Simrad SX90 SW 1.3.6 - SOFTWARE RELEASE NOTE REV E Bedienungsanleitung

Introduction

This document describes the

software and other changes introduced

with the following new software

versions:

• ProcessorUnit:SW1.6.5

• BeamformerUnit:SW1.3.6

TheProcessorUnitsoftwareisthe

SX90programthatcontrolsthemenu

system,operationalmodes,features

andpresentations.

TheBeamformerUnitsoftware

controls how the data from the

TransceiverUnitarereceivedand

processedpriortopresentation.

Software changes

The following changes have been

implemented.

• Bugcausingsoftwarecrashes

duringmodechangesisxed

• Audiooutputimplemented

(Turn the page for more information)

• Noiselterfunctionality

improvedbyaddingapost

integrator

(Turn the page for more information)

• Correctionofrollandpitch

readout

• Factorydefaultvaluesimproved

• Minorbugxes

Documentation changes

TheSWupgradeprocedurehasnot

beenrevised,theformerversionBis

stillvalid.

The SX90 Reference Manual

and the SX90 Operator Manual are

bothchanged.TheSX90 Installation

Manualisalsorevised.

How to connect an audio system

totheSX90sonarisexplainedinthe

Software release note

Simrad SX90 SW 1.6.5 / 1.3.6

TECHNOLOGY FOR SUSTAINABLE FISHERIES

www.simrad.com

revised installation manual, and in a

dedicateddocumentprovidedforour

dealers.

Do I need the new

software?

The new release is considered to

beveryimportant,andwerecommend

thatallusersupdatetheirsoftware.

If I do not wish to

upgrade?

Nothinghappensifyoudonot

wishtoupgrade,butyouwillnotbe

abletousethelatestimprovements

providedforthesonar.

(Turn the page for more information)

316866 / Rev.E / January 2009

Kongsberg Maritime AS

Strandpromenaden 50

P. O.Box111

N-3191 Horten,Norway

Simrad

Telephone: +4733034000

Telefax: +4733042987

simrad.sales@simrad.com

www.simrad.com

How do I perform the

update?

Endusersarenotpermittedto

performthissoftwareupdate.Tocarry

outtheupgradeprocedure,youmust

contactyourlocaldealerforadvice.

About the new audio

output

Theaudiooutputisprovidedby

theBeamformerUnit.Youwillneed

toobtainapoweredspeakersystem

andconnectthistotheaudiooutput

ontherearsideofthecomputer.

Theaudiosignalisinterpreted

from the echoes detected under

the audio line, and only from the

horizontaltransmissions.Thesound

isdemodulatedto800Hz,andboth

anexpanderandacompressoris

implementedtoenhancethesound

quality.

The volume must be adjusted on

thespeakersystem.Ifyouwishto

mutetheaudiooutput,youcanpress

the MutebuttonontheOperating

Panel.

Formoreinformationaboutaudio

setupandspeakeroptions,refertothe

document Simrad SX90 Audio setup

procedure[316262].Thisdocument

can be downloaded from our website

www.simrad.com.

About the improved noise

lter functionality

The Noise Filter button on the

Horizontalmenuwillnowprovide

additionalfunctionality.A“post

integrator” has been added, this means

thatthenoiselteringnowtakes

placebothoneachindividualreceiver

channel (as before) and now also after

thebeamforming.

Thelterfunctionshavebeen

implementedasfollows:

• Off:Allltersareswitchedoff

• Weak: Only the receiver channel

lteringisactive

• Medium: The receiver channel

lteringisstronger,andthepost

integrator is active

• Strong: The receiver channel

lteringisstrongest,andthepost

integratorisactive.

WesuggestthattheNoise Filter is

used as follows:

• Weak: This setting does not affect

your targets, we recommend that

thisisyourdefaultsetting.

• Medium:Youwillexperience

moreconsistentechoes.We

recommend this setting for schools

ofsh,butnotforscatteredsh.

Thissettingwillhelpagainst

moderatebottomreverberation.

• Strong:Usethissettingonlyif

youhaveanoiseproblem.

Andere Simrad Sonar Handbücher

Simrad

Simrad SP90 - REV E Bedienungsanleitung

Simrad

Simrad FS20 Bedienungsanleitung

Simrad

Simrad SP60 - REV D Bedienungsanleitung

Simrad

Simrad EY200 Bedienungsanleitung

Simrad

Simrad SX90 - DATASHEET FOR NAVAL AND COAST GUARD REV... Bedienungsanleitung

Simrad

Simrad SH90 - REV A Bedienungsanleitung

Simrad

Simrad PI32 Bedienungsanleitung

Simrad

Simrad StructureScan LSS-1 Montageanleitung

Simrad

Simrad SX90 - DATASHEET FOR NAVAL AND COAST GUARD REV... Bedienungsanleitung

Simrad

Simrad SP90 - REV E Bedienungsanleitung

Simrad

Simrad FM90 Bedienungsanleitung

Simrad

Simrad SH80 - REV C Bedienungsanleitung

Simrad

Simrad EQ60 Bedienungsanleitung

Simrad

Simrad SH90 - REV B Bedienungsanleitung

Simrad

Simrad SN90 Bedienungsanleitung

Simrad

Simrad SP90 - REV E Bedienungsanleitung

Simrad

Simrad SX90 - REV B Bedienungsanleitung

Simrad

Simrad CS90 Bedienungsanleitung

Simrad

Simrad SX95 HULL UNIT - DATASHEET REV A Bedienungsanleitung

Simrad

Simrad NSS7 Bedienungsanleitung

Simrad

Simrad CS90 Bedienungsanleitung

Simrad

Simrad PI44 - INSTALLATION REV A Bedienungsanleitung

Simrad

Simrad CS94 Bedienungsanleitung

Simrad

Simrad SH90 - REV A Bedienungsanleitung

Beliebte Sonar Handbücher anderer Marken

Furuno

Furuno CSH-8L Bedienungsanleitung

Furuno

Furuno CSH-83 Bedienungsanleitung

Kongsberg

Kongsberg Simrad SP90 Series Bedienungsanleitung

Eagle

Eagle TriFinder 2 Bedienungsanleitung

Furuno

Furuno FSV-35 Bedienungsanleitung

Lowrance

Lowrance X-70A Bedienungsanleitung

Furuno

Furuno FSV-75 Bedienungsanleitung

Lowrance

Lowrance LMS-150 GPS Bedienungsanleitung

Lowrance

Lowrance Traditional Bedienungsanleitung

Teledyne

Teledyne BlueView BV3200 Bedienungsanleitung

Reson

Reson SeaBat 7125 SV2 Bedienungsanleitung

Eagle

Eagle 101 Bedienungsanleitung

Furuno

Furuno MF-220 Bedienungsanleitung

IMAGENEX

IMAGENEX 881A-GS Bedienungsanleitung

Furuno

Furuno FSV-75 Bedienungsanleitung

Eagle

Eagle Z-15 Bedienungsanleitung

Hawk

Hawk Sultan Bedienungsanleitung

Lowrance

Lowrance 1240A Bedienungsanleitung