Simons Voss Technologies GatewayNode 2 Bedienungsanleitung
GatewayNode 2
Manual
17.06.2021
Contents
1 General .......................................................................................................................................................... 3
2 General safety instructions.....................................................................................................................4
3 Product-specific safety instructions.................................................................................................... 7
4 Meaning of the text formatting .............................................................................................................8
5 Scope of delivery........................................................................................................................................9
5.1 Accessories .........................................................................................................................................................9
6 Connections............................................................................................................................................... 10
7 Installation ...................................................................................................................................................11
7.1 Antenna ...............................................................................................................................................................12
8 Initial operation..........................................................................................................................................15
8.1 IPsettings............................................................................................................................................................ 15
9 Maintenance.............................................................................................................................................. 16
10 Signalling .....................................................................................................................................................17
11 Fault rectification..................................................................................................................................... 18
11.1 Reset .................................................................................................................................................................... 18
12 Technical specifications ....................................................................................................................... 20
12.1 Optional external antenna ........................................................................................................................22
12.1.1 Electrical specifications ............................................................................................................ 22
12.1.2 Connection specifications........................................................................................................22
12.1.3 Mechanical specifications and dimensions ....................................................................23
13 EU/UK Declaration of conformity.......................................................................................................24
14 Help and other information ..................................................................................................................25
GatewayNode 2 (Manual) Contents
2 / 27
1 General
GatewayNode 2 (Manual) 1. General
3 / 27
2 General safety instructions
Signal word (ANSI
Z535.6) Possible immediate effects of non-compliance
DANGER Death or serious injury (likely)
WARNING Death or serious injury (possible, but unlikely)
CAUTION Minor injury
IMPORTANT Property damage or malfunction
NOTE Low or none
WARNING
Blocked access
Access through a door may stay blocked due to incorrectly fitted and/or in-
correctly programmed components. SimonsVoss Technologies GmbH is
not liable for the consequences of blocked access such as access to in-
jured or endangered persons, material damage or other damage!
Blocked access through manipulation of the product
If you change the product on your own, malfunctions can occur and access through a door can
be blocked.
Modify the product only when needed and only in the manner described in the
documentation.
IMPORTANT
Damage resulting from electrostatic discharge (ESD)
This product contains electronic components that may be damaged by electrostatic discharges.
1. Use ESD-compliant working materials (e.g. Grounding strap).
2. Ground yourself before carrying out any work that could bring you into contact with the
electronics. For this purpose, touch earthed metallic surfaces (e.g. door frames, water pipes
or heating valves).
Damage resulting from liquids
This product contains electronic components that may be damaged by liquids of any kind.
Keep liquids away from the electronics.
Damage resulting from aggressive cleaning agents
The surface of this product may be damaged as a result of the use of unsuitable cleaning agents.
Only use cleaning agents that are suitable for plastic or metal surfaces.
GatewayNode 2 (Manual) 2. General safety instructions
4 / 27
Damage as a result of mechanical impact
This product contains electronic components that may be damaged by mechanical impacts of
any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electronics.
Damage as a result of overcurrent or overvoltage
This product contains electronic components that may be damaged by excessive current or
voltage.
Do not exceed the maximum permissible voltages and/or currents.
Damage due to polarity reversal
This product contains electronic components that may be damaged by reverse polarity of the
power source.
Do not reverse the polarity of the voltage source (batteries or mains adapters).
Operational malfunction due to radio interference
This product may be affected by electromagnetic or magnetic interference.
Do not mount or place the product directly next to devices that could cause electromagnetic
or magnetic interference (switching power supplies!).
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the
product.
Do not mount or place the product on or near metallic surfaces.
NOTE
Intended use
SmartIntego-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SmartIntego products for any other purposes.
Qualifications required
The installation and commissioning requires specialized knowledge.
Only trained personnel may install and commission the product.
Incorrect installation
SimonsVoss Technologies GmbH accepts no liability for damage caused to doors or compon-
ents due to incorrect fitting or installation.
