Simpnic SiMP Remote Bedienungsanleitung
Quick Installation Guide
SiMP Remote
IRB-01-SW
1. Package Content
2. Get Started
2.1 Preparation
2.2 Installation and Power On
2.3 Pairing
2.4 Reset
3. Basic Settings
3.1 Television (TV) Control
3.2 Air Conditioner (AC) Contro
3.3 Learn Mode
4. FAQ
5. Support
1. Package Content
SiMP Remote
USB Cable
Adapter (5V, 1A)
Quick Installation Guide
Warranty Card
SiMP Remote can only work with SiMP Keeper.
Please make sure you already have SiMP Keeper.
Otherwise SiMP Remote can’t work.
2. Get Started
2.1 Preparation
Get your SiMPNiC SiMP Keeper ready and
download SiMPNiC App in advance.
To make SiMP Remote work, you need to
set up SiMPNiC SiMP Keeper first.Please
refer to SiMPNiC Smart Home Kit Quick
Installation Guide or tutorial in SiMPNiC App.
You can scan QR code below to download
SiMPNiC App from APP Store (iOS) or
Google Play (Android).
2.2 Installation and Power On
SiMP Remote is to control your TV or AC by
IR (Infrared Ray). For maximum functionality,
install it at the optimum spot where its ray can
reach each appliance you want to control.
After you confirm the spot,power on it with
USB cable and adapter. There will be a blue
glimmer spot. If there is no glimmer, refer to
"Reset"section to make it to default settings.
2.3 Paring
Pairing SiMP Remote with your SiMP Keeper in
SiMPNiC App.
If your SiMP Remote is from Home Kit, it’s
already in your SiMPNiC App.
Power on SiMP Remote with USB
cable and adapter. There will be a blue
glimmer spot. If there is no glimmer,
refer to "Reset" section to make it to
default settings.
① Make sure your smartphone is
connected to Home Wi-Fi (2.4GHz).
② Open SiMPNiC App.
③ Select "Room" icon.
④ Select "+" to add device.
⑤ Select "SiMP Remote".
⑥ SiMP Keeper will beep 2 times and
begin searching. The process lasts
about 45 sec(remember to check
LED indicator is blinking during this
period). And then SiMP Remote
will appear in the list.
⑦ If SiMP Remote is not found, select
"Cancel" and search again.
2.4 Reset
If there is no glimmer spot on Smart
Remote, please press the button on
the back for 5 seconds to reset. The
glimmer spot on SiMP Remote will start
blinking (for about 4 minutes). During
this period of time, you can pair it.
Attention:
Once you reset, SiMP Remote will
return to factory default settings. Only
if you want remove it from current SiMP
Keeper, otherwise it’s not suggested to
reset.
3. Basic Settings
3.1 TV Control
3.1.1 Tap "SiMP Remote"and select "Television".
3.1.2 Select "Region"and "Brand"of your television.
3.1.3 Follow "Smart Search"to complete the
setting. It will request you to try several
buttons to make sure SiMP Remote is
compatible with your TV.
3.2 AC Control
3.2.1 Tap "SiMP Remote"and select "Air Conditioner".
3.2.2 Select "Brand"of your air conditioner.
3.2.3 Follow "Smart Search"to complete the
setting. It will request you to try several buttons
to make sure SiMP Remote is compatible
with your AC.
3.3 Learn Mode
If you want to control other home
appliances in addition to TV/AC, you can
use "Learn Mode"to embody buttons of
various remote in SiMPNiC App.
3.3.1 Tap "SiMP Remote"and select
"General Controller".
3.3.2 Select a blank button on screen to learn
a preferred button on your remote
control. For example, tap the center
button on screen, and then you will see
many function buttons in next page.
Select , for instance.
3.3.3 Target your remote control IR emitter at
the receiver (LED indicator glimmer in
blue) of SiMP Remote.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Simpnic Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
