/EEC

– Low Voltage Directive 2014/35/UUE

– Electromagnetic Compatibility Directive 2014/30/EU

– Ecodesign Directive 2009/125/EC

– Regulation (UE) N. 811/2013 - 813/2013

– Energy Labeling Directive 2010/30/EC

NOTE: for the model

Murelle Pro HE 35 MkII

WRAS and ENERGY

SAVING TRUST are under certiﬁcation.

1312

Please refer to the technical data plate for the serial number

and year of manufacture.

SYMBOLS

a

WARNING

To indicate actions which, if not carried out correctly,

can result in injury of a general nature or may dam-

age or cause the appliance to malfunction; these

actions therefore require particular caution and ad-

equate preparation.

f

ELECTRICAL HAZARD

To indicate actions which, if not carried out correct-

ly, could lead to injury of an electrical nature; these

actions therefore require particular caution and ade-

quate preparation.

d

DO NOT

To indicate actions which MUST NOT BE carried out.

m

CAUTION

To indicate particularly important and useful informa-

tion.

MANUAL STRUCTURE

This manual is organized as follows.

USER INSTRUCTIONS

TABLE OF CONTENTS 9

DESCRIPTION OF THE APPLIANCE

TABLE OF CONTENTS 15

INSTALLATION AND SERVICING

INSTRUCTIONS

TABLE OF CONTENTS 25

USER INSTRUCTIONS

TABLE OF CONTENTS

VERY IMPORTANT!

PLEASE MAKE SURE YOUR COMMISSIONING CHECKLIST AND THE SERVICE INTERVAL RECORDS ENCLOSED

ARE FILLED IN CORRECTLY.

ALL GAS SAFE REGISTERED INSTALLERS CARRY A GAS SAFE ID CARD.

BOTH SHOULD BE RECORDED IN YOUR COMMISSIONING CHECKLIST AND A SERVICE INTERVAL RECORDS.

YOU CAN CHECK YOUR INSTALLER IS GAS SAFE REGISTERED

BY CALLING ON 0800 408 5500 OR ALTERNATIVELY WWW.GASSAFEREGISTER.CO.UK

1 OPERATING THE MURELLE PRO HE MkII 10

1.1 Control panel ..................................10

1.2 Preliminary checks .............................11

1.3 Ignition .......................................11

1.4 Adjusting the delivery temperature ................11

1.5 Adjusting the domestic hot water temperature ......11

1.6 Fault / malfunction codes........................12

1.6.1 Maintenance request .................. 12

2 SHUTDOWN 12

2.1 Temporary shutdown ...........................12

2.2 Shutting down for long periods ...................13

3 MAINTENANCE 13

3.1 Servicing......................................13

3.2 External cleaning...............................13

3.2.1 Cleaning the case ..................... 13

4 DISPOSAL 13

4.1 Disposal of the equipment (European Directive

2012/19/EU) ...................................13

1 OPERATING THE MURELLE PRO HE MkII

1.1 Control panel

1 1

2 2

Fig. 1

KNOBS

tThe heating knob allows the user to set the heating

temperature to between 20 and 80°C during normal op-

eration (Default PAR tS1.3 / 1.4).

rThe domestic hot water knob allows the user to set the

domestic hot water temperature to between 10 and

60°C during normal operation.

FUNCTIONAL BUTTONS

sPress for more than one second and release to step

through the operating modes (Stand-by – Summer –

Winter).

<This allows the engineer to scroll through the parame-

ters or decrease the values.

>This allows the engineer to scroll through the parame-

ters or increase the values.

oThis allows the engineer to conﬁrm the selected param-

eter or to modify the value or to reset the appliances

from a lockout failure.

cProgramming connector cover plug.

NOTE:

pressing any one of these buttons for more than 30 sec-

onds generates a fault on the display without preventing boiler

operation. The warning disappears when the button is released.

DISPLAY

“SUMMER”

. This symbol appears when the boiler is

operating in Summer mode or if only the domestic hot

water mode is enabled via the remote control. If the

symbols land nare ﬂashing, this indicates that the

chimney sweep function is active.

