Simrad IS20 Combi Bedienungsanleitung
I
S
2
0
MANUAL
IS20 Graphic
Multifunction instrument
20222576 / A Sw.1.1
English
Copyright
All rights reserved. No part of this document may be
reproduced or otherwise copied without prior written
permission of Navico Holding AS.
© 2007 by Navico Egersund AS
About this manual
This manual is a reference guide for installing and
operating the Simrad IS20 Graphic instrument.
The manual does not include operator or installation
procedures for sensors that can be connected to the
system.
In this manual, names of menu commands, dialog box
text and keys are written in boldface (e.g. Main menu,
Setup command, Left key).
Important text that requires special attention from the
reader is emphasized as follows:
Used to draw the reader’s attention to a comment or
some important information.
Used when it is necessary to warn personnel that a
risk of damage to the equipment or hazard exists if
care is not exercised.
2 | IS20 Graphic instrument
Content
1 Introduction ............................................... 7
1.1 General information..................................7
1.2 Instrument layout ....................................7
1.3 IS20 system examples..............................8
2 Basic operation ......................................... 11
2.1 Turning the IS20 on ............................... 11
2.2 Backlighting .......................................... 12
2.3 Scrolling through data pages ................... 13
2.4 Resetting a data page............................. 14
2.5 Operating the menu system..................... 14
2.6 Disabling/enabling data pages ................. 17
2.7 Locking and unlocking the keys ................ 19
2.8 Power save function ............................... 19
3 Advanced operation .................................. 21
3.1 Customizing the data pages..................... 21
3.2 Remote operation .................................. 23
3.3 SimNet group function ............................ 23
3.4 Demo mode .......................................... 26
4 The log/timer functions............................ 27
4.1 The timer function.................................. 27
4.2 Trip logging........................................... 30
4.3 Speed logging........................................ 30
4.4 Setting the time offset ............................ 31
IS20 Graphic instrument | 3
5 Changing the default settings ................... 33
5.1 General ................................................ 33
5.2 Setting the damping factors..................... 33
5.3 Alarm setup .......................................... 34
5.4 Updating the data sources ....................... 37
5.5 Changing the display settings .................. 39
5.6 Language selection................................. 41
5.7 Changing the units of measure................. 42
6 IS20 Alarm system ................................... 43
6.1 Alarm indication..................................... 43
6.2 Acknowledging an alarm ......................... 44
6.3 Viewing active alarms ............................. 44
6.4 Alarm codes .......................................... 44
7 Installation ............................................... 47
7.1 Location of the unit ................................ 47
7.2 Mechanical installation ............................ 47
7.3 Cable connection.................................... 49
8 Configuration............................................ 57
8.1 First time start-up .................................. 57
8.2 Calibration ............................................ 58
8.3 SimNet groups....................................... 67
9 Maintenance ............................................. 69
9.1 General maintenance.............................. 69
9.2 Service information ................................ 69
9.3 Resetting the instrument system .............. 71
4 | IS20 Graphic instrument
9.4 Displaying instrument information ............ 71
10 Spare parts ............................................. 73
10.1 Spares and auxiliaries ........................... 73
10.2 SimNet cables and accessories ............... 74
11 Specifications ......................................... 75
11.1 Technical specifications ......................... 75
11.2 Dimensional drawing............................. 76
11.3 Menu flow chart ................................... 77
11.4 Data groups and data items ................... 78
IS20 Graphic instrument | 5
Blank page
6 | IS20 Graphic instrument
1Introduction
1.1 General information
The IS20 Graphic is a multifunction instrument that
displays speed, depth, heading, position, wind and
environmental data measured by sensors and other
equipment connected to the system.
Navigational data, engine/battery status and vessel
parameters as e.g. accumulated log and rudder angle
may also be displayed.
The instrument calculates speed trim, wind head/lift, trip
distance and time, average speed, set and drift
parameters. A race timer is also included in the IS20.
1.2 Instrument layout
The IS20 has a 130 * 104 pixels LCD. The display may be
set to red or white illumination color, and the contrast
and light level are adjustable.
The instrument is equipped with 2 SimNet connectors,
and with one NMEA0183 input connector.
Keys
The instrument is operated by 6 keys. These are used to
adjust the light, scroll between data pages, to operate
the menu and to set parameter values.
Introduction | 7
Softkeys
When the basic operation of the
keys is
changed, soft key symbols
will be displayed right above the
keys to indicate the alternate
function.
The softkey symbols are illustrative, and they are
described under the functions as these appear in this
manual. The following general softkey symbols are used:
OK
Cancel
1.3 IS20 system examples
The IS20 may be installed as a stand-alone instrument
system, or as part of an advanced instrument or steering
system on the boat.
The figures below show simplified illustrations for basic
and an expanded IS20 system.
8 | Introduction
IS20 Graphic, Basic system
IS20 Graphic, Basic system with 2 sensors
Introduction | 9
Wind
transducer
T-joiner
Active depth
transducer
Analog
speed/temp
sensor
12V SimNet supply
Red disk
IS20 Expanded system
10 | Introduction
Andere Handbücher für IS20 Combi
3
Inhaltsverzeichnis
Andere Simrad Schiffsausrüstung Handbücher
Simrad
Simrad ME70 - REV C Bedienungsanleitung
Simrad
Simrad ES60 - DATASHEET REV A Bedienungsanleitung
Simrad
Simrad NL - SPEED LOG REV C Bedienungsanleitung
Simrad
Simrad CS90 Bedienungsanleitung
Simrad
Simrad SN90 Bedienungsanleitung
Simrad
Simrad IS20 Combi Bedienungsanleitung
Simrad
Simrad AI80 Bedienungsanleitung
Simrad
Simrad IS20 Wind Bedienungsanleitung
Simrad
Simrad EK80 Bedienungsanleitung
Simrad
Simrad AP70 Bedienungsanleitung
Simrad
Simrad ME70 - REV C Bedienungsanleitung
Simrad
Simrad MX610 Bedienungsanleitung
Simrad
Simrad IS80 Heading Repeater HR80 Bedienungsanleitung
Simrad
Simrad AP70 Bedienungsanleitung
Simrad
Simrad IS42J Bedienungsanleitung
Simrad
Simrad MS70 Bedienungsanleitung
Simrad
Simrad NX40 Bedienungsanleitung
Simrad
Simrad TP10 Bedienungsanleitung
Simrad
Simrad IS40 Bedienungsanleitung
Simrad
Simrad CE34 ChartSounder Bedienungsanleitung
Beliebte Schiffsausrüstung Handbücher anderer Marken
Raymarine
Raymarine Maxiview ST80 Benutzerhandbuch
GUIDANCE MARINE
GUIDANCE MARINE 20- Series Montageanleitung
Raymarine
Raymarine ST60 Tridata Benutzerhandbuch
olympia electronics
olympia electronics ΒS-531/1/MAR Bedienungsanleitung
Sonic
Sonic 2024 Bedienungsanleitung
Quicksilver
Quicksilver 88688A25 Handbuch