SINAMICS SM120 Bedienungsanleitung

SM120 Module

User Guide V1.01

The symbol alerts the user to important instructions or warnings. The specific

meaning of the symbol is determined by the design contained within the triangle.

In the case of the symbol at left, it is used for general cautions, warnings, or

alerts to danger.

USING THE UNIT SAFELY

Used for instructions intended to alert the user to the risk of death or

severe injury should the unit be used improperly.

Used for instructions intended to alert the user to the risk of injury or

material damage should the unit be used improperly.

*Material damage refers to damage or other adverse effects caused

with respect to the home and all its furnishings, as well to domestic

animals or pets.

The symbol alerts the user to items that must never be carried out (are

forbidden). The specific thing that must not be done is indicated by the design

contained within the circle. In the case of the symbol at left, it means that the

unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specific

thing that must be done is indicated by the design contained within the circle.

In the case of the symbol at left, it means that the power-cord plug must be

unplugged from the outlet.

※About the Symbols

Please connect the power plug with ground protected power outlet.

Do not open (or modify in any way) the unit or its AC adapter.

Do not attempt to repair the unit, or replace parts within it (except when this manual

provides specific instructions directing you to do so).

Never use or store the unit in places that are: Subject to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating

equipment); or are damp (e.g., baths, washrooms, on wet floors); or are humid; or are

exposed to rain; or are dusty; or are subject to high levels of vibration.

When using the unit with a rack or stand, the rack or stand must be carefully placed

so it is level and sure to remain stable. If not using a rack or stand, you still need to

make sure that any location you choose for placing the unit provides a level surface

that will properly support the unit, and keep it from wobbling.

INSTRUCTIONS FOR THE PREVENTION OF FIRE,

ELECTRIC SHOCK, OR INJURY TO PERSONS

About and Notices.

Be sure to use only the AC adapter supplied with the unit. Also, make sure the line

voltage at the installation matches the input voltage specified on the AC adapter’s

body. Other AC adapters may use a different polarity, or be designed for a different

voltage, so their use could result in damage, malfunction, or electric shock.

Use only the attached power-supply cord. Also, the supplied power cord must not be

used with any other device.

Do not excessively twist or bend the power cord, nor place heavy objects on it. It can

damage the cord, producing severed elements and short circuits. Damaged cords may

cause fire and shock hazards!

This unit, either alone or in combination with an amplifier and headphones or

speakers, may be capable of producing sound levels that could cause permanent

hearing loss. Do not operate for a long period of time at a level that is uncomfortable.

If you experience any hearing loss or ringing in the ears, you should immediately stop

using the unit, and consult an audiologist.

Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind

(water, soft drinks, etc.) to penetrate the unit.

Immediately turn the power off and remove the AC adapter from the outlet when:

a. The AC adapter, the power-supply cord, or the plug has been damaged.

b. Smoke or unusual odor occurs.

c. Objects have fallen into, or liquid has been spilled onto the unit.

d. The unit has been exposed to rain (or otherwise has become wet).

e. The unit does not appear to operate normally or exhibits a marked change

in performance.

In Households with small children, an adult should provide supervision until the child

is capable of following all the rules essential for the safe operation of the unit.

Protect the unit from strong impact. (Do not drop it!)

Do not force the unit’s power-supply cord to share an outlet with an unreasonable

number of other devices. Be especially careful when using extension cords-the total

power used by all devices you have connected to the extension cord’s outlet must

never exceed the power rating (watts/amperes) for the extension cord. Excessive

loads can cause the insulation on the cord to heat up and eventually melt trough.

The unit and the AC adapter should be located so their location or position does not

interfere with their proper ventilation.

Always grasp only the plug on the AC adapter cord when plugging into, or unplugging

from, an outlet or this unit.

At regular intervals, you should unplug the AC adapter and clean it by using a dry

cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect

the power plug from the power outlet whenever the unit is to remain unused for an

extended period of time. Any accumulation of dust between the power plug and the

power outlet can result in poor insulation and lead to fire.

Try to prevent cords and cables from becoming entangled. Also, all cords and cables

should be placed so they are out of reach of children.

Never climb on top of, nor place heavy objects on the unit.

Never handle the AC adapter or its plugs with wet hands when plugging into, or

unplugging from, an outlet or this unit.

Before moving the unit, disconnect the AC adapter and all cords coming from

external devices.

Before cleaning the unit, turn off the power and unplug the AC adapter from the outlet.

Whenever you suspect the possibility of lightning in your area, disconnect the AC

adapter from the outlet.

Keep any caps you may remove and the included wing bolts in a safe place out of

children’s reach, so there is no chance of them being swallowed accidentally.

