Simply Brands GD96 Bedienungsanleitung
2.4G G-Sensor Control
Foldable Spider Drone
USER MANUAL
Model: GD96 SKU: SBA-00139 (without Camera)
SBA-00140 (4K HD Stills Camera/
1080p FHD Video Camera)
CAUTION: This product is not a toy. This
is not intended for use by children under the
age of 14. For your safety, please read this user
manual carefully and thoroughly before using
this product.
Please keep this manual somewhere safe for
future reference.
2
What’s Included
1x Foldable Spider
Drone (rechargeable
battery included)
1x Remote Control
(3x AAA batteries
not included)
2x Backup Propellers 1x USB Charger
1x Screwdriver 1x User Manual
Please Note
Please carefully check the number of accessories
shown above are not missing. Please provide proof of
purchase and contact the retailer for any replacement
parts if they are missing.
3
Pre-Flight Preparation
1. Opening the Wings
Wings now extended
2. Attaching the Protective Guard
Align the protective guard with the bottom of the
motor and rmly press it into place.
3. Attaching the Propellers
Align the propellers to the motor shaft and press them
in until rmly attached (match Propeller Awith Shaft A
and Propeller Bwith Shaft B).
4
4. Battery Charging for the Drone
Pre-Flight Preparation
A. Remove the rechargeable lithium battery pack from
the bottom at the drone.
B. Connect the USB charger with the charging port of
the lithium battery pack.
Please Note
Battery pack’s red LED indicator light will be off whilst
charging and it will only switch on when fully charged.
Charging time is about 150 minutes. The drone’s
operation time is about 7 minutes.
5
Battery Pack Guidelines
•There is a certain risk when using the drone’s lithium
battery. It may potentially cause a re, body injury or
property damage. Users must be aware of these risks
and take full responsibility in ensuring the battery
isn’t improperly used.
• If battery leakage occurs, please avoid electrolyte
discharge making contact with your eyes or skin.
If it happens, please wash your eyes thoroughly with
clean water and immediately seek medical care.
•Please immediately remove the battery from the
drone if you sense any peculiar smell, noise or smoke
coming from it.
Battery Pack Charging
•Please use the originally supplied USB charger to
ensure your safety and minimise any potential risks.
•Do not charge a dilatant or outworn battery.
•Do not overcharge the battery. Please unplug the
USB charger once the battery is fully charged.
• Do not charge the battery next to inammables such
as carpet, wooden oor, wooden furniture or on the
surface of electro-conductive objects. Please always
keep an eye on the battery when charging.
•Do not charge the battery when it’s not yet properly
cooled down.
•The battery’s charging temperature should be
between O°C to 40°C.
Battery Recycling
•Do not dispose the battery as household rubbish.
Please take it to a battery recycling point at a
recycling centre local to you. Alternatively you can
take it to a specic recycling collection point in a
supermarket, a DIY centre or local shop.
6
Remote Control Overview
High / Low Speed
One-key Flips &
Rolls 360°
Left Joystick (press
and hold down for
‘Headless Mode’)
Right Joystick (press
and hold down for
‘Fine-tuning Mode’)
One-key Start /
Landing (long press for
emergency stop)
Power Switch
Indicator Light
Inserting AAA Lithium Batteries
Open the battery cover and correctly insert the 3x
AAA batteries according to the +/- electrode markings.
(please note that batteries for the remote control are
not included).
Please Note
1. Make sure the batteries are loaded correctly according
to the polarity markings in the battery compartment.
2. Please do not mix old and new batteries together.
3. Please do not mix different types of batteries together.
7
Transmitter and Receiver
signal connection
Turn on the drone and place it on a level surface,
the drone’s indicator light should start to slowly
blink, which indicates it’s waiting for pairing.
Switch on the remote controller. When the remote
controller’s indicator light blinks, move the left
joystick upwards and you’ll hear a beep sound. Then
move it downwards and you’ll hear another beep
sound. When both the remote controller’s and
drone’s indicator light appear solid, this will indicate
pairing has been successful.
Press the ‘One Key Start/
Landing’ button as
shown on the right and
the drone’s propellers
will start to rotate.
Begin ying using
‘One Key Start’
8
Basic Flight Controls
Use the left joystick to control the ight altitude (ascent
or descent) and to rotate around to the left or right.
The right joystick lets you control to go forwards or
backwards as well as being able to bank to the left-
hand side / right-hand side.
Left Joystick
Descent
Ascent
Rotate
Left
Rotate
Right
Backwards
Forwards
Bank
Left
Bank
Right
Right Joystick
9
Basic Flight Controls
Flips & Rolls
When the drone is ying above 3 metres high, you can
press the ‘360° ips and rolls’ button and move the
right joystick to any specic direction you want which
will make the drone rotate in that chosen direction.
360° ips and rolls
Bank right
Bank left
Forwards
Backwards
Hover
When you let go of the left joystick (throttle) after the
drone has ascended / descended, the drone will stay
still hovering in mid-air until you next move one of the
joysticks again.
Left Joystick
– once you let
go of this, the
drone will stay
still hovering
in mid-air
10
Headless Mode
Using ‘Headless Mode’ helps to make it easier and
safer to learn how to y a drone especially if you are
a beginner. The drone will automatically y in the
direction you want it to regardless of the direction it’s
facing. This is particularly useful if you’re unsure what
the drone’s orientation is if you can’t tell from a long
distance away from you.
1. The drone is by default in ‘common / normal’ mode
as the drone’s indication light will be visibly on.
When you press the ‘headless mode’ function key on
the remote control, you’ll hear a short beep sound
that will indicate the drone has entered into headless
mode. When you next press the headless mode
function key again, you’ll then hear a long beep
sound that indicates the drone has now come out of
headless mode and is back to it’s default setting.
2. ln headless mode, you as the operator don’t need to
worry about identifying the direction of the drone’s
nose is facing, which just leaves you to easily control
the direction of the drone you want it to y to. If you
move the drone to the left or right, it will move to
your left or right.
Left Joystick
– press this
down to enter
/ exit ‘headless
mode’
One-key Landing Mode
Press the ‘One-key Start
/ Landing’ button on the
remote control to make
the drone automatically
slowly descend until
landing on the ground
and switch itself off.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
