
Health & Safety
®products are designed with safety in mind. However, personnel using
e familiar with any potential dangers. All safety information
detailed in this handbook
should be reviewed before installing and operating
this water purification system.
This product is not a toy; please keep children away from the
water purifier or use under adult supervision. Please keep packing
materials out of children's reach.
The system has been designed for indoor use only. Install the System
out of direct sunlight on a flat, level, dry, and secure surface at
ambient room temperature.
Do not move the system without first isolating the power supply
and draining the feed water tank.
This unit is for use with cold municipal tap water or potable well
water that has been tested safe by a certified laboratory. Never use
hot water or unknown/unsafe sources of water.
To protect against fire, electric shock, and injury, do not immerse
power cords, plugs, or the appliance in water or any other liquid.
In case of malfunction, remove the power plug. If any part of the
System is damaged or missing, replace the items before use.
Warnings and Cautions are provided; Failing to observe the
instructions could damage the equipment, associated parts,
surroundings, or cause personal injury.
Operating Guidelines
The following table lists the operating parameters for this product. Operating
this product outside these specifications may cause system performance issues
and may even lead to personal injury and void any warranty. Please contact
SimPure®for further advice and support.
Model
Production rate (up to)
Dependent on feed water type and temp.
4.4 fl. oz (130ml/min)
(2 Gallons/hrs. (7.8 L/hr.))
Filter life expectance
Dependent on feed water type and temp.
Feed Water Type
Municipal potable/tap water or Well water
meeting government drinking water
standards
Feed Water Temperature
Rated Voltage
Rated Power
Dimensions
17.9 x 14.96 x 7.87 Inches
(455 x 380 x 200 mm)
Weight
Storage Reservoirs
1.3 Gal. (5.0L) Feed water Reservoir
0.4 Gal. (1.5L) Pure water Reservoir
Feed Water TDS* level
* TDS = Total Dissolved Solids, the total weight of all solids dissolved in a given volume of water, expressed in units of mg per unit
volume of water (mg/L), also referred to as parts-per-million (ppm). With a SimPure®TDS meter, you can easily compare th
outlet quality with your source water to help monitor the system's performance.