Power supply

● Do not connect this unit to same electrical outlet that is being used by an electrical

appliance that is controlled by an inverter (such as a refrigerator, washing machine,

microwave oven, or air conditioner), or that contains a motor. Depending on the way

in which the electrical appliance is used, power supply noise may cause this unit to

malfunction or may produce audible noise. If it is not practical to use a separate

electrical outlet, connect a power supply noise filter between this unit and the

electrical outlet.

● The AC adapter will begin to generate heat after long hours of consecutive use. This

is normal, and is not a cause for concern.

● Before connecting this unit to other devices, turn off the power to all units. This will

help prevent malfunctions and/or damage to speakers or other devices.

Placement

● Using the unit near power amplifiers (or other equipment containing large power

transformers) may induce hum. To alleviate the problem, change the orientation of

this unit; or move it farther away from the source of interference.

● This device may interfere with radio and television reception. Do not use this device

in the vicinity of such receivers.

1. Screen

This shows the drum kit name in

playing mode, or other information

displays will appear.

2. Volume knob

Adjusts the volume of the unite.

3. [+], [-]

Use these buttons to switch drum

kits or to edit a value.

Pressing the [+] button increases

the value, and pressing the [-]

button decreases it

4. Volume Slider

Slide the buttons to change the

volumes of pads.

5. [CLICK]

Turns the metronome on/off.

The button light flashes when the

metronome is on. Long press the

[CLICK] button to enter the

interface of metronome setting.

6. [♪]

Press this to play back a song or

access the song-related settings.

7. [MUTE]

When a song is playing back, use

this button to mute the drum part.

The button is always light when

the MUTE is on.

8. [COACH]

This activates the Coach function,

allowing you to view your timing

on the screen.

9. [▶丨丨]

Press to play back or stop a song.

10. [LOOP]

Short press to enter into LOOP

interface, and then short press this

button again to play back or stop

the recording. The button light is

always on when the recording.

The metronome is automatically

on when the recording.

Long press to enter into LOOP

settings interface.

TOP PANEL

11. Cursor [< >

]

Use these buttons to move the

cursor on the screen.

12. [OK]

Press this button to save the setting

or enter into submenu.

13. [DRUM]

Press this to access the basic

DRUM screen.

14. [ ]

Press this button to return to upper

level menu. The settings will be saved

when press this button.

15. [MENU]

Press this button to set the menu.

16.[PAD]

Review the sounds, when setting

the sounds, press this button to

listen the sounds. When tempo

setting, hit this button continuously

to set the tempo.

When Loop recording, use this

button instead of a pad for loop

recording.

※Please don’t use drumstick to hit

this pad.

JACK PANEL

ON OFF

1. CRASH 2

Use this jack to add a Crash.

2. TOM 4

Use this jack to add a Tom.

3. PHONE

Use for connecting stereo

headphones.

Using this jack does not mute LINE

OUTPUT.

4. MAIN OUT MONO L/R

Connecting two jack cables send

separate left and right audio signals

down each cable, giving you stereo

output to amplifier and other

external audio equipment.

5. AUX

Use for connecting an external

audio source such as cellphone,

MP3, or CD players. The sound for

this audio source will be output

from both L/R jack and PHONE

jack.

Important notes

6. USB MIDI

Using as MIDI device to connect PC.

7. DC IN jack

Connect the included power adapter

here.

8. POWER

Turns the power on/off.

9. LOCK

Use for locking setting. Switch it

to ON to enable the lock mode, and

the parameter settings cannot be

modified. Switch it to OFF to cancel

the lock mode, and the parameter

settings can be modified.

10. Trigger Input connector

Connecting the special cable

connects the pads and pedals to

the module.

Note:

1. Use the audio cable correctly; otherwise, the device may fail to work properly.

2. This product does not have a sound equipment, requires to connect external audio

equipment such as amplifier, loudspeaker, earphone, etc.

3. The instructions in the manual and the contents on the screen may be different

from the actual ones because your device may be using a more advanced

version of the system.

1/4" TS phone plug

(mono, unbal‐anced)

1. Signal

2. Ground, shielding 1. Signal (left)

2. Signal (right)

3. Ground, shielding

Three-pole 1/8" mini phone jack

(stereo, unbalanced)

Use Guide

To prevent damage to your hearing,

speakers and other audio equipment,

reduce the volume and have the power

off before connecting to any other

equipment. Please make sure you are

using the PHONE output for

headphones and the MONO L/R output

when connecting to amplifiers or mixers.

Quick Use

According to the jack panel instructions,

connect the power supply, audio

equipment, etc. to the module.

Press [POWER] button on the jack panel

to start the unit and enter the main

interface. You can use [-], [+]button to

switch to different drum groups. Use the

drumstick to hit each pad to play.