“WINTER”

. This symbol appears when the boiler is oper-

ating in Winter mode or if both the domestic hot water

and heating modes are enabled via the remote control.

With dedicated remote controls CR or Home, if no oper-

ating modes have been enabled both symbols land

nwill be off.

“RESET REQUIRED”

. This message only appears if there

is a malfunction which must be or may be restored

manually.

“DOMESTIC HOT WATER”

. This symbol is present during

a request for DHW or when the chimney sweep function

is operating; it ﬂashes during the domestic hot water

set point selection.

“HEATING”

. This symbol is present during heating oper-

ation or when the chimney sweep function is operating;

it ﬂashes during the heating set point selection.

“LOCKOUT” DUE TO NO FLAME

“FLAME LIT"

“ALARM"

. This indicates that a fault has occurred. The

number speciﬁes the cause which generated the alarm

(see section "Malfunction codes and possible solu-

tions".

"MAINTENANCE REQUEST"

. If active, it shows it is time to

perform maintenance on the boiler.

Inhaltsverzeichnis

Andere Sime Kessel Handbücher

Sime

Sime LOGO OF TS Series Bedienungsanleitung

Sime

Sime ALU PLUS HE 360 Handbuch

Sime

Sime Estelle B4 INOX ErP Bedienungsanleitung

Sime

Sime Brava One 25 BF Handbuch

Sime

Sime Format.zip Bedienungsanleitung

Sime

Sime Format 30 HE Benutzerhandbuch

Sime

Sime SOLO 25 Bedienungsanleitung

Sime

Sime Planet Dewy 60 BFR Bedienungsanleitung

Sime

Sime MURELLE EV 25/55 OF Bedienungsanleitung

Sime

Sime BRAVA SLIM 40 BF Handbuch

Sime

Sime MURELLE HE 3 5 R ErP Bedienungsanleitung

Sime

Sime MURELLE HE 50 R E Kurzanleitung

Sime

Sime BRAVA SLIM HE 25 ErP Handbuch

Sime

Sime DUETTO 25 EV Handbuch

Sime

Sime VERA 25 OF ErP Handbuch

Sime

Sime MURELLE REVOLUTION 30 Handbuch

Sime

Sime Estelle B4 INOX BF TS Bedienungsanleitung

Sime

Sime BRAVA ONE HE ErP Handbuch

Sime

Sime MURELLE EQUIPE 220 BOX Bedienungsanleitung

Sime

Sime FORMAT DGT Series Bedienungsanleitung

Sime

Sime Dewy 30 HE FS Benutzerhandbuch

Sime

Sime ECOMFORT PLUS 25 HE Bedienungsanleitung

Sime

Sime Brava Slim Bedienungsanleitung

Sime

Sime RS Mk.II Series Bedienungsanleitung

Beliebte Kessel Handbücher anderer Marken

Vaillant

Vaillant uniSTOR VIH SW GB 500 BES Bedienungsanleitung

Radijator

Radijator BIO max 23.1 Bedienungsanleitung

Brunner

Brunner BSV 20 Bedienungsanleitung

Buderus

Buderus Logamax GB062-24 KDE H V2 Bedienungsanleitung

Potterton

Potterton 50e Datenblatt

UTICA BOILERS

UTICA BOILERS TriFire Bedienungsanleitung

Joannes

Joannes LADY Series Handbuch

ECR International

ECR International UB90-125 Gebrauchsanweisung

Froling

Froling FHG Turbo 3000 Bedienungsanleitung

Froling

Froling P4 Pellet 8 - 105 Bedienungsanleitung

U.S. Boiler Company

U.S. Boiler Company K2 Bedienungsanleitung

Henrad

Henrad C95 FF Bedienungsanleitung

NeOvo

NeOvo EcoNox EF 36 Bedienungsanleitung

Potterton

Potterton PROMAX SL 12 Bedienungsanleitung

Eco Hometec

Eco Hometec EC 25 COMPACT Bedienungsanleitung

Viessmann

Viessmann VITODENS 200 Leitfaden

Baxi

Baxi Prime 1.24 Bedienungsanleitung

REXNOVA

REXNOVA ISA 20 BITHERMAL Bedienungsanleitung