Modifications or further technical developments cannot be excluded and may be implemented
without notice.
GatewayNode 2 (Manual) 2. General safety instructions
5 / 27
The German language version is the original instruction manual. Other languages (drafting in the
contract language) are translations of the original instructions.
Read and follow all installation, installation, and commissioning instructions. Pass these instruc-
tions and any maintenance instructions to the user.
GatewayNode 2 (Manual) 2. General safety instructions
6 / 27
3 Product-specific safety instructions
CAUTION
Risk of burns due to hot circuit board
If you power the device with Power-over-Ethernet (PoE), the board can be-
come very hot.
Allow the unit to cool down before opening the housing.
Risk of electric shock from connected power supply
The device is supplied with power during operation. Opening the housing and touching live parts
may result in electric shock.
1. If the power supply is connected, do not open the housing.
2. Disconnect the power supply (or disconnect the network cable) before opening the housing.
NOTE
Unauthorised access with standard access data
The standard access data can be viewed freely. Unauthorised persons can-
not change the access authorisations, but they can change the network
configuration. You will then no longer be able to reach the device via the
network and will have to reset it.
Some browsers do not transmit spaces at the beginning of the password.
1. Change the default password.
2. Do not start or end the password with spaces.
Further documentation
You can find further documentation about SmartIntego products on the SmartIntego page
(www.smartintego.com).
GatewayNode 2 (Manual) 3. Product-specific safety instructions
7 / 27
4 Meaning of the text formatting
This documentation uses text formatting and design elements to facilitate
understanding. The table explains the meaning of possible text formatting:
Example button
Example
Example checkbox
Example Option
[Example] Tab
"Example" Name of a displayed window
|Example| Upper programme bar
Example Entry in the expanded upper pro-
gramme bar
Example Context menu entry
▼ Example Name of a drop-down menu
"Example" Selection option in a drop-down
menu
"Example" Area
Example Field
Example
Name of a (Windows) service
Example
Commands (e.g. Windows CMD
commands)
Example Database entry
[Example] MobileKey type selection
GatewayNode 2 (Manual) 4. Meaning of the text formatting
8 / 27
5 Scope of delivery
GatewayNode 2: Cover, base plate with circuit board and three pre-
assembled strain reliefs
Removable sticker with Chip-ID
Quick guide
5.1 Accessories
You can use optionally available accessories to adapt your device to
different applications.
Order code Name Purpose
ANTENNA.EXT.868 External antennas
You can connect the
external antenna to the
MCX connector of the
circuit board and im-
prove reception (see
Antenna [}12]
).
POWER.SUPPLY.2 Power supply (12 VDC,
500 mA)
You can use this power
supply unit to power
your device.
GatewayNode 2 (Manual) 5. Scope of delivery
9 / 27
6 Connections
DC In RJ45 ANT
IO
IO-Vout GND
+ 3.3 V
Analog Input
Unused
DI 3
DI 2
DI 1
O 3
O 2
O 1.NC
O 1.NO
O 1.COM
NOTE
IO connector only for RouterNode 2
You can only use the connectors of the IO connector at RouterNode 2.
Connection Meaning
DC In Pin connector Power supply with round
plug connector
IO-Vout
Terminal block: GND Auxiliary voltage output -
Earth connection
Terminal block: +3.3 V Auxiliary voltage output -
Positive pole
RJ45 Network connection
ANT
Connector for external an-
tenna (see
Antenna
[}12]
)
GatewayNode 2 (Manual) 6. Connections
10 / 27
Inhaltsverzeichnis
Beliebte Tor Handbücher anderer Marken
LST
LST M500RFE-AS Bedienungsanleitung
Kinnex
Kinnex Media Gateway Bedienungsanleitung
2N Telekomunikace
2N Telekomunikace 2N StarGate Bedienungsanleitung
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung
Telsey
Telsey CPVA 500 - SIP Bedienungsanleitung