After playing, press [POWER] button

again to turn off.

DRUM FUNCTION

Press [DRUM] to enter into the home

page as below. You can use [+], [-] or

[<], [>] to switch to different drum kits

on this page.

A. Indicate the number of the current

drum kit. P presents preset kit and

U present user kit.

B. Indicate the pad that triggered.

The icon C2 means Crash 2.

C. Indicate the tempo of metronome.

You can use [∧], [∨] to adjust the

tempo. Short press [CLICK] to turn

on/off the metronome.

D. Indicate the name of drum kit.

The name of user kit can not be

exceed 13 characters.

E. Indicate the velocity of hitting.

The greater the force, the more

diamonds.

F. Indicate cross-stick function.

You can press OK to turn on/off the

cross-stick on this page. The image

XSTCK in above figure shows the

cross-stick is closed.

CLICK FUNCTION

Short press [CLICK] to turn on/off

metronome. When turned on, the

button light will flash.

Long press [CLICK] to enter into the

setting page of metronome (as shown

in the figure below). You can also

enter the metronome setting page

with [MENU] button.

Use [∧], [∨] to select the parameters

to be adjusted. Use [+], [-] to modify

the value or type of the selected

parameter.

Tempo

Use [+], [-] to change the value.

Press [OK] to enter TAP mode. Hit

any pad 4 times, the speed of the

stroke will be calculated.

Range: 20-240.

Beat

Controls the number of clicks per

measure, select from 1 to 16.

1. 2. 3

. 4.

5. 6. 7.

LOOP FUNCTION

Short press [LOOP] to enter into LOOP

mode. Then long press [LOOP] to

enter into the setting of LOOP.

A. TEMPO

It can be set in the settings of

CLICK.

B. BEATS

It also can be set in the settings of

CLICK.

C. MEAS

The number of Meas that will be

recorded.

Range: 1-16

D. The progress of recording

It is recorded based on the section

number and beat.

E. STATE

Displays the current status.

F. PAD

When loop recording, use this button

instead of a pad to trigger the loop.

You can use [<], [>] to choose the

pad that you want.

LOOP RECORDING

In LOOP mode, press [LOOP] again to

enter the recording mode.

At this time, the indicator light is

steady on, metronome automatically

on, strike any pad or pedal to start the

recording. It records in a loop

according to the set number of

sections, and then plays the recorded

rhythm, the user can be in any section

to add the needed rhythm.

Press [LOOP] again to end recording.

Rhythm

7 different click patterns are available.

Volume

Controls the metronome volume.

Range: 0-127.

Pan

Controls the pan of the metronome

output, 0=Fully Left, 64=Centre,

127=Fully Right.

Range: 0-127.

Sound

Controls the sound of the metronome,

there are 5 built into the unit.

COACH FUNCTION

This activates the Coach function,

allowing you to view your timing on

the screen.

ZOOM+

Each time you press [+], the display

of one beat will be magnified. This

lets you view one beat in greater

detail.

ZOOM-

Each time you press [-], the viewing

area will expand. This lets you view

more beats at once.

Note:

1. The unit can only save one loop file,

when record again, the previous

recorded file will be overwritten.

2. If the maximum number of recorded

notes (1000) is exceeded, the

recording will stop automatically.

LOOP PLAYBACK

In LOOP mode, press [▶丨丨]to loop

playback the recorded MIDI.

Press [▶丨丨]again to stop the playing.

LOOP SETTINGS

Long press [LOOP] to enter LOOP

settings. (As shown below)

MEAS

The number of Meas that is recorded.

Range: 1-16

QTZ

Quantize note. Automatically corrects

the recorded beats as the setting value.

This allows you to get cleaner

performances without the tiny time

discrepancies felt in natural

performances.

Value: OFF, 1/4, 1/8, 3/8, 1/16, 3/16,

1/32, 1/64

CLICK

Turn it on to open the metronome and

turn it off to close.

SONG MODE

Press[♪]to enter into song mode.

(As shown below)

A. Song name

It shows the name of the selected

song, using [<], [>] to switch songs.

B. Song volume

Use [+], [-] to adjust the volume.

C. The image for loop playback

Press[∧], mark the starting point

of loop play and display “(”

Press [∧] again, mark the end of

the loop and display “(→

←)”.

Press [∧] a third time, close the

loop playback.

Note:

The minimum loop length of the

built-in song is one section, and

the maximum loop length is the

whole song.

D. Playback Progress

The current progress of the song.

Playing a song

press [▶丨丨]to play the song.

Press [▶丨丨]again to stop the playing.

Each time you press [MUTE], the

drum part will be muted or nu-muted.

Inhaltsverzeichnis

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung